61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
FeaturesCheck the Series Lineup"init">
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
Features
- This is a highly reflective mirror with an adjustment mechanism, in which a surface accuracy guaranteeing mirror (HTFM) is set in a kinematic mirror holder and bonded so as not to apply stress to the mirror.
- This product guarantees the surface accuracy of the mirror after incorporating and bonding the mirror to the holder.
- There are two types of mirror holders: high-stability type (MHG-HS) and mass-produced type (MHG-MP).
- This product can be used to configure optical systems, interferometers, etc. that require high wavefront accuracy.
- The mass-produced model (MHG-MP) has an adjustment screw locking mechanism.
- Can be attached to rod RO -** (sold separately) or post stand PS -** (sold separately).
- The reflectance wavelength characteristic is shown in the graph of the Surface Accuracy Guarantee Mirror (HTFM).
- * The mirror surface comes out 2 mm in front of the holder mounting surface.
- * Once the glued mirror is removed, the surface accuracy of the mirror is not guaranteed.
- * If a strong impact is applied to the holder or mirror, the surface accuracy of the mirror may be deteriorated.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when using the rod mounting plate (MHG -** BPRO).
- * Surface accuracy guarantee data is not attached to the product.
Spec
- [
common specification]
- Holder section, number of movable axes: HTFM-MHG-HS : 3 axes, HTFM-MHG-MP: 2 axes (HTFM-12.7C08-MHG-MP: 3 axes)
- Holder section, main material: Aluminum (HTFM-12.7C08-MHG-MP: Brass)
- Holder section, surface treatment: Black anodic oxide (HTFM-12.7C08-MHG-MP: Super black chrome)
- Mirror part, material: Synthetic quartz
- Mirror part, coating: Dielectric multi-layered film
- Mirror part, incident angle: 45°±3°
- Mirror part, surface accuracy: After holder adheres λ/10
- Mirror part, scratch - dig: 10?5
- Mirror part, effective diameter: 80% of the outer diameter
- Mirror part, back: Optical polishing
- [Individual specification]
- Adaptive wavelength: 308nm
- Optics diameter φD: φ12.7mm
- Reflective ratio: ＞99.5％
- Holder product number: MHG-MP12.7
- Adjustment range (tilt): ±3°
- Adjustment range (rotation): ±3°
- Resolution (tilt): Approximately 0.74°/rotation
- Resolution (rotation): Approximately 0.74°/rotation
- Mass: 0.04kg
- RoHS conform product
-
アズワン品番
61-6948-12
型番
HTFM-12.7C08-308-MHG-MP
標準価格
JPY: 53,400
USD: 334.96
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
Stock in Japan
Supplier Stock
Product VariationsProduct Variations">
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
特徴
- This is a highly reflective mirror with an adjustment mechanism, in which a surface accuracy guaranteeing mirror (HTFM) is set in a kinematic mirror holder and bonded so as not to apply stress to the mirror.
- This product guarantees the surface accuracy of the mirror after incorporating and bonding the mirror to the holder.
- There are two types of mirror holders: high-stability type (MHG-HS) and mass-produced type (MHG-MP).
- This product can be used to configure optical systems, interferometers, etc. that require high wavefront accuracy.
- The mass-produced model (MHG-MP) has an adjustment screw locking mechanism.
- Can be attached to rod RO -** (sold separately) or post stand PS -** (sold separately).
- The reflectance wavelength characteristic is shown in the graph of the Surface Accuracy Guarantee Mirror (HTFM).
- * The mirror surface comes out 2 mm in front of the holder mounting surface.
- * Once the glued mirror is removed, the surface accuracy of the mirror is not guaranteed.
- * If a strong impact is applied to the holder or mirror, the surface accuracy of the mirror may be deteriorated.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when using the rod mounting plate (MHG -** BPRO).
- * Surface accuracy guarantee data is not attached to the product.
仕様
- [
common specification]
- Holder section, number of movable axes: HTFM-MHG-HS : 3 axes, HTFM-MHG-MP: 2 axes (HTFM-12.7C08-MHG-MP: 3 axes)
- Holder section, main material: Aluminum (HTFM-12.7C08-MHG-MP: Brass)
- Holder section, surface treatment: Black anodic oxide (HTFM-12.7C08-MHG-MP: Super black chrome)
- Mirror part, material: Synthetic quartz
- Mirror part, coating: Dielectric multi-layered film
- Mirror part, incident angle: 45°±3°
- Mirror part, surface accuracy: After holder adheres λ/10
- Mirror part, scratch - dig: 10?5
- Mirror part, effective diameter: 80% of the outer diameter
- Mirror part, back: Optical polishing
- [Individual specification]
- Adaptive wavelength: 308nm
- Optics diameter φD: φ12.7mm
- Reflective ratio: ＞99.5％
- Holder product number: MHG-MP12.7
- Adjustment range (tilt): ±3°
- Adjustment range (rotation): ±3°
- Resolution (tilt): Approximately 0.74°/rotation
- Resolution (rotation): Approximately 0.74°/rotation
- Mass: 0.04kg
- RoHS conform product
-
アズワン品番
61-6948-12
型番
HTFM-12.7C08-308-MHG-MP
標準価格
JPY: 53,400
USD: 334.96
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
Model No.
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6947-97
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 12.7mm HTFM-12.7C08-248-MHG-MP
HTFM-12.7C08-248-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6947-98
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 25.4mm HTFM-25.4C08-248-MHG-MP
HTFM-25.4C08-248-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6947-99
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 25.4mm HTFM-25.4C08-248-MHG-HS
HTFM-25.4C08-248-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-01
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 30mm HTFM-30C08-248-MHG-MP
HTFM-30C08-248-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-02
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 30mm HTFM-30C08-248-MHG-HS
HTFM-30C08-248-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-03
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 50mm HTFM-50C11-248-MHG-MP
HTFM-50C11-248-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-04
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 50.8mm HTFM-50.8C11-248-MHG-MP
HTFM-50.8C11-248-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-05
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 12.7mm HTFM-12.7C08-266-MHG-MP
HTFM-12.7C08-266-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-06
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 25.4mm HTFM-25.4C08-266-MHG-MP
HTFM-25.4C08-266-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-07
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 25.4mm HTFM-25.4C08-266-MHG-HS
HTFM-25.4C08-266-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-08
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 30mm HTFM-30C08-266-MHG-MP
HTFM-30C08-266-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-09
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 30mm HTFM-30C08-266-MHG-HS
HTFM-30C08-266-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-10
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 50mm HTFM-50C11-266-MHG-MP
HTFM-50C11-266-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-11
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 50.8mm HTFM-50.8C11-266-MHG-MP
HTFM-50.8C11-266-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-12
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
HTFM-12.7C08-308-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-13
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 25.4mm HTFM-25.4C08-308-MHG-MP
HTFM-25.4C08-308-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-14
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 25.4mm HTFM-25.4C08-308-MHG-HS
HTFM-25.4C08-308-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-15
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 30mm HTFM-30C08-308-MHG-MP
HTFM-30C08-308-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-16
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 30mm HTFM-30C08-308-MHG-HS
HTFM-30C08-308-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-17
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 50mm HTFM-50C11-308-MHG-MP
HTFM-50C11-308-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-18
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 50.8mm HTFM-50.8C11-308-MHG-MP
HTFM-50.8C11-308-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-19
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 12.7mm HTFM-12.7C08-355-MHG-MP
HTFM-12.7C08-355-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-20
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 25.4mm HTFM-25.4C08-355-MHG-MP
HTFM-25.4C08-355-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-21
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 25.4mm HTFM-25.4C08-355-MHG-HS
HTFM-25.4C08-355-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-22
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 30mm HTFM-30C08-355-MHG-MP
HTFM-30C08-355-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-23
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 30mm HTFM-30C08-355-MHG-HS
HTFM-30C08-355-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-24
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 50mm HTFM-50C11-355-MHG-MP
HTFM-50C11-355-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-25
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 50.8mm HTFM-50.8C11-355-MHG-MP
HTFM-50.8C11-355-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-26
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 12.7mm HTFM-12.7C08-532-MHG-MP
HTFM-12.7C08-532-MHG-MP
1piece
JPY: 33,600
USD: 210.76
61-6948-27
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 25.4mm HTFM-25.4C08-532-MHG-MP
HTFM-25.4C08-532-MHG-MP
1piece
JPY: 33,600
USD: 210.76
61-6948-28
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 25.4mm HTFM-25.4C08-532-MHG-HS
HTFM-25.4C08-532-MHG-HS
1piece
JPY: 35,600
USD: 223.31
61-6948-29
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 30mm HTFM-30C08-532-MHG-MP
HTFM-30C08-532-MHG-MP
1piece
JPY: 35,600
USD: 223.31
61-6948-32
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 50.8mm HTFM-50.8C11-532-MHG-MP
HTFM-50.8C11-532-MHG-MP
1piece
JPY: 69,300
USD: 434.70
61-6948-33
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 12.7mm HTFM-12.7C08-1064-MHG-MP
HTFM-12.7C08-1064-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-34
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 25.4mm HTFM-25.4C08-1064-MHG-MP
HTFM-25.4C08-1064-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-35
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 25.4mm HTFM-25.4C08-1064-MHG-HS
HTFM-25.4C08-1064-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-36
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 30mm HTFM-30C08-1064-MHG-MP
HTFM-30C08-1064-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-37
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 30mm HTFM-30C08-1064-MHG-HS
HTFM-30C08-1064-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-38
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 50mm HTFM-50C11-1064-MHG-MP
HTFM-50C11-1064-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-39
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 50.8mm HTFM-50.8C11-1064-MHG-MP
HTFM-50.8C11-1064-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-30
［Discontinued］Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 30mm HTFM-50C11-532-MHG-MP
HTFM-50C11-532-MHG-MP
1piece
JPY: 63,000
USD: 395.18
-
61-6948-31
［Discontinued］Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 50mm HTFM-30C08-532-MHG-HS
HTFM-30C08-532-MHG-HS
1piece
JPY: 34,200
USD: 214.53
-
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
Features
- This is a highly reflective mirror with an adjustment mechanism, in which a surface accuracy guaranteeing mirror (HTFM) is set in a kinematic mirror holder and bonded so as not to apply stress to the mirror.
- This product guarantees the surface accuracy of the mirror after incorporating and bonding the mirror to the holder.
- There are two types of mirror holders: high-stability type (MHG-HS) and mass-produced type (MHG-MP).
- This product can be used to configure optical systems, interferometers, etc. that require high wavefront accuracy.
- The mass-produced model (MHG-MP) has an adjustment screw locking mechanism.
- Can be attached to rod RO -** (sold separately) or post stand PS -** (sold separately).
- The reflectance wavelength characteristic is shown in the graph of the Surface Accuracy Guarantee Mirror (HTFM).
- * The mirror surface comes out 2 mm in front of the holder mounting surface.
- * Once the glued mirror is removed, the surface accuracy of the mirror is not guaranteed.
- * If a strong impact is applied to the holder or mirror, the surface accuracy of the mirror may be deteriorated.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when using the rod mounting plate (MHG -** BPRO).
- * Surface accuracy guarantee data is not attached to the product.
Spec
- [
common specification] - Holder section, number of movable axes: HTFM-MHG-HS : 3 axes, HTFM-MHG-MP: 2 axes (HTFM-12.7C08-MHG-MP: 3 axes)
- Holder section, main material: Aluminum (HTFM-12.7C08-MHG-MP: Brass)
- Holder section, surface treatment: Black anodic oxide (HTFM-12.7C08-MHG-MP: Super black chrome)
- Mirror part, material: Synthetic quartz
- Mirror part, coating: Dielectric multi-layered film
- Mirror part, incident angle: 45°±3°
- Mirror part, surface accuracy: After holder adheres λ/10
- Mirror part, scratch - dig: 10?5
- Mirror part, effective diameter: 80% of the outer diameter
- Mirror part, back: Optical polishing
- [Individual specification]
- Adaptive wavelength: 308nm
- Optics diameter φD: φ12.7mm
- Reflective ratio: ＞99.5％
- Holder product number: MHG-MP12.7
- Adjustment range (tilt): ±3°
- Adjustment range (rotation): ±3°
- Resolution (tilt): Approximately 0.74°/rotation
- Resolution (rotation): Approximately 0.74°/rotation
- Mass: 0.04kg
- RoHS conform product
| アズワン品番 | 61-6948-12 | |
|---|---|---|
| 型番 | HTFM-12.7C08-308-MHG-MP | |
| 標準価格 |
JPY: 53,400
USD: 334.96
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product VariationsProduct Variations">
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
特徴
- This is a highly reflective mirror with an adjustment mechanism, in which a surface accuracy guaranteeing mirror (HTFM) is set in a kinematic mirror holder and bonded so as not to apply stress to the mirror.
- This product guarantees the surface accuracy of the mirror after incorporating and bonding the mirror to the holder.
- There are two types of mirror holders: high-stability type (MHG-HS) and mass-produced type (MHG-MP).
- This product can be used to configure optical systems, interferometers, etc. that require high wavefront accuracy.
- The mass-produced model (MHG-MP) has an adjustment screw locking mechanism.
- Can be attached to rod RO -** (sold separately) or post stand PS -** (sold separately).
- The reflectance wavelength characteristic is shown in the graph of the Surface Accuracy Guarantee Mirror (HTFM).
- * The mirror surface comes out 2 mm in front of the holder mounting surface.
- * Once the glued mirror is removed, the surface accuracy of the mirror is not guaranteed.
- * If a strong impact is applied to the holder or mirror, the surface accuracy of the mirror may be deteriorated.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when using the rod mounting plate (MHG -** BPRO).
- * Surface accuracy guarantee data is not attached to the product.
仕様
- [
common specification]
- Holder section, number of movable axes: HTFM-MHG-HS : 3 axes, HTFM-MHG-MP: 2 axes (HTFM-12.7C08-MHG-MP: 3 axes)
- Holder section, main material: Aluminum (HTFM-12.7C08-MHG-MP: Brass)
- Holder section, surface treatment: Black anodic oxide (HTFM-12.7C08-MHG-MP: Super black chrome)
- Mirror part, material: Synthetic quartz
- Mirror part, coating: Dielectric multi-layered film
- Mirror part, incident angle: 45°±3°
- Mirror part, surface accuracy: After holder adheres λ/10
- Mirror part, scratch - dig: 10?5
- Mirror part, effective diameter: 80% of the outer diameter
- Mirror part, back: Optical polishing
- [Individual specification]
- Adaptive wavelength: 308nm
- Optics diameter φD: φ12.7mm
- Reflective ratio: ＞99.5％
- Holder product number: MHG-MP12.7
- Adjustment range (tilt): ±3°
- Adjustment range (rotation): ±3°
- Resolution (tilt): Approximately 0.74°/rotation
- Resolution (rotation): Approximately 0.74°/rotation
- Mass: 0.04kg
- RoHS conform product
-
アズワン品番
61-6948-12
型番
HTFM-12.7C08-308-MHG-MP
標準価格
JPY: 53,400
USD: 334.96
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
Model No.
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6947-97
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 12.7mm HTFM-12.7C08-248-MHG-MP
HTFM-12.7C08-248-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6947-98
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 25.4mm HTFM-25.4C08-248-MHG-MP
HTFM-25.4C08-248-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6947-99
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 25.4mm HTFM-25.4C08-248-MHG-HS
HTFM-25.4C08-248-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-01
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 30mm HTFM-30C08-248-MHG-MP
HTFM-30C08-248-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-02
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 30mm HTFM-30C08-248-MHG-HS
HTFM-30C08-248-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-03
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 50mm HTFM-50C11-248-MHG-MP
HTFM-50C11-248-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-04
Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 50.8mm HTFM-50.8C11-248-MHG-MP
HTFM-50.8C11-248-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-05
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 12.7mm HTFM-12.7C08-266-MHG-MP
HTFM-12.7C08-266-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-06
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 25.4mm HTFM-25.4C08-266-MHG-MP
HTFM-25.4C08-266-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-07
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 25.4mm HTFM-25.4C08-266-MHG-HS
HTFM-25.4C08-266-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-08
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 30mm HTFM-30C08-266-MHG-MP
HTFM-30C08-266-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-09
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 30mm HTFM-30C08-266-MHG-HS
HTFM-30C08-266-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-10
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 50mm HTFM-50C11-266-MHG-MP
HTFM-50C11-266-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-11
Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 50.8mm HTFM-50.8C11-266-MHG-MP
HTFM-50.8C11-266-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-12
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
HTFM-12.7C08-308-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-13
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 25.4mm HTFM-25.4C08-308-MHG-MP
HTFM-25.4C08-308-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-14
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 25.4mm HTFM-25.4C08-308-MHG-HS
HTFM-25.4C08-308-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-15
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 30mm HTFM-30C08-308-MHG-MP
HTFM-30C08-308-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-16
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 30mm HTFM-30C08-308-MHG-HS
HTFM-30C08-308-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-17
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 50mm HTFM-50C11-308-MHG-MP
HTFM-50C11-308-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-18
Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 50.8mm HTFM-50.8C11-308-MHG-MP
HTFM-50.8C11-308-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-19
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 12.7mm HTFM-12.7C08-355-MHG-MP
HTFM-12.7C08-355-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-20
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 25.4mm HTFM-25.4C08-355-MHG-MP
HTFM-25.4C08-355-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-21
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 25.4mm HTFM-25.4C08-355-MHG-HS
HTFM-25.4C08-355-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-22
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 30mm HTFM-30C08-355-MHG-MP
HTFM-30C08-355-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-23
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 30mm HTFM-30C08-355-MHG-HS
HTFM-30C08-355-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-24
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 50mm HTFM-50C11-355-MHG-MP
HTFM-50C11-355-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-25
Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 50.8mm HTFM-50.8C11-355-MHG-MP
HTFM-50.8C11-355-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-26
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 12.7mm HTFM-12.7C08-532-MHG-MP
HTFM-12.7C08-532-MHG-MP
1piece
JPY: 33,600
USD: 210.76
61-6948-27
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 25.4mm HTFM-25.4C08-532-MHG-MP
HTFM-25.4C08-532-MHG-MP
1piece
JPY: 33,600
USD: 210.76
61-6948-28
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 25.4mm HTFM-25.4C08-532-MHG-HS
HTFM-25.4C08-532-MHG-HS
1piece
JPY: 35,600
USD: 223.31
61-6948-29
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 30mm HTFM-30C08-532-MHG-MP
HTFM-30C08-532-MHG-MP
1piece
JPY: 35,600
USD: 223.31
61-6948-32
Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 50.8mm HTFM-50.8C11-532-MHG-MP
HTFM-50.8C11-532-MHG-MP
1piece
JPY: 69,300
USD: 434.70
61-6948-33
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 12.7mm HTFM-12.7C08-1064-MHG-MP
HTFM-12.7C08-1064-MHG-MP
1piece
JPY: 53,400
USD: 334.96
61-6948-34
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 25.4mm HTFM-25.4C08-1064-MHG-MP
HTFM-25.4C08-1064-MHG-MP
1piece
JPY: 54,400
USD: 341.24
61-6948-35
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 25.4mm HTFM-25.4C08-1064-MHG-HS
HTFM-25.4C08-1064-MHG-HS
1piece
JPY: 56,400
USD: 353.78
61-6948-36
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 30mm HTFM-30C08-1064-MHG-MP
HTFM-30C08-1064-MHG-MP
1piece
JPY: 56,400
USD: 353.78
61-6948-37
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 30mm HTFM-30C08-1064-MHG-HS
HTFM-30C08-1064-MHG-HS
1piece
JPY: 58,400
USD: 366.33
61-6948-38
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 50mm HTFM-50C11-1064-MHG-MP
HTFM-50C11-1064-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-39
Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 50.8mm HTFM-50.8C11-1064-MHG-MP
HTFM-50.8C11-1064-MHG-MP
1piece
JPY: 85,100
USD: 533.81
61-6948-30
［Discontinued］Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 30mm HTFM-50C11-532-MHG-MP
HTFM-50C11-532-MHG-MP
1piece
JPY: 63,000
USD: 395.18
-
61-6948-31
［Discontinued］Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 50mm HTFM-30C08-532-MHG-HS
HTFM-30C08-532-MHG-HS
1piece
JPY: 34,200
USD: 214.53
-
61-6948-12 Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP
特徴
- This is a highly reflective mirror with an adjustment mechanism, in which a surface accuracy guaranteeing mirror (HTFM) is set in a kinematic mirror holder and bonded so as not to apply stress to the mirror.
- This product guarantees the surface accuracy of the mirror after incorporating and bonding the mirror to the holder.
- There are two types of mirror holders: high-stability type (MHG-HS) and mass-produced type (MHG-MP).
- This product can be used to configure optical systems, interferometers, etc. that require high wavefront accuracy.
- The mass-produced model (MHG-MP) has an adjustment screw locking mechanism.
- Can be attached to rod RO -** (sold separately) or post stand PS -** (sold separately).
- The reflectance wavelength characteristic is shown in the graph of the Surface Accuracy Guarantee Mirror (HTFM).
- * The mirror surface comes out 2 mm in front of the holder mounting surface.
- * Once the glued mirror is removed, the surface accuracy of the mirror is not guaranteed.
- * If a strong impact is applied to the holder or mirror, the surface accuracy of the mirror may be deteriorated.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when using the rod mounting plate (MHG -** BPRO).
- * Surface accuracy guarantee data is not attached to the product.
仕様
- [
common specification] - Holder section, number of movable axes: HTFM-MHG-HS : 3 axes, HTFM-MHG-MP: 2 axes (HTFM-12.7C08-MHG-MP: 3 axes)
- Holder section, main material: Aluminum (HTFM-12.7C08-MHG-MP: Brass)
- Holder section, surface treatment: Black anodic oxide (HTFM-12.7C08-MHG-MP: Super black chrome)
- Mirror part, material: Synthetic quartz
- Mirror part, coating: Dielectric multi-layered film
- Mirror part, incident angle: 45°±3°
- Mirror part, surface accuracy: After holder adheres λ/10
- Mirror part, scratch - dig: 10?5
- Mirror part, effective diameter: 80% of the outer diameter
- Mirror part, back: Optical polishing
- [Individual specification]
- Adaptive wavelength: 308nm
- Optics diameter φD: φ12.7mm
- Reflective ratio: ＞99.5％
- Holder product number: MHG-MP12.7
- Adjustment range (tilt): ±3°
- Adjustment range (rotation): ±3°
- Resolution (tilt): Approximately 0.74°/rotation
- Resolution (rotation): Approximately 0.74°/rotation
- Mass: 0.04kg
- RoHS conform product
| アズワン品番 | 61-6948-12 | |
|---|---|---|
| 型番 | HTFM-12.7C08-308-MHG-MP | |
| 標準価格 |
JPY: 53,400
USD: 334.96
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | Model No. | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6947-97 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 12.7mm HTFM-12.7C08-248-MHG-MP | HTFM-12.7C08-248-MHG-MP | 1piece | JPY: 53,400 | USD: 334.96 |
|
|
|
61-6947-98 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 25.4mm HTFM-25.4C08-248-MHG-MP | HTFM-25.4C08-248-MHG-MP | 1piece | JPY: 54,400 | USD: 341.24 |
|
|
|
61-6947-99 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 25.4mm HTFM-25.4C08-248-MHG-HS | HTFM-25.4C08-248-MHG-HS | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-01 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 30mm HTFM-30C08-248-MHG-MP | HTFM-30C08-248-MHG-MP | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-02 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 30mm HTFM-30C08-248-MHG-HS | HTFM-30C08-248-MHG-HS | 1piece | JPY: 58,400 | USD: 366.33 |
|
|
|
61-6948-03 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 50mm HTFM-50C11-248-MHG-MP | HTFM-50C11-248-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-04 | Holder Attached Surface Accuracy Guaranteed Mirror 248nm Optics Diameter 50.8mm HTFM-50.8C11-248-MHG-MP | HTFM-50.8C11-248-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-05 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 12.7mm HTFM-12.7C08-266-MHG-MP | HTFM-12.7C08-266-MHG-MP | 1piece | JPY: 53,400 | USD: 334.96 |
|
|
|
61-6948-06 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 25.4mm HTFM-25.4C08-266-MHG-MP | HTFM-25.4C08-266-MHG-MP | 1piece | JPY: 54,400 | USD: 341.24 |
|
|
|
61-6948-07 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 25.4mm HTFM-25.4C08-266-MHG-HS | HTFM-25.4C08-266-MHG-HS | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-08 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 30mm HTFM-30C08-266-MHG-MP | HTFM-30C08-266-MHG-MP | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-09 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 30mm HTFM-30C08-266-MHG-HS | HTFM-30C08-266-MHG-HS | 1piece | JPY: 58,400 | USD: 366.33 |
|
|
|
61-6948-10 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 50mm HTFM-50C11-266-MHG-MP | HTFM-50C11-266-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-11 | Holder Attached Surface Accuracy Guaranteed Mirror 266nm Optics Diameter 50.8mm HTFM-50.8C11-266-MHG-MP | HTFM-50.8C11-266-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-12 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 12.7mm HTFM-12.7C08-308-MHG-MP | HTFM-12.7C08-308-MHG-MP | 1piece | JPY: 53,400 | USD: 334.96 |
|
|
|
61-6948-13 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 25.4mm HTFM-25.4C08-308-MHG-MP | HTFM-25.4C08-308-MHG-MP | 1piece | JPY: 54,400 | USD: 341.24 |
|
|
|
61-6948-14 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 25.4mm HTFM-25.4C08-308-MHG-HS | HTFM-25.4C08-308-MHG-HS | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-15 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 30mm HTFM-30C08-308-MHG-MP | HTFM-30C08-308-MHG-MP | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-16 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 30mm HTFM-30C08-308-MHG-HS | HTFM-30C08-308-MHG-HS | 1piece | JPY: 58,400 | USD: 366.33 |
|
|
|
61-6948-17 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 50mm HTFM-50C11-308-MHG-MP | HTFM-50C11-308-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-18 | Holder Attached Surface Accuracy Guaranteed Mirror 308nm Optics Diameter 50.8mm HTFM-50.8C11-308-MHG-MP | HTFM-50.8C11-308-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-19 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 12.7mm HTFM-12.7C08-355-MHG-MP | HTFM-12.7C08-355-MHG-MP | 1piece | JPY: 53,400 | USD: 334.96 |
|
|
|
61-6948-20 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 25.4mm HTFM-25.4C08-355-MHG-MP | HTFM-25.4C08-355-MHG-MP | 1piece | JPY: 54,400 | USD: 341.24 |
|
|
|
61-6948-21 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 25.4mm HTFM-25.4C08-355-MHG-HS | HTFM-25.4C08-355-MHG-HS | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-22 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 30mm HTFM-30C08-355-MHG-MP | HTFM-30C08-355-MHG-MP | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-23 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 30mm HTFM-30C08-355-MHG-HS | HTFM-30C08-355-MHG-HS | 1piece | JPY: 58,400 | USD: 366.33 |
|
|
|
61-6948-24 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 50mm HTFM-50C11-355-MHG-MP | HTFM-50C11-355-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-25 | Holder Attached Surface Accuracy Guaranteed Mirror 355nm Optics Diameter 50.8mm HTFM-50.8C11-355-MHG-MP | HTFM-50.8C11-355-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-26 | Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 12.7mm HTFM-12.7C08-532-MHG-MP | HTFM-12.7C08-532-MHG-MP | 1piece | JPY: 33,600 | USD: 210.76 |
|
|
|
61-6948-27 | Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 25.4mm HTFM-25.4C08-532-MHG-MP | HTFM-25.4C08-532-MHG-MP | 1piece | JPY: 33,600 | USD: 210.76 |
|
|
|
61-6948-28 | Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 25.4mm HTFM-25.4C08-532-MHG-HS | HTFM-25.4C08-532-MHG-HS | 1piece | JPY: 35,600 | USD: 223.31 |
|
|
|
61-6948-29 | Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 30mm HTFM-30C08-532-MHG-MP | HTFM-30C08-532-MHG-MP | 1piece | JPY: 35,600 | USD: 223.31 |
|
|
|
61-6948-32 | Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 50.8mm HTFM-50.8C11-532-MHG-MP | HTFM-50.8C11-532-MHG-MP | 1piece | JPY: 69,300 | USD: 434.70 |
|
|
|
61-6948-33 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 12.7mm HTFM-12.7C08-1064-MHG-MP | HTFM-12.7C08-1064-MHG-MP | 1piece | JPY: 53,400 | USD: 334.96 |
|
|
|
61-6948-34 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 25.4mm HTFM-25.4C08-1064-MHG-MP | HTFM-25.4C08-1064-MHG-MP | 1piece | JPY: 54,400 | USD: 341.24 |
|
|
|
61-6948-35 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 25.4mm HTFM-25.4C08-1064-MHG-HS | HTFM-25.4C08-1064-MHG-HS | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-36 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 30mm HTFM-30C08-1064-MHG-MP | HTFM-30C08-1064-MHG-MP | 1piece | JPY: 56,400 | USD: 353.78 |
|
|
|
61-6948-37 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 30mm HTFM-30C08-1064-MHG-HS | HTFM-30C08-1064-MHG-HS | 1piece | JPY: 58,400 | USD: 366.33 |
|
|
|
61-6948-38 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 50mm HTFM-50C11-1064-MHG-MP | HTFM-50C11-1064-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-39 | Holder Attached Surface Accuracy Guaranteed Mirror 1064nm Optics Diameter 50.8mm HTFM-50.8C11-1064-MHG-MP | HTFM-50.8C11-1064-MHG-MP | 1piece | JPY: 85,100 | USD: 533.81 |
|
|
|
61-6948-30 | ［Discontinued］Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 30mm HTFM-50C11-532-MHG-MP | HTFM-50C11-532-MHG-MP | 1piece | JPY: 63,000 | USD: 395.18 |
-
|
|
|
61-6948-31 | ［Discontinued］Holder Attached Surface Accuracy Guaranteed Mirror 532nm Optics Diameter 50mm HTFM-30C08-532-MHG-HS | HTFM-30C08-532-MHG-HS | 1piece | JPY: 34,200 | USD: 214.53 |
-
|