61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50
Features
- Easily penetrates the steel sheet and fastens it to the wood.
- Since there are few dances, it is possible to perform one process work to surely penetrate and tighten the target part.
- Due to the adoption of the thin washer shape, the ground area with the member is large and does not swell even when the steel sheet is stacked.
- Adopts a single-threaded screw that is ideal for wood.
- It has a special cutting edge shape, so it is hard to break wood.
- For thin steel plates (thickness t=1.2 or less), pre-holes are not required.
- For Wooden Grounds
- Install steel plates/aluminum plates to wooded ground, wood to wooded ground, gypsum board to wooded ground, etc.
- Use thin steel plates with a thickness of 1.2 mm or less.
- It is not possible to construct from wood to steel plate.
SpecSpec class="init">
61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50 【AXEL GLOBAL】 アズワン
Contact us
SANKO TECHNO CO., LTD.
61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50
特徴
- Easily penetrates the steel sheet and fastens it to the wood.
- Since there are few dances, it is possible to perform one process work to surely penetrate and tighten the target part.
- Due to the adoption of the thin washer shape, the ground area with the member is large and does not swell even when the steel sheet is stacked.
- Adopts a single-threaded screw that is ideal for wood.
- It has a special cutting edge shape, so it is hard to break wood.
- For thin steel plates (thickness t=1.2 or less), pre-holes are not required.
- For Wooden Grounds
- Install steel plates/aluminum plates to wooded ground, wood to wooded ground, gypsum board to wooded ground, etc.
- Use thin steel plates with a thickness of 1.2 mm or less.
- It is not possible to construct from wood to steel plate.
Spec
- Nominal diameter: 4.8
- Screw length (mm): 60
- Screw length (mm): 60
- Nominal diameter (mm): 4.8
- Dimensions (mm) d x L: 4.8 x 65
- Length under head (mm): 65
- Head diameter (mm): 11.0
- Head height (mm): 2.1
- Applicable bit: TB-2
- Mass (g): 5.23
- Length under head (mm): 65
- In pack
- Steel
- Geomet processing
- Surface treatment: Geomet processing
- Quantity: 1 pack (50 pcs)
- Manufacturer's model number MMS4.8X65P50
- Code number: 558-5597
-
Package sizePackage sizes="init">
61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50 【AXEL GLOBAL】 アズワン
Contact us
SANKO TECHNO CO., LTD.
61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50
特徴
- Easily penetrates the steel sheet and fastens it to the wood.
- Since there are few dances, it is possible to perform one process work to surely penetrate and tighten the target part.
- Due to the adoption of the thin washer shape, the ground area with the member is large and does not swell even when the steel sheet is stacked.
- Adopts a single-threaded screw that is ideal for wood.
- It has a special cutting edge shape, so it is hard to break wood.
- For thin steel plates (thickness t=1.2 or less), pre-holes are not required.
- For Wooden Grounds
- Install steel plates/aluminum plates to wooded ground, wood to wooded ground, gypsum board to wooded ground, etc.
- Use thin steel plates with a thickness of 1.2 mm or less.
- It is not possible to construct from wood to steel plate.
仕様
- Nominal diameter: 4.8
- Screw length (mm): 60
- Screw length (mm): 60
- Nominal diameter (mm): 4.8
- Dimensions (mm) d x L: 4.8 x 65
- Length under head (mm): 65
- Head diameter (mm): 11.0
- Head height (mm): 2.1
- Applicable bit: TB-2
- Mass (g): 5.23
- Length under head (mm): 65
- In pack
- Steel
- Geomet processing
- Surface treatment: Geomet processing
- Quantity: 1 pack (50 pcs)
- Manufacturer's model number MMS4.8X65P50
- Code number: 558-5597
-
荷姿サイズ:110×73×42 mm 310 g
[荷姿サイズについて]
アズワン品番
61-5585-19
Model No.
MMS4.8X65P50
JANコード
4996620462051
標準価格
JPY: 1,400
USD: 8.78
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
50sets
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
型番
Length
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]

61-5585-15
Techno Screw MMS-P Type MMS4.8X18P150
MMS4.8X18P150
15mm
150sets
JPY: 1,400
USD: 8.78


61-5585-16
Techno Screw MMS-P Type MMS4.8X25P130
MMS4.8X25P130
22mm
130sets
JPY: 1,400
USD: 8.78


61-5585-17
Techno Screw MMS-P Type MMS4.8X35P100
MMS4.8X35P100
32mm
100sets
JPY: 1,400
USD: 8.78


61-5585-18
Techno Screw MMS-P Type MMS4.8X50P70
MMS4.8X50P70
47mm
70sets
JPY: 1,400
USD: 8.78


61-5585-19
Techno Screw MMS-P Type MMS4.8X65P50
MMS4.8X65P50
60mm
50sets
JPY: 1,400
USD: 8.78


61-5585-20
Techno Screw MMS-P Type MMS4.8X75P45
MMS4.8X75P45
60mm
45sets
JPY: 1,400
USD: 8.78


61-5585-21
Techno Screw MMS-P Type MMS4.8X90P35
MMS4.8X90P35
60mm
35sets
JPY: 1,400
USD: 8.78

61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50
特徴
- Easily penetrates the steel sheet and fastens it to the wood.
- Since there are few dances, it is possible to perform one process work to surely penetrate and tighten the target part.
- Due to the adoption of the thin washer shape, the ground area with the member is large and does not swell even when the steel sheet is stacked.
- Adopts a single-threaded screw that is ideal for wood.
- It has a special cutting edge shape, so it is hard to break wood.
- For thin steel plates (thickness t=1.2 or less), pre-holes are not required.
- For Wooden Grounds
- Install steel plates/aluminum plates to wooded ground, wood to wooded ground, gypsum board to wooded ground, etc.
- Use thin steel plates with a thickness of 1.2 mm or less.
- It is not possible to construct from wood to steel plate.
Spec
- Nominal diameter: 4.8
- Screw length (mm): 60
- Screw length (mm): 60
- Nominal diameter (mm): 4.8
- Dimensions (mm) d x L: 4.8 x 65
- Length under head (mm): 65
- Head diameter (mm): 11.0
- Head height (mm): 2.1
- Applicable bit: TB-2
- Mass (g): 5.23
- Length under head (mm): 65
- In pack
- Steel
- Geomet processing
- Surface treatment: Geomet processing
- Quantity: 1 pack (50 pcs)
- Manufacturer's model number MMS4.8X65P50
- Code number: 558-5597
Package sizePackage sizes="init">
61-5585-19 Techno Screw MMS-P Type MMS4.8X65P50
特徴
- Easily penetrates the steel sheet and fastens it to the wood.
- Since there are few dances, it is possible to perform one process work to surely penetrate and tighten the target part.
- Due to the adoption of the thin washer shape, the ground area with the member is large and does not swell even when the steel sheet is stacked.
- Adopts a single-threaded screw that is ideal for wood.
- It has a special cutting edge shape, so it is hard to break wood.
- For thin steel plates (thickness t=1.2 or less), pre-holes are not required.
- For Wooden Grounds
- Install steel plates/aluminum plates to wooded ground, wood to wooded ground, gypsum board to wooded ground, etc.
- Use thin steel plates with a thickness of 1.2 mm or less.
- It is not possible to construct from wood to steel plate.
仕様
- Nominal diameter: 4.8
- Screw length (mm): 60
- Screw length (mm): 60
- Nominal diameter (mm): 4.8
- Dimensions (mm) d x L: 4.8 x 65
- Length under head (mm): 65
- Head diameter (mm): 11.0
- Head height (mm): 2.1
- Applicable bit: TB-2
- Mass (g): 5.23
- Length under head (mm): 65
- In pack
- Steel
- Geomet processing
- Surface treatment: Geomet processing
- Quantity: 1 pack (50 pcs)
- Manufacturer's model number MMS4.8X65P50
- Code number: 558-5597
荷姿サイズ:110×73×42 mm 310 g [荷姿サイズについて]
| アズワン品番 | 61-5585-19 | |
|---|---|---|
| Model No. | MMS4.8X65P50 | |
| JANコード | 4996620462051 | |
| 標準価格 |
JPY: 1,400
USD: 8.78
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 50sets | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | 型番 |
Length |
入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|---|
![]() |
61-5585-15 | Techno Screw MMS-P Type MMS4.8X18P150 | MMS4.8X18P150 | 15mm | 150sets | JPY: 1,400 | USD: 8.78 |
|
|
![]() |
61-5585-16 | Techno Screw MMS-P Type MMS4.8X25P130 | MMS4.8X25P130 | 22mm | 130sets | JPY: 1,400 | USD: 8.78 |
|
|
![]() |
61-5585-17 | Techno Screw MMS-P Type MMS4.8X35P100 | MMS4.8X35P100 | 32mm | 100sets | JPY: 1,400 | USD: 8.78 |
|
|
![]() |
61-5585-18 | Techno Screw MMS-P Type MMS4.8X50P70 | MMS4.8X50P70 | 47mm | 70sets | JPY: 1,400 | USD: 8.78 |
|
|
![]() |
61-5585-19 | Techno Screw MMS-P Type MMS4.8X65P50 | MMS4.8X65P50 | 60mm | 50sets | JPY: 1,400 | USD: 8.78 |
|
|
![]() |
61-5585-20 | Techno Screw MMS-P Type MMS4.8X75P45 | MMS4.8X75P45 | 60mm | 45sets | JPY: 1,400 | USD: 8.78 |
|
|
![]() |
61-5585-21 | Techno Screw MMS-P Type MMS4.8X90P35 | MMS4.8X90P35 | 60mm | 35sets | JPY: 1,400 | USD: 8.78 |
|
