61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
FeaturesFeatures class="init">
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIIGATA SEIKI CO., LTD.
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
特徴
- You can inspect a threaded part at its predetermined upper and lower dimensional accuracy limits.
- It is a necessity to check screw accuracy! Screw accuracy can be checked easily at the side of the street side stop.
Spec
- screw Ring Set 2 Grade
- For Inspection: GPIP * Handicraft (GPWP, GRWR) is also available. *Please inquire about the ISO method.
- material : Alloy tool carbon steel
- Nominal Dimensions: M20 x P 2.5/outer diameter (mm): 50/T1 (mm): 22/T2 (mm): 15
- inspection in screw
- The limit thread gauge is determined to be the same gauge of screw grade as grade to be measured.
- This screw gauge is a measurement gauge that is tested by with two Dimensions differences, street and stop, at the upper and lower limits of threaded fastner's predetermined Dimensions accuracy.
- A gage is judged acceptable if it passes the limit thread gauge without difficulty and the stop gage does not screw in more than two rotations.
- Body Total length: 50 mm
-
Package sizePackage sizes="init">
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIIGATA SEIKI CO., LTD.
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
特徴
- You can inspect a threaded part at its predetermined upper and lower dimensional accuracy limits.
- It is a necessity to check screw accuracy! Screw accuracy can be checked easily at the side of the street side stop.
仕様
- screw Ring Set 2 Grade
- For Inspection: GPIP * Handicraft (GPWP, GRWR) is also available. *Please inquire about the ISO method.
- material : Alloy tool carbon steel
- Nominal Dimensions: M20 x P 2.5/outer diameter (mm): 50/T1 (mm): 22/T2 (mm): 15
- inspection in screw
- The limit thread gauge is determined to be the same gauge of screw grade as grade to be measured.
- This screw gauge is a measurement gauge that is tested by with two Dimensions differences, street and stop, at the upper and lower limits of threaded fastner's predetermined Dimensions accuracy.
- A gage is judged acceptable if it passes the limit thread gauge without difficulty and the stop gage does not screw in more than two rotations.
- Body Total length: 50 mm
-
Package sizeASONEs="init">
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIIGATA SEIKI CO., LTD.
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
Features
- You can inspect a threaded part at its predetermined upper and lower dimensional accuracy limits.
- It is a necessity to check screw accuracy! Screw accuracy can be checked easily at the side of the street side stop.
Spec
- screw Ring Set 2 Grade
- For Inspection: GPIP * Handicraft (GPWP, GRWR) is also available. *Please inquire about the ISO method.
- material : Alloy tool carbon steel
- Nominal Dimensions: M20 x P 2.5/outer diameter (mm): 50/T1 (mm): 22/T2 (mm): 15
- inspection in screw
- The limit thread gauge is determined to be the same gauge of screw grade as grade to be measured.
- This screw gauge is a measurement gauge that is tested by with two Dimensions differences, street and stop, at the upper and lower limits of threaded fastner's predetermined Dimensions accuracy.
- A gage is judged acceptable if it passes the limit thread gauge without difficulty and the stop gage does not screw in more than two rotations.
- Body Total length: 50 mm
-
Package size：111×45×117 mm 580 g
[About Package size]
Order No.
61-6413-68
Model No.
GRIR2-2025
JAN Code
4975846090552
Standard price
JPY: 58,000
USD: 360.88
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1set
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6413-43
Limit screw Ring Inspection M2 x P 0.4 GRIR2-0204
GRIR2-0204
1set
JPY: 65,000
USD: 404.43
61-6413-46
Limit screw Ring Inspection M2.6 x P 0.45 GRIR2-026045
GRIR2-026045
1set
JPY: 60,000
USD: 373.32
61-6413-47
Limit screw Ring Inspection M3 x P 0.5 GRIR2-0305
GRIR2-0305
1set
JPY: 53,000
USD: 329.77
61-6413-48
Limit screw Ring Inspection M4 x P 0.7 GRIR2-0407
GRIR2-0407
1set
JPY: 46,000
USD: 286.21
61-6413-49
Limit screw Ring Inspection M5 x P 0.8 GRIR2-0508
GRIR2-0508
1set
JPY: 46,000
USD: 286.21
61-6413-50
Limit screw Ring Inspection M6 x P 1.0 GRIR2-0610
GRIR2-0610
1set
JPY: 42,000
USD: 261.32
61-6413-51
Limit screw Ring Inspection M7 x P 1.0 GRIR2-0710
GRIR2-0710
1set
JPY: 42,000
USD: 261.32
61-6413-52
Limit screw Ring Inspection M8 x P 1.0 GRIR2-0810
GRIR2-0810
1set
JPY: 44,000
USD: 273.77
61-6413-53
Limit screw Ring Inspection M8 x P 1.25 GRIR2-08125
GRIR2-08125
1set
JPY: 42,000
USD: 261.32
61-6413-54
Limit screw Ring Inspection M10 x P 1.0 GRIR2-1010
GRIR2-1010
1set
JPY: 45,000
USD: 279.99
61-6413-55
Limit screw Ring Inspection M10 x P 1.25 GRIR2-10125
GRIR2-10125
1set
JPY: 42,000
USD: 261.32
61-6413-56
Limit screw Ring Inspection M10 x P 1.5 GRIR2-1015
GRIR2-1015
1set
JPY: 43,000
USD: 267.55
61-6413-57
Limit screw Ring Inspection M12 x 1.0 GRIR2-1210
GRIR2-1210
1set
JPY: 47,000
USD: 292.43
61-6413-58
Limit screw Ring Inspection M12 x P 1.25 GRIR2-12125
GRIR2-12125
1set
JPY: 45,000
USD: 279.99
61-6413-59
Limit screw Ring Inspection M12 x P 1.5 GRIR2-1215
GRIR2-1215
1set
JPY: 43,000
USD: 267.55
61-6413-60
Limit screw Ring Inspection M12 x P 1.75 GRIR2-12175
GRIR2-12175
1set
JPY: 45,000
USD: 279.99
61-6413-62
Limit screw Ring Inspection M14 x 2.0 GRIR2-1420
GRIR2-1420
1set
JPY: 48,000
USD: 298.66
61-6413-64
Limit screw Ring Inspection M16 x 2.0 GRIR2-1620
GRIR2-1620
1set
JPY: 51,000
USD: 317.32
61-6413-66
Limit screw Ring Inspection M18 x 2.5 GRIR2-1825
GRIR2-1825
1set
JPY: 54,000
USD: 335.99
61-6413-68
Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
GRIR2-2025
1set
JPY: 58,000
USD: 360.88
61-6413-44
［Discontinued］Limit Screw Ring Inspection M2.3 × P 0.4 GRIR2-02304
GRIR2-02304
1set
JPY: 44,800
USD: 278.75
-
61-6413-45
［Discontinued］Limit Screw Ring Inspection M2.5 × P 0.45 GRIR2-025045
GRIR2-025045
1set
JPY: 40,400
USD: 251.37
-
61-6413-61
［Discontinued］Limit Screw Ring Inspection M14 x 1.5 GRIR2-1415
GRIR2-1415
1set
JPY: 36,540
USD: 227.35
-
61-6413-63
［Discontinued］Limit Screw Ring Inspection M16 x 1.5 GRIR2-1615
GRIR2-1615
1set
JPY: 38,560
USD: 239.92
-
61-6413-65
［Discontinued］Limit Screw Ring Inspection M18 x 1.5 GRIR2-1815
GRIR2-1815
1set
JPY: 40,240
USD: 250.37
-
61-6413-67
［Discontinued］Limit Screw Ring Inspection M20 x 1.5 GRIR2-2015
GRIR2-2015
1set
JPY: 42,760
USD: 266.05
-
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
特徴
- You can inspect a threaded part at its predetermined upper and lower dimensional accuracy limits.
- It is a necessity to check screw accuracy! Screw accuracy can be checked easily at the side of the street side stop.
Spec
- screw Ring Set 2 Grade
- For Inspection: GPIP * Handicraft (GPWP, GRWR) is also available. *Please inquire about the ISO method.
- material : Alloy tool carbon steel
- Nominal Dimensions: M20 x P 2.5/outer diameter (mm): 50/T1 (mm): 22/T2 (mm): 15
- inspection in screw
- The limit thread gauge is determined to be the same gauge of screw grade as grade to be measured.
- This screw gauge is a measurement gauge that is tested by with two Dimensions differences, street and stop, at the upper and lower limits of threaded fastner's predetermined Dimensions accuracy.
- A gage is judged acceptable if it passes the limit thread gauge without difficulty and the stop gage does not screw in more than two rotations.
- Body Total length: 50 mm
Package sizePackage sizes="init">
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
特徴
- You can inspect a threaded part at its predetermined upper and lower dimensional accuracy limits.
- It is a necessity to check screw accuracy! Screw accuracy can be checked easily at the side of the street side stop.
仕様
- screw Ring Set 2 Grade
- For Inspection: GPIP * Handicraft (GPWP, GRWR) is also available. *Please inquire about the ISO method.
- material : Alloy tool carbon steel
- Nominal Dimensions: M20 x P 2.5/outer diameter (mm): 50/T1 (mm): 22/T2 (mm): 15
- inspection in screw
- The limit thread gauge is determined to be the same gauge of screw grade as grade to be measured.
- This screw gauge is a measurement gauge that is tested by with two Dimensions differences, street and stop, at the upper and lower limits of threaded fastner's predetermined Dimensions accuracy.
- A gage is judged acceptable if it passes the limit thread gauge without difficulty and the stop gage does not screw in more than two rotations.
- Body Total length: 50 mm
Package sizeASONEs="init">
61-6413-68 Limit screw Ring Inspection M20 x 2.5 GRIR2-2025
Features
- You can inspect a threaded part at its predetermined upper and lower dimensional accuracy limits.
- It is a necessity to check screw accuracy! Screw accuracy can be checked easily at the side of the street side stop.
Spec
- screw Ring Set 2 Grade
- For Inspection: GPIP * Handicraft (GPWP, GRWR) is also available. *Please inquire about the ISO method.
- material : Alloy tool carbon steel
- Nominal Dimensions: M20 x P 2.5/outer diameter (mm): 50/T1 (mm): 22/T2 (mm): 15
- inspection in screw
- The limit thread gauge is determined to be the same gauge of screw grade as grade to be measured.
- This screw gauge is a measurement gauge that is tested by with two Dimensions differences, street and stop, at the upper and lower limits of threaded fastner's predetermined Dimensions accuracy.
- A gage is judged acceptable if it passes the limit thread gauge without difficulty and the stop gage does not screw in more than two rotations.
- Body Total length: 50 mm
Package size：111×45×117 mm 580 g [About Package size]
| Order No. | 61-6413-68 | |
|---|---|---|
| Model No. | GRIR2-2025 | |
| JAN Code | 4975846090552 | |
| Standard price |
JPY: 58,000
USD: 360.88
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1set | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6413-43 | Limit screw Ring Inspection M2 x P 0.4 GRIR2-0204 | GRIR2-0204 | 1set | JPY: 65,000 | USD: 404.43 |
|
|
|
61-6413-46 | Limit screw Ring Inspection M2.6 x P 0.45 GRIR2-026045 | GRIR2-026045 | 1set | JPY: 60,000 | USD: 373.32 |
|
|
|
61-6413-47 | Limit screw Ring Inspection M3 x P 0.5 GRIR2-0305 | GRIR2-0305 | 1set | JPY: 53,000 | USD: 329.77 |
|
|
|
61-6413-48 | Limit screw Ring Inspection M4 x P 0.7 GRIR2-0407 | GRIR2-0407 | 1set | JPY: 46,000 | USD: 286.21 |
|
|
|
61-6413-49 | Limit screw Ring Inspection M5 x P 0.8 GRIR2-0508 | GRIR2-0508 | 1set | JPY: 46,000 | USD: 286.21 |
|
|
|
61-6413-50 | Limit screw Ring Inspection M6 x P 1.0 GRIR2-0610 | GRIR2-0610 | 1set | JPY: 42,000 | USD: 261.32 |
|
|
|
61-6413-51 | Limit screw Ring Inspection M7 x P 1.0 GRIR2-0710 | GRIR2-0710 | 1set | JPY: 42,000 | USD: 261.32 |
|
|
|
61-6413-52 | Limit screw Ring Inspection M8 x P 1.0 GRIR2-0810 | GRIR2-0810 | 1set | JPY: 44,000 | USD: 273.77 |
|
|
|
61-6413-53 | Limit screw Ring Inspection M8 x P 1.25 GRIR2-08125 | GRIR2-08125 | 1set | JPY: 42,000 | USD: 261.32 |
|
|
|
61-6413-54 | Limit screw Ring Inspection M10 x P 1.0 GRIR2-1010 | GRIR2-1010 | 1set | JPY: 45,000 | USD: 279.99 |
|
|
|
61-6413-55 | Limit screw Ring Inspection M10 x P 1.25 GRIR2-10125 | GRIR2-10125 | 1set | JPY: 42,000 | USD: 261.32 |
|
|
|
61-6413-56 | Limit screw Ring Inspection M10 x P 1.5 GRIR2-1015 | GRIR2-1015 | 1set | JPY: 43,000 | USD: 267.55 |
|
|
|
61-6413-57 | Limit screw Ring Inspection M12 x 1.0 GRIR2-1210 | GRIR2-1210 | 1set | JPY: 47,000 | USD: 292.43 |
|
|
|
61-6413-58 | Limit screw Ring Inspection M12 x P 1.25 GRIR2-12125 | GRIR2-12125 | 1set | JPY: 45,000 | USD: 279.99 |
|
|
|
61-6413-59 | Limit screw Ring Inspection M12 x P 1.5 GRIR2-1215 | GRIR2-1215 | 1set | JPY: 43,000 | USD: 267.55 |
|
|
|
61-6413-60 | Limit screw Ring Inspection M12 x P 1.75 GRIR2-12175 | GRIR2-12175 | 1set | JPY: 45,000 | USD: 279.99 |
|
|
|
61-6413-62 | Limit screw Ring Inspection M14 x 2.0 GRIR2-1420 | GRIR2-1420 | 1set | JPY: 48,000 | USD: 298.66 |
|
|
|
61-6413-64 | Limit screw Ring Inspection M16 x 2.0 GRIR2-1620 | GRIR2-1620 | 1set | JPY: 51,000 | USD: 317.32 |
|
|
|
61-6413-66 | Limit screw Ring Inspection M18 x 2.5 GRIR2-1825 | GRIR2-1825 | 1set | JPY: 54,000 | USD: 335.99 |
|
|
|
61-6413-68 | Limit screw Ring Inspection M20 x 2.5 GRIR2-2025 | GRIR2-2025 | 1set | JPY: 58,000 | USD: 360.88 |
|
|
|
61-6413-44 | ［Discontinued］Limit Screw Ring Inspection M2.3 × P 0.4 GRIR2-02304 | GRIR2-02304 | 1set | JPY: 44,800 | USD: 278.75 |
-
|
|
|
61-6413-45 | ［Discontinued］Limit Screw Ring Inspection M2.5 × P 0.45 GRIR2-025045 | GRIR2-025045 | 1set | JPY: 40,400 | USD: 251.37 |
-
|
|
|
61-6413-61 | ［Discontinued］Limit Screw Ring Inspection M14 x 1.5 GRIR2-1415 | GRIR2-1415 | 1set | JPY: 36,540 | USD: 227.35 |
-
|
|
|
61-6413-63 | ［Discontinued］Limit Screw Ring Inspection M16 x 1.5 GRIR2-1615 | GRIR2-1615 | 1set | JPY: 38,560 | USD: 239.92 |
-
|
|
|
61-6413-65 | ［Discontinued］Limit Screw Ring Inspection M18 x 1.5 GRIR2-1815 | GRIR2-1815 | 1set | JPY: 40,240 | USD: 250.37 |
-
|
|
|
61-6413-67 | ［Discontinued］Limit Screw Ring Inspection M20 x 1.5 GRIR2-2015 | GRIR2-2015 | 1set | JPY: 42,760 | USD: 266.05 |
-
|