61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880
FeaturesFeatures class="init">
61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880 【AXEL GLOBAL】 アズワン
Contact us
SIGMAKOKI CO., LTD.
61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880
特徴
- This half mirror provides an accurate 1:1 divergence ratio between reflection and transmission even for laser and linearly polarized light sources.
- Dielectric multilayer film and transparent adhesive are used for the reflecting surface, and anti-reflection coat is used for the incoming and outgoing surfaces, so light loss is small and incident light can be used efficiently.
- The reflection to transmission branching ratio (1:1) does not change when the polarization orientation of linearly polarized light changes.
- We have a lineup that supports lasers of various wavelengths.
- Since it is a cube type, the optical axis of the emitted light will not be translated if the beam is incident vertically.
- Also, even if a beam of the same size as the effective diameter is injected, the transmitted or reflected light will not be lost or reduced.
- * Enter light from the prism side indicated by ○.
- * Reflectivity, branching ratio, and polarization characteristics may change when the other prism is used.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
- * Use a wave plate to compensate for the phase difference.
- * Wavelength dispersion occurs in transmitted and reflected light due to the refractive index of the material and the thickness of the glass.
- * In addition, chromatic aberration and spherical aberration may occur when a converging or diverging beam is injected.
Spec
- [
common specification]
- Material: BK7 synthetic quartz
- Base material surface accuracy: λ/4
- Transmitted beam polarization angle: <5′
- Coating: Slope dielectric multi-layered film, Side 4 surfaces reflective prevention film
- Incident angle: 0°
- Branching ratio (reflection: Transmission): 1: 1
- Laser durability: 0.3J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- Scratch - dig: 20-10
- Effective range: Circle inscribed to 85% of outer dimensions of square (A=B=C ≦ 7mm: Circle inscribed to 80% of outer dimensions of square)
- [Individual specification]
- Adaptive wavelength: 488nm
- A=B=C: 20mm
- Material: BK7
- Transmittance: 50±5%
- RoHS conform product
-
Order No.Order No.ss="init">
61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880 【AXEL GLOBAL】 アズワン
Contact us
SIGMAKOKI CO., LTD.
61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880
特徴
- This half mirror provides an accurate 1:1 divergence ratio between reflection and transmission even for laser and linearly polarized light sources.
- Dielectric multilayer film and transparent adhesive are used for the reflecting surface, and anti-reflection coat is used for the incoming and outgoing surfaces, so light loss is small and incident light can be used efficiently.
- The reflection to transmission branching ratio (1:1) does not change when the polarization orientation of linearly polarized light changes.
- We have a lineup that supports lasers of various wavelengths.
- Since it is a cube type, the optical axis of the emitted light will not be translated if the beam is incident vertically.
- Also, even if a beam of the same size as the effective diameter is injected, the transmitted or reflected light will not be lost or reduced.
- * Enter light from the prism side indicated by ○.
- * Reflectivity, branching ratio, and polarization characteristics may change when the other prism is used.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
- * Use a wave plate to compensate for the phase difference.
- * Wavelength dispersion occurs in transmitted and reflected light due to the refractive index of the material and the thickness of the glass.
- * In addition, chromatic aberration and spherical aberration may occur when a converging or diverging beam is injected.
仕様
- [
common specification]
- Material: BK7 synthetic quartz
- Base material surface accuracy: λ/4
- Transmitted beam polarization angle: <5′
- Coating: Slope dielectric multi-layered film, Side 4 surfaces reflective prevention film
- Incident angle: 0°
- Branching ratio (reflection: Transmission): 1: 1
- Laser durability: 0.3J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- Scratch - dig: 20-10
- Effective range: Circle inscribed to 85% of outer dimensions of square (A=B=C ≦ 7mm: Circle inscribed to 80% of outer dimensions of square)
- [Individual specification]
- Adaptive wavelength: 488nm
- A=B=C: 20mm
- Material: BK7
- Transmittance: 50±5%
- RoHS conform product
-
アズワン品番
61-6876-77
型番
NPCH-20-4880
標準価格
JPY: 41,800
USD: 262.02
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション (サイズ違い・スペック違い・オプション品など)
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]

61-6876-66
Non-Polarizing Cube Half Mirror 266nm A = B = C: 10mm NPCH-10-2660
NPCH-10-2660
1piece
JPY: 52,200
USD: 327.21


61-6876-67
Non-Polarizing Cube Half Mirror 266nm A = B = C: 15mm NPCH-15-2660
NPCH-15-2660
1piece
JPY: 57,400
USD: 359.81


61-6876-68
Non-Polarizing Cube Half Mirror 266nm A = B = C: 20mm NPCH-20-2660
NPCH-20-2660
1piece
JPY: 62,700
USD: 393.03


61-6876-69
Non-Polarizing Cube Half Mirror 355nm A = B = C: 10mm NPCH-10-3550
NPCH-10-3550
1piece
JPY: 52,200
USD: 327.21


61-6876-70
Non-Polarizing Cube Half Mirror 355nm A = B = C: 15mm NPCH-15-3550
NPCH-15-3550
1piece
JPY: 57,400
USD: 359.81


61-6876-71
Non-Polarizing Cube Half Mirror 355nm A = B = C: 20mm NPCH-20-3550
NPCH-20-3550
1piece
JPY: 62,700
USD: 393.03


61-6876-72
Non-Polarizing Cube Half Mirror 405nm A = B = C: 10mm NPCH-10-4050
NPCH-10-4050
1piece
JPY: 31,300
USD: 196.20


61-6876-73
Non-Polarizing Cube Half Mirror 405nm A = B = C: 15mm NPCH-15-4050
NPCH-15-4050
1piece
JPY: 36,500
USD: 228.80


61-6876-74
Non-Polarizing Cube Half Mirror 405nm A = B = C: 20mm NPCH-20-4050
NPCH-20-4050
1piece
JPY: 41,800
USD: 262.02


61-6876-75
Non-Polarizing Cube Half Mirror 488nm A = B = C: 10mm NPCH-10-4880
NPCH-10-4880
1piece
JPY: 31,300
USD: 196.20


61-6876-76
Non-Polarizing Cube Half Mirror 488nm A = B = C: 15mm NPCH-15-4880
NPCH-15-4880
1piece
JPY: 36,500
USD: 228.80


61-6876-77
Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880
NPCH-20-4880
1piece
JPY: 41,800
USD: 262.02


61-6876-78
Non-Polarizing Cube Half Mirror 514. 5nm A = B = C: 10mm NPCH-10-5145
NPCH-10-5145
1piece
JPY: 31,300
USD: 196.20


61-6876-79
Non-Polarizing Cube Half Mirror 514. 5nm A = B = C: 15mm NPCH-15-5145
NPCH-15-5145
1piece
JPY: 36,500
USD: 228.80


61-6876-80
Non-Polarizing Cube Half Mirror 514. 5nm A = B = C: 20mm NPCH-20-5145
NPCH-20-5145
1piece
JPY: 41,800
USD: 262.02


61-6876-81
Non-Polarizing Cube Half Mirror 532nm A = B = C: 10mm NPCH-10-5320
NPCH-10-5320
1piece
JPY: 31,300
USD: 196.20


61-6876-82
Non-Polarizing Cube Half Mirror 532nm A = B = C: 15mm NPCH-15-5320
NPCH-15-5320
1piece
JPY: 36,500
USD: 228.80


61-6876-83
Non-Polarizing Cube Half Mirror 532nm A = B = C: 20mm NPCH-20-5320
NPCH-20-5320
1piece
JPY: 41,800
USD: 262.02


61-6876-84
Non-Polarizing Cube Half Mirror 638nm A = B = C: 5mm NPCH-05-6328
NPCH-05-6328
1piece
JPY: 31,300
USD: 196.20


61-6876-85
Non-Polarizing Cube Half Mirror 632. 8nm A = B = C: 10mm NPCH-10-6328
NPCH-10-6328
1piece
JPY: 31,300
USD: 196.20


61-6876-86
Non-Polarizing Cube Half Mirror 632. 8nm A = B = C: 15mm NPCH-15-6328
NPCH-15-6328
1piece
JPY: 36,500
USD: 228.80


61-6876-87
Non-Polarizing Cube Half Mirror 632. 8nm A = B = C: 20mm NPCH-20-6328
NPCH-20-6328
1piece
JPY: 41,800
USD: 262.02


61-6876-88
Non-Polarizing Cube Half Mirror 670nm A = B = C: 10mm NPCH-10-6700
NPCH-10-6700
1piece
JPY: 31,300
USD: 196.20


61-6876-89
Non-Polarizing Cube Half Mirror 670nm A = B = C: 15mm NPCH-15-6700
NPCH-15-6700
1piece
JPY: 36,500
USD: 228.80


61-6876-90
Non-Polarizing Cube Half Mirror 670nm A = B = C: 20mm NPCH-20-6700
NPCH-20-6700
1piece
JPY: 41,800
USD: 262.02


61-6876-91
Non-Polarizing Cube Half Mirror 780nm A = B = C: 10mm NPCH-10-7800
NPCH-10-7800
1piece
JPY: 31,300
USD: 196.20


61-6876-92
Non-Polarizing Cube Half Mirror 780nm A = B = C: 15mm NPCH-15-7800
NPCH-15-7800
1piece
JPY: 36,500
USD: 228.80


61-6876-93
Non-Polarizing Cube Half Mirror 780nm A = B = C: 20mm NPCH-20-7800
NPCH-20-7800
1piece
JPY: 41,800
USD: 262.02


61-6876-94
Non-Polarizing Cube Half Mirror 830nm A = B = C: 10mm NPCH-10-8300
NPCH-10-8300
1piece
JPY: 31,300
USD: 196.20


61-6876-95
Non-Polarizing Cube Half Mirror 830nm A = B = C: 15mm NPCH-15-8300
NPCH-15-8300
1piece
JPY: 36,500
USD: 228.80


61-6876-96
Non-Polarizing Cube Half Mirror 830nm A = B = C: 20mm NPCH-20-8300
NPCH-20-8300
1piece
JPY: 41,800
USD: 262.02


61-6876-97
Non-Polarizing Cube Half Mirror 1064nm A = B = C: 10mm NPCH-10-10640
NPCH-10-10640
1piece
JPY: 31,300
USD: 196.20


61-6876-98
Non-Polarizing Cube Half Mirror 1064nm A = B = C: 15mm NPCH-15-10640
NPCH-15-10640
1piece
JPY: 36,500
USD: 228.80


61-6876-99
Non-Polarizing Cube Half Mirror 1064nm A = B = C: 20mm NPCH-20-10640
NPCH-20-10640
1piece
JPY: 41,800
USD: 262.02


61-6877-01
Non-Polarizing Cube Half Mirror 1300nm A = B = C: 10mm NPCH-10-13000
NPCH-10-13000
1piece
JPY: 31,300
USD: 196.20


61-6877-02
Non-Polarizing Cube Half Mirror 1300nm A = B = C: 15mm NPCH-15-13000
NPCH-15-13000
1piece
JPY: 36,500
USD: 228.80


61-6877-03
Non-Polarizing Cube Half Mirror 1300nm A = B = C: 20mm NPCH-20-13000
NPCH-20-13000
1piece
JPY: 41,800
USD: 262.02


61-6877-04
Non-Polarizing Cube Half Mirror 1550nm A = B = C: 10mm NPCH-10-15500
NPCH-10-15500
1piece
JPY: 31,300
USD: 196.20


61-6877-05
Non-Polarizing Cube Half Mirror 1550nm A = B = C: 15mm NPCH-15-15500
NPCH-15-15500
1piece
JPY: 36,500
USD: 228.80


61-6877-06
Non-Polarizing Cube Half Mirror 1550nm A = B = C: 20mm NPCH-20-15500
NPCH-20-15500
1piece
JPY: 41,800
USD: 262.02

61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880
特徴
- This half mirror provides an accurate 1:1 divergence ratio between reflection and transmission even for laser and linearly polarized light sources.
- Dielectric multilayer film and transparent adhesive are used for the reflecting surface, and anti-reflection coat is used for the incoming and outgoing surfaces, so light loss is small and incident light can be used efficiently.
- The reflection to transmission branching ratio (1:1) does not change when the polarization orientation of linearly polarized light changes.
- We have a lineup that supports lasers of various wavelengths.
- Since it is a cube type, the optical axis of the emitted light will not be translated if the beam is incident vertically.
- Also, even if a beam of the same size as the effective diameter is injected, the transmitted or reflected light will not be lost or reduced.
- * Enter light from the prism side indicated by ○.
- * Reflectivity, branching ratio, and polarization characteristics may change when the other prism is used.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
- * Use a wave plate to compensate for the phase difference.
- * Wavelength dispersion occurs in transmitted and reflected light due to the refractive index of the material and the thickness of the glass.
- * In addition, chromatic aberration and spherical aberration may occur when a converging or diverging beam is injected.
Spec
- [
common specification] - Material: BK7 synthetic quartz
- Base material surface accuracy: λ/4
- Transmitted beam polarization angle: <5′
- Coating: Slope dielectric multi-layered film, Side 4 surfaces reflective prevention film
- Incident angle: 0°
- Branching ratio (reflection: Transmission): 1: 1
- Laser durability: 0.3J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- Scratch - dig: 20-10
- Effective range: Circle inscribed to 85% of outer dimensions of square (A=B=C ≦ 7mm: Circle inscribed to 80% of outer dimensions of square)
- [Individual specification]
- Adaptive wavelength: 488nm
- A=B=C: 20mm
- Material: BK7
- Transmittance: 50±5%
- RoHS conform product
Order No.Order No.ss="init">
61-6876-77 Non-Polarizing Cube Half Mirror 488nm A = B = C: 20mm NPCH-20-4880特徴
仕様
商品のバリエーション (サイズ違い・スペック違い・オプション品など)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|



