61-1524-39 ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 20 XR2) FX-CR-MG-EHS-20XR2
Features
- Positive cutting edge with good sharpness prevents the occurrence of work hardening, etc.
- With corner R, it can handle various cutter paths.
- The sharp, positive cutting blade prevents work hardening, etc., and since it has a corner R, it can handle various cutter paths.
- Work Material: Carbon Steel, Alloy Steel, Tool Steel (~40HRC), Pre-Hardened Steel, Quenched Steel (~45HRC), Stainless Steel (~35HRC), Cast Iron, Ductile Cast Iron (~350HB), Titanium Alloy, Heat Resistant Alloy.
Spec
- Manufacturer's model number: FXCRMGEHS20XR2
- CODE No.: 690-2839
| Order No. | 61-1524-39 | |
|---|---|---|
| Model No. | FX-CR-MG-EHS-20XR2 | |
| Standard price |
JPY: 91,750
USD: 575.13
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. |
Blade diameter |
Blade length |
Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1524-33 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 16 XR 0.5) FX-CR-MG-EHS-16XR0.5 | FX-CR-MG-EHS-16XR0.5 | 16mm | 32mm | 1piece | JPY: 62,000 | USD: 388.64 |
-
|
|
 |
61-1524-34 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 16 XR1) FX-CR-MG-EHS-16XR1 | FX-CR-MG-EHS-16XR1 | 16mm | 32mm | 1piece | JPY: 62,000 | USD: 388.64 |
-
|
|
 |
61-1524-35 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 16 XR2) FX-CR-MG-EHS-16XR2 | FX-CR-MG-EHS-16XR2 | 16mm | 32mm | 1piece | JPY: 62,000 | USD: 388.64 |
-
|
|
 |
61-1524-36 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 16 XR3) FX-CR-MG-EHS-16XR3 | FX-CR-MG-EHS-16XR3 | 16mm | 32mm | 1piece | JPY: 62,000 | USD: 388.64 |
-
|
|
 |
61-1524-37 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 20 XR 0.5) FX-CR-MG-EHS-20XR0.5 | FX-CR-MG-EHS-20XR0.5 | 20mm | 38mm | 1piece | JPY: 91,750 | USD: 575.13 |
-
|
|
 |
61-1524-38 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 20 XR1) FX-CR-MG-EHS-20XR1 | FX-CR-MG-EHS-20XR1 | 20mm | 38mm | 1piece | JPY: 91,750 | USD: 575.13 |
-
|
|
 |
61-1524-39 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 20 XR2) FX-CR-MG-EHS-20XR2 | FX-CR-MG-EHS-20XR2 | 20mm | 38mm | 1piece | JPY: 91,750 | USD: 575.13 |
-
|
|
 |
61-1524-40 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 20 XR3) FX-CR-MG-EHS-20XR3 | FX-CR-MG-EHS-20XR3 | 20mm | 38mm | 1piece | JPY: 91,750 | USD: 575.13 |
-
|
|
 |
61-1524-41 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 25 XR 0.5) FX-CR-MG-EHS-25XR0.5 | FX-CR-MG-EHS-25XR0.5 | 25mm | 45mm | 1piece | JPY: 140,000 | USD: 877.58 |
-
|
|
 |
61-1524-42 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 25 XR1) FX-CR-MG-EHS-25XR1 | FX-CR-MG-EHS-25XR1 | 25mm | 45mm | 1piece | JPY: 140,000 | USD: 877.58 |
-
|
|
 |
61-1524-43 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 25 XR2) FX-CR-MG-EHS-25XR2 | FX-CR-MG-EHS-25XR2 | 25mm | 45mm | 1piece | JPY: 140,000 | USD: 877.58 |
-
|
|
 |
61-1524-44 | ［Discontinued］OSG Carbide Endmill (Model Number: FXCRMGEHS 25 XR3) FX-CR-MG-EHS-25XR3 | FX-CR-MG-EHS-25XR3 | 25mm | 45mm | 1piece | JPY: 140,000 | USD: 877.58 |
-
|