61-6949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
FeaturesFeatures class="init">
61-6949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
特徴
- By combining two lenses with different refractive index wavelength dispersion into a single lens, chromatic aberration and spherical aberration can be reduced compared to a single spherical lens.
- It can be used as a condenser lens for near infrared LD or YAG laser (1064 nm).
- Optimization by lens design results in little change in focal length in the near infrared.
- The focal lengths of 700 nm, 880 nm, and 1100 nm match and are optimized to minimize aberration.
- Since not only chromatic aberration but also spherical aberration is well corrected, it is ideal as a collimating lens for laser.
- It is corrected not only for aberrations of the on-axis object point, but also for off-axis coma and astigmatism.
- Air gap type condensing lens (NYTL/NYDL) for laser processing is also available.
- * Use an achromatic lens when you want to focus an image at infinity or when you want to use a point light source that is parallel to the image.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The chromatic lens has an orientation that allows parallel light to enter the lens.
- * This function allows parallel light to enter from the side of the face with a small radius of curvature (the face pointed to by the arrow).
- * When parallel light is incident from the opposite side, chromatic aberration and spherical aberration occur, and the condensing spot becomes larger.
- Chromatic aberration and spherical aberration increase when the camera is used in the visible range. Also, the transparency may be poor.
Spec
- [
common specification]
- Material: N-LAK22/SF6
- Design wavelength: 700nm 880nm 1100nm
- Coating: Multi-layered reflective prevention film (700 - 1550nm)
- Adhesive: Ultraviolet curing type adhesive
- Laser durability: 0.3J/cm2
- Scratch - dig: 40-20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Outer diameter φD: φ15mm
- Focal length f: 50.2mm
- Center thickness tc: 5.9mm
- Edge thickness te: 4.9mm
- Back focus fb: 46.8mm
- Eccentricity: < 3′
- RoHS conform product
-
アズワン品番
61-6949-34
型番
DL-15-50PNIR
標準価格
JPY: 11,500
USD: 71.55
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6949-31
Near Infrared Achromatic Lens Focal Length: 19.9mm DL-15-20PNIR
DL-15-20PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-32
Near Infrared Achromatic Lens Focal Length: 25mm DL-15-25PNIR
DL-15-25PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-33
Near Infrared Achromatic Lens Focal Length: 30.1mm DL-15-30PNIR
DL-15-30PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-34
Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
DL-15-50PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-35
Near Infrared Achromatic Lens Focal Length: 30mm DL-25-30PNIR
DL-25-30PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-36
Near Infrared Achromatic Lens Focal Length: 40.1mm DL-25-40PNIR
DL-25-40PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-37
Near Infrared Achromatic Lens Focal Length: 50.2mm DL-25-50PNIR
DL-25-50PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-38
Near Infrared Achromatic Lens Focal Length: 100.4mm DL-25-100PNIR
DL-25-100PNIR
1piece
JPY: 12,400
USD: 77.15
This page is the page of Near Infrared Achromatic Lens Focal Length: 50.2mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Near Infrared Achromatic Lens Focal Length: 50.2mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR 【AXEL GLOBAL】ASONE
Contact us
SIGMAKOKI CO., LTD.
61-6949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
Features
- By combining two lenses with different refractive index wavelength dispersion into a single lens, chromatic aberration and spherical aberration can be reduced compared to a single spherical lens.
- It can be used as a condenser lens for near infrared LD or YAG laser (1064 nm).
- Optimization by lens design results in little change in focal length in the near infrared.
- The focal lengths of 700 nm, 880 nm, and 1100 nm match and are optimized to minimize aberration.
- Since not only chromatic aberration but also spherical aberration is well corrected, it is ideal as a collimating lens for laser.
- It is corrected not only for aberrations of the on-axis object point, but also for off-axis coma and astigmatism.
- Air gap type condensing lens (NYTL/NYDL) for laser processing is also available.
- * Use an achromatic lens when you want to focus an image at infinity or when you want to use a point light source that is parallel to the image.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The chromatic lens has an orientation that allows parallel light to enter the lens.
- * This function allows parallel light to enter from the side of the face with a small radius of curvature (the face pointed to by the arrow).
- * When parallel light is incident from the opposite side, chromatic aberration and spherical aberration occur, and the condensing spot becomes larger.
- Chromatic aberration and spherical aberration increase when the camera is used in the visible range. Also, the transparency may be poor.
Spec
- [
common specification]
- Material: N-LAK22/SF6
- Design wavelength: 700nm 880nm 1100nm
- Coating: Multi-layered reflective prevention film (700 - 1550nm)
- Adhesive: Ultraviolet curing type adhesive
- Laser durability: 0.3J/cm2
- Scratch - dig: 40-20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Outer diameter φD: φ15mm
- Focal length f: 50.2mm
- Center thickness tc: 5.9mm
- Edge thickness te: 4.9mm
- Back focus fb: 46.8mm
- Eccentricity: < 3′
- RoHS conform product
-
Order No.
61-6949-34
Model No.
DL-15-50PNIR
Standard price
JPY: 11,500
USD: 71.55
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6949-31
Near Infrared Achromatic Lens Focal Length: 19.9mm DL-15-20PNIR
DL-15-20PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-32
Near Infrared Achromatic Lens Focal Length: 25mm DL-15-25PNIR
DL-15-25PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-33
Near Infrared Achromatic Lens Focal Length: 30.1mm DL-15-30PNIR
DL-15-30PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-34
Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
DL-15-50PNIR
1piece
JPY: 11,500
USD: 71.55
61-6949-35
Near Infrared Achromatic Lens Focal Length: 30mm DL-25-30PNIR
DL-25-30PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-36
Near Infrared Achromatic Lens Focal Length: 40.1mm DL-25-40PNIR
DL-25-40PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-37
Near Infrared Achromatic Lens Focal Length: 50.2mm DL-25-50PNIR
DL-25-50PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-38
Near Infrared Achromatic Lens Focal Length: 100.4mm DL-25-100PNIR
DL-25-100PNIR
1piece
JPY: 12,400
USD: 77.15
61-6949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
特徴
- By combining two lenses with different refractive index wavelength dispersion into a single lens, chromatic aberration and spherical aberration can be reduced compared to a single spherical lens.
- It can be used as a condenser lens for near infrared LD or YAG laser (1064 nm).
- Optimization by lens design results in little change in focal length in the near infrared.
- The focal lengths of 700 nm, 880 nm, and 1100 nm match and are optimized to minimize aberration.
- Since not only chromatic aberration but also spherical aberration is well corrected, it is ideal as a collimating lens for laser.
- It is corrected not only for aberrations of the on-axis object point, but also for off-axis coma and astigmatism.
- Air gap type condensing lens (NYTL/NYDL) for laser processing is also available.
- * Use an achromatic lens when you want to focus an image at infinity or when you want to use a point light source that is parallel to the image.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The chromatic lens has an orientation that allows parallel light to enter the lens.
- * This function allows parallel light to enter from the side of the face with a small radius of curvature (the face pointed to by the arrow).
- * When parallel light is incident from the opposite side, chromatic aberration and spherical aberration occur, and the condensing spot becomes larger.
- Chromatic aberration and spherical aberration increase when the camera is used in the visible range. Also, the transparency may be poor.
Spec
- [
common specification] - Material: N-LAK22/SF6
- Design wavelength: 700nm 880nm 1100nm
- Coating: Multi-layered reflective prevention film (700 - 1550nm)
- Adhesive: Ultraviolet curing type adhesive
- Laser durability: 0.3J/cm2
- Scratch - dig: 40-20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Outer diameter φD: φ15mm
- Focal length f: 50.2mm
- Center thickness tc: 5.9mm
- Edge thickness te: 4.9mm
- Back focus fb: 46.8mm
- Eccentricity: < 3′
- RoHS conform product
| アズワン品番 | 61-6949-34 | |
|---|---|---|
| 型番 | DL-15-50PNIR | |
| 標準価格 |
JPY: 11,500
USD: 71.55
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6949-31 | Near Infrared Achromatic Lens Focal Length: 19.9mm DL-15-20PNIR | DL-15-20PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-32 | Near Infrared Achromatic Lens Focal Length: 25mm DL-15-25PNIR | DL-15-25PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-33 | Near Infrared Achromatic Lens Focal Length: 30.1mm DL-15-30PNIR | DL-15-30PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-34 | Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR | DL-15-50PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-35 | Near Infrared Achromatic Lens Focal Length: 30mm DL-25-30PNIR | DL-25-30PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
|
|
61-6949-36 | Near Infrared Achromatic Lens Focal Length: 40.1mm DL-25-40PNIR | DL-25-40PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
|
|
61-6949-37 | Near Infrared Achromatic Lens Focal Length: 50.2mm DL-25-50PNIR | DL-25-50PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
|
|
61-6949-38 | Near Infrared Achromatic Lens Focal Length: 100.4mm DL-25-100PNIR | DL-25-100PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
This page is the page of Near Infrared Achromatic Lens Focal Length: 50.2mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Near Infrared Achromatic Lens Focal Length: 50.2mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR 【AXEL GLOBAL】ASONE
61-6949-34 Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR
Features
- By combining two lenses with different refractive index wavelength dispersion into a single lens, chromatic aberration and spherical aberration can be reduced compared to a single spherical lens.
- It can be used as a condenser lens for near infrared LD or YAG laser (1064 nm).
- Optimization by lens design results in little change in focal length in the near infrared.
- The focal lengths of 700 nm, 880 nm, and 1100 nm match and are optimized to minimize aberration.
- Since not only chromatic aberration but also spherical aberration is well corrected, it is ideal as a collimating lens for laser.
- It is corrected not only for aberrations of the on-axis object point, but also for off-axis coma and astigmatism.
- Air gap type condensing lens (NYTL/NYDL) for laser processing is also available.
- * Use an achromatic lens when you want to focus an image at infinity or when you want to use a point light source that is parallel to the image.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The chromatic lens has an orientation that allows parallel light to enter the lens.
- * This function allows parallel light to enter from the side of the face with a small radius of curvature (the face pointed to by the arrow).
- * When parallel light is incident from the opposite side, chromatic aberration and spherical aberration occur, and the condensing spot becomes larger.
- Chromatic aberration and spherical aberration increase when the camera is used in the visible range. Also, the transparency may be poor.
Spec
- [
common specification] - Material: N-LAK22/SF6
- Design wavelength: 700nm 880nm 1100nm
- Coating: Multi-layered reflective prevention film (700 - 1550nm)
- Adhesive: Ultraviolet curing type adhesive
- Laser durability: 0.3J/cm2
- Scratch - dig: 40-20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Outer diameter φD: φ15mm
- Focal length f: 50.2mm
- Center thickness tc: 5.9mm
- Edge thickness te: 4.9mm
- Back focus fb: 46.8mm
- Eccentricity: < 3′
- RoHS conform product
| Order No. | 61-6949-34 | |
|---|---|---|
| Model No. | DL-15-50PNIR | |
| Standard price |
JPY: 11,500
USD: 71.55
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6949-31 | Near Infrared Achromatic Lens Focal Length: 19.9mm DL-15-20PNIR | DL-15-20PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-32 | Near Infrared Achromatic Lens Focal Length: 25mm DL-15-25PNIR | DL-15-25PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-33 | Near Infrared Achromatic Lens Focal Length: 30.1mm DL-15-30PNIR | DL-15-30PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-34 | Near Infrared Achromatic Lens Focal Length: 50.2mm DL-15-50PNIR | DL-15-50PNIR | 1piece | JPY: 11,500 | USD: 71.55 |
|
|
|
61-6949-35 | Near Infrared Achromatic Lens Focal Length: 30mm DL-25-30PNIR | DL-25-30PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
|
|
61-6949-36 | Near Infrared Achromatic Lens Focal Length: 40.1mm DL-25-40PNIR | DL-25-40PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
|
|
61-6949-37 | Near Infrared Achromatic Lens Focal Length: 50.2mm DL-25-50PNIR | DL-25-50PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|
|
|
61-6949-38 | Near Infrared Achromatic Lens Focal Length: 100.4mm DL-25-100PNIR | DL-25-100PNIR | 1piece | JPY: 12,400 | USD: 77.15 |
|