61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
Features
- This is an air-gap type acromatic condensing lens with no adhesive attached to the lens.
- It is used as a condensing lens for a 532 nm high-power laser machine with a built-in coaxial epi-illumination observation system.
- Chromatic aberration is corrected in a wide wavelength range centered around 532 nm by optimization based on lens design.
- For lenses with a focal length of 60 mm or more, laser collimation can be narrowed down to a spot diameter that is almost diffraction limited.
- Since the lens is coated with an anti-reflection film, the loss of light due to reflection is small, and the beam can be concentrated efficiently.
- A separately sold protective glass can be installed to protect the lens from flying light caused by laser processing.
- A special lens holder (LHF-M34-30) is available for fixing the condenser lens.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing so can cause chromatic aberration and spherical aberration to become large, which can increase the size of the focus spot, and can cause blurred images.
- If you use the instrument outside the specified wavelength range, chromatic aberration may increase and transmittance may be reduced.
- * When using with a high-power laser or near a light source that emits heat, the condenser lens may become hot and the focal length of the condenser lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
SpecSpec class="init">
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
特徴
- This is an air-gap type acromatic condensing lens with no adhesive attached to the lens.
- It is used as a condensing lens for a 532 nm high-power laser machine with a built-in coaxial epi-illumination observation system.
- Chromatic aberration is corrected in a wide wavelength range centered around 532 nm by optimization based on lens design.
- For lenses with a focal length of 60 mm or more, laser collimation can be narrowed down to a spot diameter that is almost diffraction limited.
- Since the lens is coated with an anti-reflection film, the loss of light due to reflection is small, and the beam can be concentrated efficiently.
- A separately sold protective glass can be installed to protect the lens from flying light caused by laser processing.
- A special lens holder (LHF-M34-30) is available for fixing the condenser lens.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing so can cause chromatic aberration and spherical aberration to become large, which can increase the size of the focus spot, and can cause blurred images.
- If you use the instrument outside the specified wavelength range, chromatic aberration may increase and transmittance may be reduced.
- * When using with a high-power laser or near a light source that emits heat, the condenser lens may become hot and the focal length of the condenser lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
SpecSpec class="init">
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
特徴
- This is an air-gap type acromatic condensing lens with no adhesive attached to the lens.
- It is used as a condensing lens for a 532 nm high-power laser machine with a built-in coaxial epi-illumination observation system.
- Chromatic aberration is corrected in a wide wavelength range centered around 532 nm by optimization based on lens design.
- For lenses with a focal length of 60 mm or more, laser collimation can be narrowed down to a spot diameter that is almost diffraction limited.
- Since the lens is coated with an anti-reflection film, the loss of light due to reflection is small, and the beam can be concentrated efficiently.
- A separately sold protective glass can be installed to protect the lens from flying light caused by laser processing.
- A special lens holder (LHF-M34-30) is available for fixing the condenser lens.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing so can cause chromatic aberration and spherical aberration to become large, which can increase the size of the focus spot, and can cause blurred images.
- If you use the instrument outside the specified wavelength range, chromatic aberration may increase and transmittance may be reduced.
- * When using with a high-power laser or near a light source that emits heat, the condenser lens may become hot and the focal length of the condenser lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
仕様
- [
common specification]
- Material: Crown series glass - (air gap) - flint series glass
- Frame material: Aluminum surface treatment: Black anodic oxide
- Design wavelength: 1064nm, 632.8nm
- Coating: 1064nm, for 632.8nm reflective prevention film
- Incident allowable angle: ±1°
- Laser durability: 1J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- [Individual specification]
- Lens outer diameter φD: φ30mm
- Focus distance f: 30mm
- Outer diameter φDc: φ36mm
- Effective diameter φDe: φ27mm
- Length L: 22mm
- Screw for fixing Ma: M34 P0.75
- Mounting screw Mb: M28 P0.75
- Screw length A: 6.5mm
- NA : 0.45
- WD: 19.1mm
- RoHS conform product
-
Order No.
61-6927-66
Model No.
NYTL-30-30PY1
Standard price
JPY: 104,500
USD: 655.50
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6927-65
YAGLaser Focusing Lens Focal Length 20mm NYTL-25-20PY1
NYTL-25-20PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-66
YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
NYTL-30-30PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-67
YAGLaser Focusing Lens Focal Length 40mm NYTL-30-40PY1
NYTL-30-40PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-68
YAGLaser Focusing Lens Focal Length 50mm NYTL-30-50PY1
NYTL-30-50PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-69
YAGLaser Focusing Lens Focal Length 59.9mm NYDL-30-60PY1
NYDL-30-60PY1
1piece
JPY: 88,000
USD: 552.00
61-6927-70
YAGLaser Focusing Lens Focal Length 79.9mm NYDL-30-80PY1
NYDL-30-80PY1
1piece
JPY: 88,000
USD: 552.00
61-6927-71
YAGLaser Focusing Lens Focal Length 100.1mm NYDL-30-100PY1
NYDL-30-100PY1
1piece
JPY: 88,000
USD: 552.00
61-6927-72
YAGLaser Focusing Lens Focal Length 149.3mm NYDL-30-150PY1
NYDL-30-150PY1
1piece
JPY: 88,000
USD: 552.00
Related Products
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
特徴
- This is an air-gap type acromatic condensing lens with no adhesive attached to the lens.
- It is used as a condensing lens for a 532 nm high-power laser machine with a built-in coaxial epi-illumination observation system.
- Chromatic aberration is corrected in a wide wavelength range centered around 532 nm by optimization based on lens design.
- For lenses with a focal length of 60 mm or more, laser collimation can be narrowed down to a spot diameter that is almost diffraction limited.
- Since the lens is coated with an anti-reflection film, the loss of light due to reflection is small, and the beam can be concentrated efficiently.
- A separately sold protective glass can be installed to protect the lens from flying light caused by laser processing.
- A special lens holder (LHF-M34-30) is available for fixing the condenser lens.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing so can cause chromatic aberration and spherical aberration to become large, which can increase the size of the focus spot, and can cause blurred images.
- If you use the instrument outside the specified wavelength range, chromatic aberration may increase and transmittance may be reduced.
- * When using with a high-power laser or near a light source that emits heat, the condenser lens may become hot and the focal length of the condenser lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
SpecSpec class="init">
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
特徴
- This is an air-gap type acromatic condensing lens with no adhesive attached to the lens.
- It is used as a condensing lens for a 532 nm high-power laser machine with a built-in coaxial epi-illumination observation system.
- Chromatic aberration is corrected in a wide wavelength range centered around 532 nm by optimization based on lens design.
- For lenses with a focal length of 60 mm or more, laser collimation can be narrowed down to a spot diameter that is almost diffraction limited.
- Since the lens is coated with an anti-reflection film, the loss of light due to reflection is small, and the beam can be concentrated efficiently.
- A separately sold protective glass can be installed to protect the lens from flying light caused by laser processing.
- A special lens holder (LHF-M34-30) is available for fixing the condenser lens.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing so can cause chromatic aberration and spherical aberration to become large, which can increase the size of the focus spot, and can cause blurred images.
- If you use the instrument outside the specified wavelength range, chromatic aberration may increase and transmittance may be reduced.
- * When using with a high-power laser or near a light source that emits heat, the condenser lens may become hot and the focal length of the condenser lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
仕様
- [
common specification]
- Material: Crown series glass - (air gap) - flint series glass
- Frame material: Aluminum surface treatment: Black anodic oxide
- Design wavelength: 1064nm, 632.8nm
- Coating: 1064nm, for 632.8nm reflective prevention film
- Incident allowable angle: ±1°
- Laser durability: 1J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- [Individual specification]
- Lens outer diameter φD: φ30mm
- Focus distance f: 30mm
- Outer diameter φDc: φ36mm
- Effective diameter φDe: φ27mm
- Length L: 22mm
- Screw for fixing Ma: M34 P0.75
- Mounting screw Mb: M28 P0.75
- Screw length A: 6.5mm
- NA : 0.45
- WD: 19.1mm
- RoHS conform product
-
Order No.
61-6927-66
Model No.
NYTL-30-30PY1
Standard price
JPY: 104,500
USD: 655.50
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6927-65
YAGLaser Focusing Lens Focal Length 20mm NYTL-25-20PY1
NYTL-25-20PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-66
YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
NYTL-30-30PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-67
YAGLaser Focusing Lens Focal Length 40mm NYTL-30-40PY1
NYTL-30-40PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-68
YAGLaser Focusing Lens Focal Length 50mm NYTL-30-50PY1
NYTL-30-50PY1
1piece
JPY: 104,500
USD: 655.50
61-6927-69
YAGLaser Focusing Lens Focal Length 59.9mm NYDL-30-60PY1
NYDL-30-60PY1
1piece
JPY: 88,000
USD: 552.00
61-6927-70
YAGLaser Focusing Lens Focal Length 79.9mm NYDL-30-80PY1
NYDL-30-80PY1
1piece
JPY: 88,000
USD: 552.00
61-6927-71
YAGLaser Focusing Lens Focal Length 100.1mm NYDL-30-100PY1
NYDL-30-100PY1
1piece
JPY: 88,000
USD: 552.00
61-6927-72
YAGLaser Focusing Lens Focal Length 149.3mm NYDL-30-150PY1
NYDL-30-150PY1
1piece
JPY: 88,000
USD: 552.00
Related Products
61-6927-66 YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1
特徴
- This is an air-gap type acromatic condensing lens with no adhesive attached to the lens.
- It is used as a condensing lens for a 532 nm high-power laser machine with a built-in coaxial epi-illumination observation system.
- Chromatic aberration is corrected in a wide wavelength range centered around 532 nm by optimization based on lens design.
- For lenses with a focal length of 60 mm or more, laser collimation can be narrowed down to a spot diameter that is almost diffraction limited.
- Since the lens is coated with an anti-reflection film, the loss of light due to reflection is small, and the beam can be concentrated efficiently.
- A separately sold protective glass can be installed to protect the lens from flying light caused by laser processing.
- A special lens holder (LHF-M34-30) is available for fixing the condenser lens.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing so can cause chromatic aberration and spherical aberration to become large, which can increase the size of the focus spot, and can cause blurred images.
- If you use the instrument outside the specified wavelength range, chromatic aberration may increase and transmittance may be reduced.
- * When using with a high-power laser or near a light source that emits heat, the condenser lens may become hot and the focal length of the condenser lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
仕様
- [
common specification] - Material: Crown series glass - (air gap) - flint series glass
- Frame material: Aluminum surface treatment: Black anodic oxide
- Design wavelength: 1064nm, 632.8nm
- Coating: 1064nm, for 632.8nm reflective prevention film
- Incident allowable angle: ±1°
- Laser durability: 1J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- [Individual specification]
- Lens outer diameter φD: φ30mm
- Focus distance f: 30mm
- Outer diameter φDc: φ36mm
- Effective diameter φDe: φ27mm
- Length L: 22mm
- Screw for fixing Ma: M34 P0.75
- Mounting screw Mb: M28 P0.75
- Screw length A: 6.5mm
- NA : 0.45
- WD: 19.1mm
- RoHS conform product
| Order No. | 61-6927-66 | |
|---|---|---|
| Model No. | NYTL-30-30PY1 | |
| Standard price |
JPY: 104,500
USD: 655.50
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6927-65 | YAGLaser Focusing Lens Focal Length 20mm NYTL-25-20PY1 | NYTL-25-20PY1 | 1piece | JPY: 104,500 | USD: 655.50 |
|
|
|
61-6927-66 | YAGLaser Focusing Lens Focal Length 30mm NYTL-30-30PY1 | NYTL-30-30PY1 | 1piece | JPY: 104,500 | USD: 655.50 |
|
|
|
61-6927-67 | YAGLaser Focusing Lens Focal Length 40mm NYTL-30-40PY1 | NYTL-30-40PY1 | 1piece | JPY: 104,500 | USD: 655.50 |
|
|
|
61-6927-68 | YAGLaser Focusing Lens Focal Length 50mm NYTL-30-50PY1 | NYTL-30-50PY1 | 1piece | JPY: 104,500 | USD: 655.50 |
|
|
|
61-6927-69 | YAGLaser Focusing Lens Focal Length 59.9mm NYDL-30-60PY1 | NYDL-30-60PY1 | 1piece | JPY: 88,000 | USD: 552.00 |
|
|
|
61-6927-70 | YAGLaser Focusing Lens Focal Length 79.9mm NYDL-30-80PY1 | NYDL-30-80PY1 | 1piece | JPY: 88,000 | USD: 552.00 |
|
|
|
61-6927-71 | YAGLaser Focusing Lens Focal Length 100.1mm NYDL-30-100PY1 | NYDL-30-100PY1 | 1piece | JPY: 88,000 | USD: 552.00 |
|
|
|
61-6927-72 | YAGLaser Focusing Lens Focal Length 149.3mm NYDL-30-150PY1 | NYDL-30-150PY1 | 1piece | JPY: 88,000 | USD: 552.00 |
|
