61-2541-11 R ecozem motor M-101E
Features
- In pursuit of miniaturization and weight reduction, we have achieved an ultra-light weight of 100 g.
- Air consumption is reduced by 40% (compared to our company) and is recommended as an environmentally friendly product.
- The forced refueling system provides a long life under severe conditions.
- Standard accessory rubber sleeve increases grip strength and absorbs vibration to reduce fatigue.
- Air consumption was reduced by 40% compared to our company. CO2 reduction is achieved by reducing electricity consumption.
- Post-processing of metal deburring, beveling, polishing, carving, and internal machining.
- Cutting of wood, stone, plastic, etc.
- Surface finish after welding.
Spec
- Chuck Inner diameter (mm): 3
- no load Speed r.p.m. (rpm): 48000
- Air consumption (m3/min): 0.1
- Hose inlet: R1/4
- exhaust: Back
- Length (mm): 137
- Mass (G): 100
- use Air Pressure: 0. 4MPa
- throttle system: ON/OFF Valve
- Applicable shaft diameter: 3mm (optional collet exchange 1.6・2.35 mm axis Correspond)
- exhaust direction: Back
- Application: Metal of deburring, chamfers, polishing, sculptures, inner surface Processing post-processing. Wood, stone, Plastic such as cutting Processing weld after surface finish.
- Country of origin: Japan
- Weight: 100g
- Manufacturer's model number: M101E
- CODE No.: 288-3775
Package sizePackage sizes="init">
61-2541-11 R ecozem motor M-101E
特徴
- In pursuit of miniaturization and weight reduction, we have achieved an ultra-light weight of 100 g.
- Air consumption is reduced by 40% (compared to our company) and is recommended as an environmentally friendly product.
- The forced refueling system provides a long life under severe conditions.
- Standard accessory rubber sleeve increases grip strength and absorbs vibration to reduce fatigue.
- Air consumption was reduced by 40% compared to our company. CO2 reduction is achieved by reducing electricity consumption.
- Post-processing of metal deburring, beveling, polishing, carving, and internal machining.
- Cutting of wood, stone, plastic, etc.
- Surface finish after welding.
仕様
- Chuck Inner diameter (mm): 3
- no load Speed r.p.m. (rpm): 48000
- Air consumption (m3/min): 0.1
- Hose inlet: R1/4
- exhaust: Back
- Length (mm): 137
- Mass (G): 100
- use Air Pressure: 0. 4MPa
- throttle system: ON/OFF Valve
- Applicable shaft diameter: 3mm (optional collet exchange 1.6・2.35 mm axis Correspond)
- exhaust direction: Back
- Application: Metal of deburring, chamfers, polishing, sculptures, inner surface Processing post-processing. Wood, stone, Plastic such as cutting Processing weld after surface finish.
- Country of origin: Japan
- Weight: 100g
- Manufacturer's model number: M101E
- CODE No.: 288-3775
荷姿サイズ：110×234×62 mm 510 g [荷姿サイズについて]
| Order No. | 61-2541-11 | |
|---|---|---|
| 型番 | M-101E | |
| JANコード | 4526587331277 | |
| 標準価格 |
JPY: 43,320
USD: 269.54
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|