61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
FeaturesFeatures class="init">
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
特徴
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
SpecSpec class="init">
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
特徴
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
Spec
- [
common specification]
- Material: BK7
- Mouth diameter side accuracy: λ/4
- Beam polarization angle: ＜5″
- Coating: CCB : No coat, CCB-M : Reflective prevention coat (400 - 700nm)
- Incident angle: ±20° (full reflective condition on critical angle)
- Scratch - dig: 40?20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Coating: Reflective prevention coat
- Outer diameter φD: φ30mm
- Height H: 22.7mm
- Laser durability *: 4 J/cm2
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
-
Order No.
61-6929-46
Model No.
CCB-30M
Standard price
JPY: 59,500
USD: 372.97
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
NameASONEs="init">
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
Features
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
Spec
- [
common specification]
- Material: BK7
- Mouth diameter side accuracy: λ/4
- Beam polarization angle: ＜5″
- Coating: CCB : No coat, CCB-M : Reflective prevention coat (400 - 700nm)
- Incident angle: ±20° (full reflective condition on critical angle)
- Scratch - dig: 40?20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Coating: Reflective prevention coat
- Outer diameter φD: φ30mm
- Height H: 22.7mm
- Laser durability *: 4 J/cm2
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
-
Order No.
61-6929-46
Model No.
CCB-30M
Standard price
JPY: 59,500
USD: 372.97
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6929-36
Corner Cube Prism φ10mm Height 8.6mm CCB-10
CCB-10
1piece
JPY: 60,600
USD: 379.87
61-6929-37
Corner Cube Prism φ15mm Height 11.4mm CCB-15
CCB-15
1piece
JPY: 53,200
USD: 333.48
61-6929-38
Corner Cube Prism φ20mm Height 15.6mm CCB-20
CCB-20
1piece
JPY: 54,300
USD: 340.38
61-6929-39
Corner Cube Prism φ25mm Height 19mm CCB-25
CCB-25
1piece
JPY: 55,300
USD: 346.64
61-6929-40
Corner Cube Prism φ30mm Height 22.7mm CCB-30
CCB-30
1piece
JPY: 57,400
USD: 359.81
61-6929-41
Corner Cube Prism φ50mm Height 36.5mm CCB-50
CCB-50
1piece
JPY: 81,500
USD: 510.88
61-6929-42
Corner Cube Prism φ10mm Height 8.6mm CCB-10M
CCB-10M
1piece
JPY: 62,700
USD: 393.03
61-6929-43
Corner Cube Prism φ15mm Height 11.4mm CCB-15M
CCB-15M
1piece
JPY: 55,300
USD: 346.64
61-6929-44
Corner Cube Prism φ20mm Height 15.6mm CCB-20M
CCB-20M
1piece
JPY: 56,400
USD: 353.54
61-6929-45
Corner Cube Prism φ25mm Height 19mm CCB-25M
CCB-25M
1piece
JPY: 57,400
USD: 359.81
61-6929-46
Corner Cube Prism φ30mm Height 22.7mm CCB-30M
CCB-30M
1piece
JPY: 59,500
USD: 372.97
61-6929-47
Corner Cube Prism φ50mm Height 36.5mm CCB-50M
CCB-50M
1piece
JPY: 86,700
USD: 543.47
Related Products
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
特徴
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
SpecSpec class="init">
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
特徴
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
Spec
- [
common specification]
- Material: BK7
- Mouth diameter side accuracy: λ/4
- Beam polarization angle: ＜5″
- Coating: CCB : No coat, CCB-M : Reflective prevention coat (400 - 700nm)
- Incident angle: ±20° (full reflective condition on critical angle)
- Scratch - dig: 40?20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Coating: Reflective prevention coat
- Outer diameter φD: φ30mm
- Height H: 22.7mm
- Laser durability *: 4 J/cm2
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
-
Order No.
61-6929-46
Model No.
CCB-30M
Standard price
JPY: 59,500
USD: 372.97
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
NameASONEs="init">
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
Features
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
Spec
- [
common specification]
- Material: BK7
- Mouth diameter side accuracy: λ/4
- Beam polarization angle: ＜5″
- Coating: CCB : No coat, CCB-M : Reflective prevention coat (400 - 700nm)
- Incident angle: ±20° (full reflective condition on critical angle)
- Scratch - dig: 40?20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Coating: Reflective prevention coat
- Outer diameter φD: φ30mm
- Height H: 22.7mm
- Laser durability *: 4 J/cm2
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
-
Order No.
61-6929-46
Model No.
CCB-30M
Standard price
JPY: 59,500
USD: 372.97
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6929-36
Corner Cube Prism φ10mm Height 8.6mm CCB-10
CCB-10
1piece
JPY: 60,600
USD: 379.87
61-6929-37
Corner Cube Prism φ15mm Height 11.4mm CCB-15
CCB-15
1piece
JPY: 53,200
USD: 333.48
61-6929-38
Corner Cube Prism φ20mm Height 15.6mm CCB-20
CCB-20
1piece
JPY: 54,300
USD: 340.38
61-6929-39
Corner Cube Prism φ25mm Height 19mm CCB-25
CCB-25
1piece
JPY: 55,300
USD: 346.64
61-6929-40
Corner Cube Prism φ30mm Height 22.7mm CCB-30
CCB-30
1piece
JPY: 57,400
USD: 359.81
61-6929-41
Corner Cube Prism φ50mm Height 36.5mm CCB-50
CCB-50
1piece
JPY: 81,500
USD: 510.88
61-6929-42
Corner Cube Prism φ10mm Height 8.6mm CCB-10M
CCB-10M
1piece
JPY: 62,700
USD: 393.03
61-6929-43
Corner Cube Prism φ15mm Height 11.4mm CCB-15M
CCB-15M
1piece
JPY: 55,300
USD: 346.64
61-6929-44
Corner Cube Prism φ20mm Height 15.6mm CCB-20M
CCB-20M
1piece
JPY: 56,400
USD: 353.54
61-6929-45
Corner Cube Prism φ25mm Height 19mm CCB-25M
CCB-25M
1piece
JPY: 57,400
USD: 359.81
61-6929-46
Corner Cube Prism φ30mm Height 22.7mm CCB-30M
CCB-30M
1piece
JPY: 59,500
USD: 372.97
61-6929-47
Corner Cube Prism φ50mm Height 36.5mm CCB-50M
CCB-50M
1piece
JPY: 86,700
USD: 543.47
Related Products
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30M
特徴
- It is a prism that can reflect all incoming light back to its original direction.
- It is used as a reflector in laser length measuring machines.
- The Corner Cube was developed to measure the distance between the Moon and Earth, and was placed on the lunar surface when the Apollo spacecraft landed on the Moon.
- Corner cubes are precisely machined so that they can return light with high accuracy.
- Even if the angle of the corner cube changes slightly during measurement, the angle of the returning light will not change, and the light will return to the detector of the measuring instrument.
- CCB-M type with anti-reflection film is also available to reduce the reflection loss of the incoming and outgoing surfaces.
- A Hollow Retro Reflector (RCCB) is also available that does not change the amount of reflection even at an incident angle of 20 degrees or more.
- * When a beam is incident on the corner cube, the beam is returned at exactly the same angle as the incident angle, but when the incident position of the beam is far from the center of the corner cube, the beam is emitted from the same distance away from the center.
- * The edges where the three reflecting surfaces of the corner cube intersect are chamfered, and if you look through the incoming and outgoing surfaces, you will see six lines that do not reflect light radially.
- * When using a thin laser beam, make sure that the beam is not applied to these six lines.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
- * When the corner cube is reflected by the total reflection surface, the phase difference occurs, and the polarization characteristic of the returned light changes greatly.
- * Hollow Retro Reflector (RCCB) is also available, which has a small change in polarization characteristics.
Spec
- [
common specification] - Material: BK7
- Mouth diameter side accuracy: λ/4
- Beam polarization angle: ＜5″
- Coating: CCB : No coat, CCB-M : Reflective prevention coat (400 - 700nm)
- Incident angle: ±20° (full reflective condition on critical angle)
- Scratch - dig: 40?20
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Coating: Reflective prevention coat
- Outer diameter φD: φ30mm
- Height H: 22.7mm
- Laser durability *: 4 J/cm2
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
| Order No. | 61-6929-46 | |
|---|---|---|
| Model No. | CCB-30M | |
| Standard price |
JPY: 59,500
USD: 372.97
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | NameASONEs="init">
61-6929-46 Corner Cube Prism φ30mm Height 22.7mm CCB-30MFeatures
Spec
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Related Products | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
