AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
TRUSCO NAKAYAMA CORPORATION

61-2633-18　End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10

Features

  • It has a shaft for easy installation and replacement.
  • Compact, high-speed rotation makes it easy to operate, and it is an end-type brush with excellent workability.
  • The end shape makes it ideal for polishing the bottom and corner grooves of fine areas.
  • Tool used: variable speed electric microgrinder.

Spec

  • Wire diameter (mm): 0.2
  • Hair material: Aramid fiber
  • Outer diameter (mm): 8
  • hair length (mm): 12
  • axial length (mm): 36
  • shaft diameter (mm): 3
  • Maximum operating Speed r.p.m. (rpm): 15000
  • Description: metal molds, etc., Cleaning
  • Mass (G): 4.2
  • axis: Brass
  • Hair material: Aramid (heat resistance Nylon)
  • Application: end type so unit minutes on the bottom, corner groove polishing. Use Tool: speed type Electric Micro Grinder.
  • Country of origin: Japan
  • Weight: 4. 2g
  • * work is always safety helmet, Safety Glasses of Protective Equipment"wearing.
  • * Maximum operating Speed r.p.m. or less used.
  • Manufacturer's model number: 83E10
  • CODE No.: 259-1341
  •  

Package size：51×131×21 mm　20 g　 [荷姿サイズについて]

Order No.Order No.ss="init"> 61-2633-18 End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
TRUSCO NAKAYAMA CORPORATION

61-2633-18　End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10

特徴

  • It has a shaft for easy installation and replacement.
  • Compact, high-speed rotation makes it easy to operate, and it is an end-type brush with excellent workability.
  • The end shape makes it ideal for polishing the bottom and corner grooves of fine areas.
  • Tool used: variable speed electric microgrinder.

仕様

  • Wire diameter (mm): 0.2
  • Hair material: Aramid fiber
  • Outer diameter (mm): 8
  • hair length (mm): 12
  • axial length (mm): 36
  • shaft diameter (mm): 3
  • Maximum operating Speed r.p.m. (rpm): 15000
  • Description: metal molds, etc., Cleaning
  • Mass (G): 4.2
  • axis: Brass
  • Hair material: Aramid (heat resistance Nylon)
  • Application: end type so unit minutes on the bottom, corner groove polishing. Use Tool: speed type Electric Micro Grinder.
  • Country of origin: Japan
  • Weight: 4. 2g
  • * work is always safety helmet, Safety Glasses of Protective Equipment"wearing.
  • * Maximum operating Speed r.p.m. or less used.
  • Manufacturer's model number: 83E10
  • CODE No.: 259-1341
  •  

荷姿サイズ：51×131×21 mm　20 g　 [荷姿サイズについて]

アズワン品番 61-2633-18
型番 83E-10
JANコード 4989999251951
Standard price JPY: 1,371 USD: 8.60
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数 1piece
在庫数
サプライヤ在庫

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product imageProduct imagess="init"> 61-2633-18 End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
TRUSCO NAKAYAMA CORPORATION

61-2633-18　End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10

特徴

  • It has a shaft for easy installation and replacement.
  • Compact, high-speed rotation makes it easy to operate, and it is an end-type brush with excellent workability.
  • The end shape makes it ideal for polishing the bottom and corner grooves of fine areas.
  • Tool used: variable speed electric microgrinder.

仕様

  • Wire diameter (mm): 0.2
  • Hair material: Aramid fiber
  • Outer diameter (mm): 8
  • hair length (mm): 12
  • axial length (mm): 36
  • shaft diameter (mm): 3
  • Maximum operating Speed r.p.m. (rpm): 15000
  • Description: metal molds, etc., Cleaning
  • Mass (G): 4.2
  • axis: Brass
  • Hair material: Aramid (heat resistance Nylon)
  • Application: end type so unit minutes on the bottom, corner groove polishing. Use Tool: speed type Electric Micro Grinder.
  • Country of origin: Japan
  • Weight: 4. 2g
  • * work is always safety helmet, Safety Glasses of Protective Equipment"wearing.
  • * Maximum operating Speed r.p.m. or less used.
  • Manufacturer's model number: 83E10
  • CODE No.: 259-1341
  •  

荷姿サイズ：51×131×21 mm　20 g　 [荷姿サイズについて]

アズワン品番 61-2633-18
型番 83E-10
JANコード 4989999251951
標準価格 JPY: 1,371 USD: 8.60
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity 1piece
在庫数
サプライヤ在庫

商品のバリエーション （サイズ違い・スペック違い・オプション品など）

商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
61-2633-13 End type Brush hardness Steel wire line 0.1 x cylinder diameter Φ8 X axis Φ3　83E-2 83E-2 1piece JPY: 1,354 USD: 8.49

61-2633-14 End type Brush Brass wire 0.1 X cylinder diameter Φ8 X axis Φ3　83E-3 83E-3 1piece JPY: 994 USD: 6.24

61-2633-15 End type Brush Stainless steel wire 0.1 x cylinder diameter Φ8 X axis Φ3　83E-4 83E-4 1piece JPY: 1,209 USD: 7.58

61-2633-16 End type Brush Nylon line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-6 83E-6 1piece JPY: 849 USD: 5.33

61-2633-17 End type Brush diamond Nylon line 0.3 x cylinder diameter Φ8 X axis Φ3　83E-7 83E-7 1piece JPY: 4,226 USD: 26.51

61-2633-18 End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10 83E-10 1piece JPY: 1,371 USD: 8.60

61-2633-19 End type Brush Mono Eight line 0.15 x cylinder diameter Φ8 X axis Φ3　83E-11 83E-11 1piece JPY: 1,260 USD: 7.90

61-2633-20 End type Brush abrasive grains Nylon line 0.3 x cylinder diameter Φ8 X axis Φ3　83E-12 83E-12 1piece JPY: 1,123 USD: 7.04

61-2633-22 End type Brush Stainless steel wire 0.1 x Outer Diameter Φ8 X axis Φ350 pieces　83E-4-50P 83E-4-50P 1box(50pieces) JPY: 56,486 USD: 354.32

61-2633-12 ［Discontinued］End type Brush iron wave line 0.12 x cylinder diameter Φ8 X axis Φ3　830 830 1set JPY: 780 USD: 4.89

-
61-2633-21 ［Discontinued］End type Brush iron wave line 0.12 x Outer Diameter Φ8 X axis Φ350 pieces　83E150P 83E150P 50sets JPY: 36,591 USD: 229.53

-

This page is the page of End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init"> 61-2633-18 End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
TRUSCO NAKAYAMA CORPORATION

61-2633-18　End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10

Features

  • It has a shaft for easy installation and replacement.
  • Compact, high-speed rotation makes it easy to operate, and it is an end-type brush with excellent workability.
  • The end shape makes it ideal for polishing the bottom and corner grooves of fine areas.
  • Tool used: variable speed electric microgrinder.

Spec

  • Wire diameter (mm): 0.2
  • Hair material: Aramid fiber
  • Outer diameter (mm): 8
  • hair length (mm): 12
  • axial length (mm): 36
  • shaft diameter (mm): 3
  • Maximum operating Speed r.p.m. (rpm): 15000
  • Description: metal molds, etc., Cleaning
  • Mass (G): 4.2
  • axis: Brass
  • Hair material: Aramid (heat resistance Nylon)
  • Application: end type so unit minutes on the bottom, corner groove polishing. Use Tool: speed type Electric Micro Grinder.
  • Country of origin: Japan
  • Weight: 4. 2g
  • * work is always safety helmet, Safety Glasses of Protective Equipment"wearing.
  • * Maximum operating Speed r.p.m. or less used.
  • Manufacturer's model number: 83E10
  • CODE No.: 259-1341
  •  

Package size：51×131×21 mm　20 g　 [About Package size]

Order No. 61-2633-18
Model No. 83E-10
JAN Code 4989999251951
Standard price JPY: 1,371 USD: 8.60
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
61-2633-13 End type Brush hardness Steel wire line 0.1 x cylinder diameter Φ8 X axis Φ3　83E-2 83E-2 1piece JPY: 1,354 USD: 8.49

61-2633-14 End type Brush Brass wire 0.1 X cylinder diameter Φ8 X axis Φ3　83E-3 83E-3 1piece JPY: 994 USD: 6.24

61-2633-15 End type Brush Stainless steel wire 0.1 x cylinder diameter Φ8 X axis Φ3　83E-4 83E-4 1piece JPY: 1,209 USD: 7.58

61-2633-16 End type Brush Nylon line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-6 83E-6 1piece JPY: 849 USD: 5.33

61-2633-17 End type Brush diamond Nylon line 0.3 x cylinder diameter Φ8 X axis Φ3　83E-7 83E-7 1piece JPY: 4,226 USD: 26.51

61-2633-18 End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3　83E-10 83E-10 1piece JPY: 1,371 USD: 8.60

61-2633-19 End type Brush Mono Eight line 0.15 x cylinder diameter Φ8 X axis Φ3　83E-11 83E-11 1piece JPY: 1,260 USD: 7.90

61-2633-20 End type Brush abrasive grains Nylon line 0.3 x cylinder diameter Φ8 X axis Φ3　83E-12 83E-12 1piece JPY: 1,123 USD: 7.04

61-2633-22 End type Brush Stainless steel wire 0.1 x Outer Diameter Φ8 X axis Φ350 pieces　83E-4-50P 83E-4-50P 1box(50pieces) JPY: 56,486 USD: 354.32

61-2633-12 ［Discontinued］End type Brush iron wave line 0.12 x cylinder diameter Φ8 X axis Φ3　830 830 1set JPY: 780 USD: 4.89

-
61-2633-21 ［Discontinued］End type Brush iron wave line 0.12 x Outer Diameter Φ8 X axis Φ350 pieces　83E150P 83E150P 50sets JPY: 36,591 USD: 229.53

-

This page is the page of End type Brush Aramid fiber line 0.2 x cylinder diameter Φ8 X axis Φ3 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.