61-2640-96 Albatross institute candle type Cemented Carbide N-873
Features
- Carbide spot drill can be polished to candle shape.
- You can polish just by setting the drill to the chuck and inserting it.
- Can be thinned and polished.
- You can perform chamfer polishing.
- Super steel spot cutter can be repolished.
- Just insert the chuck into the cutting edge setter and set the cutting edge.
- You can polish the cutting edge just by inserting it into the cutting edge polishing port.
- You can perform thinning polishing by simply inserting it into the thinning polishing port.
- Chamfer polishing is also available.
- Can be polished to a candle shape without burrs.
- For repolishing carbide drills and carbide spot cutters.
- For Repolishing Super Steel Spot Cutter
Spec
- Grinding Stone diameter (mm): 48
- motor Speed r.p.m. (rpm): 20000
- Height (mm): 195
- polishing can Size (mm): Straight shaft 3.0 to 13
- Width (mm): 180
- Grinding Stone Material: Diamond #170
- Depth (mm): 175
- Power (V): Single phase 100
- width x Depth x Height (mm): 175x195x180
- rated hour (minutes): 15
- Cable length (cm): 170
- edge polishing angle (degrees): 186
- clearance angle (degrees): 4.5
- rated Power consumption (W): 130
- rated power Current (A): 1.3
- Mass (kg): 4.2
- Power supply: Single phase 100 v
- Power Cable Length: 1. 7m
- motor rated Power consumption: 130W
- motor rated hour: 15 minutes
- tip polishing angle: 186 °
- over angle: 4.5 °
- thinning Shape: X type
- polishing machine Body: ABS resin
- edge setting instrument: ABS resin
- A chuck: ABS resin
- Application: Cemented Carbide Drill, Cemented carbide. Pot Cutter of polishing. Cemented carbide. Pot Cutter of polishing
- Country of origin: Japan
- Weight: 4.2kg
- Set content: edge setting device, a chuck, Instruction manual
- * Precision equipment with dropped or throwing the Do not.
- * High-speed steel Drill is polishing can't
- Manufacturer's model number: N873
- CODE No.: 435-3005
Package sizePackage sizes="init">
61-2640-96 Albatross institute candle type Cemented Carbide N-873
特徴
- Carbide spot drill can be polished to candle shape.
- You can polish just by setting the drill to the chuck and inserting it.
- Can be thinned and polished.
- You can perform chamfer polishing.
- Super steel spot cutter can be repolished.
- Just insert the chuck into the cutting edge setter and set the cutting edge.
- You can polish the cutting edge just by inserting it into the cutting edge polishing port.
- You can perform thinning polishing by simply inserting it into the thinning polishing port.
- Chamfer polishing is also available.
- Can be polished to a candle shape without burrs.
- For repolishing carbide drills and carbide spot cutters.
- For Repolishing Super Steel Spot Cutter
仕様
- Grinding Stone diameter (mm): 48
- motor Speed r.p.m. (rpm): 20000
- Height (mm): 195
- polishing can Size (mm): Straight shaft 3.0 to 13
- Width (mm): 180
- Grinding Stone Material: Diamond #170
- Depth (mm): 175
- Power (V): Single phase 100
- width x Depth x Height (mm): 175x195x180
- rated hour (minutes): 15
- Cable length (cm): 170
- edge polishing angle (degrees): 186
- clearance angle (degrees): 4.5
- rated Power consumption (W): 130
- rated power Current (A): 1.3
- Mass (kg): 4.2
- Power supply: Single phase 100 v
- Power Cable Length: 1. 7m
- motor rated Power consumption: 130W
- motor rated hour: 15 minutes
- tip polishing angle: 186 °
- over angle: 4.5 °
- thinning Shape: X type
- polishing machine Body: ABS resin
- edge setting instrument: ABS resin
- A chuck: ABS resin
- Application: Cemented Carbide Drill, Cemented carbide. Pot Cutter of polishing. Cemented carbide. Pot Cutter of polishing
- Country of origin: Japan
- Weight: 4.2kg
- Set content: edge setting device, a chuck, Instruction manual
- * Precision equipment with dropped or throwing the Do not.
- * High-speed steel Drill is polishing can't
- Manufacturer's model number: N873
- CODE No.: 435-3005
荷姿サイズ：224×334×237 mm 5.41 kg [About Package size]
| アズワン品番 | 61-2640-96 | |
|---|---|---|
| 型番 | N-873 | |
| JANコード | 4964590870039 | |
| 標準価格 |
JPY: 76,923
USD: 482.52
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1unit | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 |
Product categories |
Polishable size (mm) |
入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-2640-96 | Albatross institute candle type Cemented Carbide N-873 | N-873 | Drill grinder | Straight axis 3.0 to 13 | 1unit | JPY: 76,923 | USD: 482.52 |
|
|
 |
61-2640-97 | Albatross institute candle for Grinding Stone Cemented Carbide N-8731 | N-8731 | Grinding stone for drill polishing machine | 1piece | JPY: 7,693 | USD: 48.26 |
|