61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
Features
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
Spec
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
*This product might require extra fees.Spec class="init">
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
KAWASHIMO KIKO Co., Ltd.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
-
*This product might require extra fees.*This product might require extra fees.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
KAWASHIMO KIKO Co., Ltd.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
-
*This product might require extra fees.
荷姿サイズ：200×210×60 mm 1.1 kg
[About Package size]
Order No.Order No.ss="init">
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
KAWASHIMO KIKO Co., Ltd.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
-
※この商品は別途費用が発生する場合があります。
荷姿サイズ：200×210×60 mm 1.1 kg
[荷姿サイズについて]
アズワン品番
61-1812-29
Model No.
P5-14
JANコード
4571127531037
Standard price
JPY: 19,000
USD: 118.22
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-1812-29
Chuck Mate "hydraulic" 5 inch 14mm P5-14
P5-14
1piece
JPY: 19,000
USD: 118.22
61-1812-30
Chuck Mate "hydraulic" 6 inch 14mm P6-14
P6-14
1piece
JPY: 21,375
USD: 133.00
61-1812-31
Chuck Mate "hydraulic" 6 inch 17mm P6-17
P6-17
1piece
JPY: 21,375
USD: 133.00
61-1812-32
Chuck Mate "hydraulic" 8 inch 17mm P8-17
P8-17
1piece
JPY: 27,625
USD: 171.88
61-1812-33
Chuck Mate "hydraulic" 8 inch 19mm P8-19
P8-19
1piece
JPY: 27,625
USD: 171.88
61-1812-34
Chuck Mate "hydraulic" 8 inch 20mm P8-20
P8-20
1piece
JPY: 27,625
USD: 171.88
61-1812-35
Chuck Mate "hydraulic" 10 inch 19mm P10-19
P10-19
1piece
JPY: 33,000
USD: 205.33
61-1812-36
Chuck Mate "hydraulic" 10 inch 20mm P10-20
P10-20
1piece
JPY: 33,000
USD: 205.33
61-1812-37
Chuck Mate "hydraulic" 12inch 19mm P12N-19
P12N-19
1piece
JPY: 44,875
USD: 279.21
61-1812-38
Chuck Mate "hydraulic" 12inch 20mm P12N-20
P12N-20
1piece
JPY: 44,875
USD: 279.21
61-1812-39
Chuck Mate "hydraulic" 12inch 22mm P12N-22
P12N-22
1piece
JPY: 44,875
USD: 279.21
61-1812-40
Chuck Mate "hydraulic" 12inch 23mm P12N-23
P12N-23
1piece
JPY: 44,875
USD: 279.21
61-1812-41
Chuck Mate "hydraulic" 12inch 25mm P12N-25
P12N-25
1piece
JPY: 44,875
USD: 279.21
61-1812-42
Chuck Mate "hydraulic" 15 inch 32mm P15-32
P15-32
1piece
JPY: 62,875
USD: 391.21
61-1812-43
Chuck Mate "hand tightening" 7 inch 17mm S7-17
S7-17
1piece
JPY: 28,500
USD: 177.33
61-1812-44
Chuck Mate "hand tightening" 9 inch 19mm S9-19
S9-19
1piece
JPY: 34,375
USD: 213.88
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
*This product might require extra fees.*This product might require extra fees.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
KAWASHIMO KIKO Co., Ltd.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
-
*This product might require extra fees.
荷姿サイズ：200×210×60 mm 1.1 kg
[About Package size]
Order No.Order No.ss="init">
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
KAWASHIMO KIKO Co., Ltd.
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
-
※この商品は別途費用が発生する場合があります。
荷姿サイズ：200×210×60 mm 1.1 kg
[荷姿サイズについて]
アズワン品番
61-1812-29
Model No.
P5-14
JANコード
4571127531037
Standard price
JPY: 19,000
USD: 118.22
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-1812-29
Chuck Mate "hydraulic" 5 inch 14mm P5-14
P5-14
1piece
JPY: 19,000
USD: 118.22
61-1812-30
Chuck Mate "hydraulic" 6 inch 14mm P6-14
P6-14
1piece
JPY: 21,375
USD: 133.00
61-1812-31
Chuck Mate "hydraulic" 6 inch 17mm P6-17
P6-17
1piece
JPY: 21,375
USD: 133.00
61-1812-32
Chuck Mate "hydraulic" 8 inch 17mm P8-17
P8-17
1piece
JPY: 27,625
USD: 171.88
61-1812-33
Chuck Mate "hydraulic" 8 inch 19mm P8-19
P8-19
1piece
JPY: 27,625
USD: 171.88
61-1812-34
Chuck Mate "hydraulic" 8 inch 20mm P8-20
P8-20
1piece
JPY: 27,625
USD: 171.88
61-1812-35
Chuck Mate "hydraulic" 10 inch 19mm P10-19
P10-19
1piece
JPY: 33,000
USD: 205.33
61-1812-36
Chuck Mate "hydraulic" 10 inch 20mm P10-20
P10-20
1piece
JPY: 33,000
USD: 205.33
61-1812-37
Chuck Mate "hydraulic" 12inch 19mm P12N-19
P12N-19
1piece
JPY: 44,875
USD: 279.21
61-1812-38
Chuck Mate "hydraulic" 12inch 20mm P12N-20
P12N-20
1piece
JPY: 44,875
USD: 279.21
61-1812-39
Chuck Mate "hydraulic" 12inch 22mm P12N-22
P12N-22
1piece
JPY: 44,875
USD: 279.21
61-1812-40
Chuck Mate "hydraulic" 12inch 23mm P12N-23
P12N-23
1piece
JPY: 44,875
USD: 279.21
61-1812-41
Chuck Mate "hydraulic" 12inch 25mm P12N-25
P12N-25
1piece
JPY: 44,875
USD: 279.21
61-1812-42
Chuck Mate "hydraulic" 15 inch 32mm P15-32
P15-32
1piece
JPY: 62,875
USD: 391.21
61-1812-43
Chuck Mate "hand tightening" 7 inch 17mm S7-17
S7-17
1piece
JPY: 28,500
USD: 177.33
61-1812-44
Chuck Mate "hand tightening" 9 inch 19mm S9-19
S9-19
1piece
JPY: 34,375
USD: 213.88
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14
特徴
- The raw nail molding step is within 1 minute. Processing is also completed in a short time. Even for inexperienced users, centering is possible with one touch. Core runout accuracy of 10 microns or less.
- You can measure calipers while wearing it without disturbing permanent tooling.
- To use it, simply open the chuck and insert three pins of the chuck mate into the attachment hole of the raw nail and tighten the chuck. In the case of a tension chuck, the reverse operation is performed.
- For a holder for forming raw nails during chuck work.
仕様
- Conform chuck Outer diameter (inch): 5
- pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum Processing Dimensions (mm): 65
- Mass (kg): 1.1
- Application: chuck work when the soft jaw molding holder.
- Country of origin: Japan
- Weight: 1.1kg
- Manufacturer's model number: P5 14
- CODE No.: 103-1848
*This product might require extra fees.
荷姿サイズ：200×210×60 mm 1.1 kg [About Package size]
Order No.Order No.ss="init">
61-1812-29 Chuck Mate "hydraulic" 5 inch 14mm P5-14特徴
仕様
※この商品は別途費用が発生する場合があります。荷姿サイズ：200×210×60 mm 1.1 kg [荷姿サイズについて]
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|