61-6927-55 Excimer Laser Focusing Lens Focal Length 199.1mm EDL-50-200P
FeaturesFeatures class="init">
61-6927-55 Excimer Laser Focusing Lens Focal Length 199.1mm EDL-50-200P 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6927-55 Excimer Laser Focusing Lens Focal Length 199.1mm EDL-50-200P
特徴
- It is a condensing lens for ultraviolet lasers composed of a synthetic quartz lens with high transmittance in the ultraviolet region.
- No glass or adhesive absorbs ultraviolet light, so it has excellent light resistance.
- Two or three spherical lenses are combined to correct for spherical and coma aberration.
- It can also be used as a condenser lens for Kr* F excimer laser (248 nm), 4 times wave (266 nm) and 3 times wave (355 nm) of YAG laser.
- With a lens of NA0.1 or less, the laser collimated light can be narrowed down to a spot diameter that is almost diffraction limited.
- (NA 0.25 or less for ETL)
- Protective glass, sold separately, can be installed to protect the lens from flying light caused by laser processing.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing the reverse operation will cause the spherical aberration to increase, which can cause the focus spot to increase and can cause blurred images.
- Aberration and transmittance will be reduced if the camera is used outside the specified wavelength range.
- * When using with a high power laser or near a high heat source, the focusing lens may become hot and the focal length of the focusing lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
- * This condenser lens is not an achromatic lens.
- Chromatic aberration is not corrected.
- Surface reflection (4%) of the lens causes a transmission loss of about 20%.
Spec
- [
common specification]
- Material: Synthetic quartz for excimer laser (air gap)
- Design wavelength: 248nm
- Coating: No coat
- Incident allowable angle: ±1°
- [Individual specification]
- Focus distance f: 199.1mm
- Length L: 20mm
- NA : 0.12
- WD: 187.9mm
- RoHS conform product
-
Order No.
61-6927-55
Model No.
EDL-50-200P
Standard price
JPY: 128,700
USD: 806.75
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6927-46
Excimer Laser Focusing Lens Focal Length 39.6mm ETL-30-40P
ETL-30-40P
1piece
JPY: 121,000
USD: 758.48
61-6927-47
Excimer Laser Focusing Lens Focal Length 49.8mm ETL-30-50P
ETL-30-50P
1piece
JPY: 121,000
USD: 758.48
61-6927-48
Excimer Laser Focusing Lens Focal Length 59.7mm ETL-30-60P
ETL-30-60P
1piece
JPY: 121,000
USD: 758.48
61-6927-49
Excimer Laser Focusing Lens Focal Length 79.8mm ETL-30-80P
ETL-30-80P
1piece
JPY: 121,000
USD: 758.48
61-6927-50
Excimer Laser Focusing Lens Focal Length 99.9mm NEDL-30-100P
NEDL-30-100P
1piece
JPY: 75,900
USD: 475.77
61-6927-51
Excimer Laser Focusing Lens Focal Length 149.3mm NEDL-30-150P
NEDL-30-150P
1piece
JPY: 70,400
USD: 441.30
61-6927-52
Excimer Laser Focusing Lens Focal Length 199.3mm NEDL-30-200P
NEDL-30-200P
1piece
JPY: 66,000
USD: 413.72
61-6927-53
Excimer Laser Focusing Lens Focal Length 100.4mm EDL-50-100P
EDL-50-100P
1piece
JPY: 140,800
USD: 882.59
61-6927-54
Excimer Laser Focusing Lens Focal Length 149.6mm EDL-50-150P
EDL-50-150P
1piece
JPY: 135,300
USD: 848.12
61-6927-55
Excimer Laser Focusing Lens Focal Length 199.1mm EDL-50-200P
EDL-50-200P
1piece
JPY: 128,700
USD: 806.75
61-6927-56
Excimer Laser Focusing Lens Focal Length 249mm EDL-50-250P
EDL-50-250P
1piece
JPY: 122,100
USD: 765.37
61-6927-57
Excimer Laser Focusing Lens Focal Length 298.6mm EDL-50-300P
EDL-50-300P
1piece
JPY: 115,500
USD: 724.00
61-6927-55 Excimer Laser Focusing Lens Focal Length 199.1mm EDL-50-200P
特徴
- It is a condensing lens for ultraviolet lasers composed of a synthetic quartz lens with high transmittance in the ultraviolet region.
- No glass or adhesive absorbs ultraviolet light, so it has excellent light resistance.
- Two or three spherical lenses are combined to correct for spherical and coma aberration.
- It can also be used as a condenser lens for Kr* F excimer laser (248 nm), 4 times wave (266 nm) and 3 times wave (355 nm) of YAG laser.
- With a lens of NA0.1 or less, the laser collimated light can be narrowed down to a spot diameter that is almost diffraction limited.
- (NA 0.25 or less for ETL)
- Protective glass, sold separately, can be installed to protect the lens from flying light caused by laser processing.
- * Use the condenser lens when you want to focus an object at infinity, or when you want to use the point light source as parallel light.
- Sufficient optical performance cannot be obtained when the camera is used for close-range imaging.
- * The condenser lens has an orientation that allows light to enter.
- * Be sure to allow parallel light to enter from the upper side (look at the engraving on the side of the lens barrel upright).
- * Doing the reverse operation will cause the spherical aberration to increase, which can cause the focus spot to increase and can cause blurred images.
- Aberration and transmittance will be reduced if the camera is used outside the specified wavelength range.
- * When using with a high power laser or near a high heat source, the focusing lens may become hot and the focal length of the focusing lens may change.
- * Heat dissipation measures are necessary when irradiating for a long time.
- * If you want to reduce the condensing spot diameter, widen the incident beam diameter (1/e^2) to about half the effective diameter of the condensing lens.
- * This condenser lens is not an achromatic lens.
- Chromatic aberration is not corrected.
- Surface reflection (4%) of the lens causes a transmission loss of about 20%.
Spec
- [
common specification] - Material: Synthetic quartz for excimer laser (air gap)
- Design wavelength: 248nm
- Coating: No coat
- Incident allowable angle: ±1°
- [Individual specification]
- Focus distance f: 199.1mm
- Length L: 20mm
- NA : 0.12
- WD: 187.9mm
- RoHS conform product
| Order No. | 61-6927-55 | |
|---|---|---|
| Model No. | EDL-50-200P | |
| Standard price |
JPY: 128,700
USD: 806.75
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6927-46 | Excimer Laser Focusing Lens Focal Length 39.6mm ETL-30-40P | ETL-30-40P | 1piece | JPY: 121,000 | USD: 758.48 |
|
|
|
61-6927-47 | Excimer Laser Focusing Lens Focal Length 49.8mm ETL-30-50P | ETL-30-50P | 1piece | JPY: 121,000 | USD: 758.48 |
|
|
|
61-6927-48 | Excimer Laser Focusing Lens Focal Length 59.7mm ETL-30-60P | ETL-30-60P | 1piece | JPY: 121,000 | USD: 758.48 |
|
|
|
61-6927-49 | Excimer Laser Focusing Lens Focal Length 79.8mm ETL-30-80P | ETL-30-80P | 1piece | JPY: 121,000 | USD: 758.48 |
|
|
|
61-6927-50 | Excimer Laser Focusing Lens Focal Length 99.9mm NEDL-30-100P | NEDL-30-100P | 1piece | JPY: 75,900 | USD: 475.77 |
|
|
|
61-6927-51 | Excimer Laser Focusing Lens Focal Length 149.3mm NEDL-30-150P | NEDL-30-150P | 1piece | JPY: 70,400 | USD: 441.30 |
|
|
|
61-6927-52 | Excimer Laser Focusing Lens Focal Length 199.3mm NEDL-30-200P | NEDL-30-200P | 1piece | JPY: 66,000 | USD: 413.72 |
|
|
|
61-6927-53 | Excimer Laser Focusing Lens Focal Length 100.4mm EDL-50-100P | EDL-50-100P | 1piece | JPY: 140,800 | USD: 882.59 |
|
|
|
61-6927-54 | Excimer Laser Focusing Lens Focal Length 149.6mm EDL-50-150P | EDL-50-150P | 1piece | JPY: 135,300 | USD: 848.12 |
|
|
|
61-6927-55 | Excimer Laser Focusing Lens Focal Length 199.1mm EDL-50-200P | EDL-50-200P | 1piece | JPY: 128,700 | USD: 806.75 |
|
|
|
61-6927-56 | Excimer Laser Focusing Lens Focal Length 249mm EDL-50-250P | EDL-50-250P | 1piece | JPY: 122,100 | USD: 765.37 |
|
|
|
61-6927-57 | Excimer Laser Focusing Lens Focal Length 298.6mm EDL-50-300P | EDL-50-300P | 1piece | JPY: 115,500 | USD: 724.00 |
|