AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
Mitsubishi Materials Corporation

61-1270-45　MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650

Features

  • 4 blades realized groove cutting. It has the same amount of cut as the conventional 2-blade, and twice the feed speed.
  • Due to the special groove shape, chip discharge is greatly improved and heavy cutting is possible.
  • Work Material: Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel (Austenitic), High Hardness Steel (~55HRC), Heat Resistant Alloy, Copper Alloy.

Spec

  • Blade diameter (mm): 6.5
  • blade length (mm): 16
  • Length (mm): 60
  • Shank diameter (mm): 8
  • Surface treatment: (Al, Ti) N coating (MS)
  • screw square 45 °
  • Center sheet: with
  • pole ultrafine particles Cemented carbide (UWC)
  • Application: workpiece: Carbon steel, alloy steel, Carbon tool steel, Stainless steel (austenitic), hardened steel, Heat resistance alloy.
  • Country of origin: Japan
  • Manufacturer's model number: MSMHDD0650
  • CODE No.: 687-6676
  •  

Package size：12×63×15 mm　40 g　 [About Package sizePackage sizes="init"> 61-1270-45 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
Mitsubishi Materials Corporation

61-1270-45　MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650

特徴

  • 4 blades realized groove cutting. It has the same amount of cut as the conventional 2-blade, and twice the feed speed.
  • Due to the special groove shape, chip discharge is greatly improved and heavy cutting is possible.
  • Work Material: Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel (Austenitic), High Hardness Steel (~55HRC), Heat Resistant Alloy, Copper Alloy.

仕様

  • Blade diameter (mm): 6.5
  • blade length (mm): 16
  • Length (mm): 60
  • Shank diameter (mm): 8
  • Surface treatment: (Al, Ti) N coating (MS)
  • screw square 45 °
  • Center sheet: with
  • pole ultrafine particles Cemented carbide (UWC)
  • Application: workpiece: Carbon steel, alloy steel, Carbon tool steel, Stainless steel (austenitic), hardened steel, Heat resistance alloy.
  • Country of origin: Japan
  • Manufacturer's model number: MSMHDD0650
  • CODE No.: 687-6676
  •  

荷姿サイズ：12×63×15 mm　40 g　 [荷姿サイズについて]

アズワン品番 61-1270-45
Model No. MSMHDD0650
JANコード 4994196449896
標準価格 JPY: 14,100 USD: 87.73
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Blade diameter
 Blade length
 Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
61-1270-04 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.0 × Blade length 4mm)　MSMHDD0200 MSMHDD0200 2.0mm 4.0mm 1piece JPY: 5,990 USD: 37.27

61-1270-05 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.1 x Blade length 5mm)　MSMHDD0210 MSMHDD0210 2.1mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-06 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.2 x Blade length 5mm)　MSMHDD0220 MSMHDD0220 2.2mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-07 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.3 x Blade length 5mm)　MSMHDD0230 MSMHDD0230 2.3mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-08 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.4 x Blade length 5mm)　MSMHDD0240 MSMHDD0240 2.4mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-09 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.5 x Blade length 5mm)　MSMHDD0250 MSMHDD0250 2.5mm 5.0mm 1piece JPY: 7,180 USD: 44.67

61-1270-10 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.6 x Blade length 6mm)　MSMHDD0260 MSMHDD0260 2.6mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-11 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.7 x Blade length 6mm)　MSMHDD0270 MSMHDD0270 2.7mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-12 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.8 x Blade length 6mm)　MSMHDD0280 MSMHDD0280 2.8mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-13 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.9 x Blade length 6mm)　MSMHDD0290 MSMHDD0290 2.9mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-14 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.0 × Blade length 8mm)　MSMHDD0300 MSMHDD0300 3.0mm 8.0mm 1piece JPY: 7,090 USD: 44.11

61-1270-15 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.1 × Blade length 8mm)　MSMHDD0310 MSMHDD0310 3.1mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-16 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.2 × Blade length 8mm)　MSMHDD0320 MSMHDD0320 3.2mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-17 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.3 × Blade length 8mm)　MSMHDD0330 MSMHDD0330 3.3mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-18 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.4 × Blade length 8mm)　MSMHDD0340 MSMHDD0340 3.4mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-19 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.5 × Blade length 8mm)　MSMHDD0350 MSMHDD0350 3.5mm 8.0mm 1piece JPY: 8,930 USD: 55.56

61-1270-20 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.6 × Blade length 11mm)　MSMHDD0360 MSMHDD0360 3.6mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-21 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.7 × Blade length 11mm)　MSMHDD0370 MSMHDD0370 3.7mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-22 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.8 × Blade length 11mm)　MSMHDD0380 MSMHDD0380 3.8mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-23 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.9 × Blade length 11mm)　MSMHDD0390 MSMHDD0390 3.9mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-24 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.0 × Blade length 11mm)　MSMHDD0400 MSMHDD0400 4.0mm 11.0mm 1piece JPY: 7,770 USD: 48.35

61-1270-25 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.1 × Blade length 12mm)　MSMHDD0410 MSMHDD0410 4.1mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-26 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.2 × Blade length 12mm)　MSMHDD0420 MSMHDD0420 4.2mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-27 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.3 × Blade length 12mm)　MSMHDD0430 MSMHDD0430 4.3mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-28 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.4 × Blade length 12mm)　MSMHDD0440 MSMHDD0440 4.4mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-29 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.5 × Blade length 12mm)　MSMHDD0450 MSMHDD0450 4.5mm 12.0mm 1piece JPY: 9,530 USD: 59.30

61-1270-30 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.6 × Blade length 13mm)　MSMHDD0460 MSMHDD0460 4.6mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-31 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.7 × Blade length 13mm)　MSMHDD0470 MSMHDD0470 4.7mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-32 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.8 × Blade length 13mm)　MSMHDD0480 MSMHDD0480 4.8mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-33 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.9 × Blade length 13mm)　MSMHDD0490 MSMHDD0490 4.9mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-34 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.0 × Blade length 13mm)　MSMHDD0500 MSMHDD0500 5.0mm 13.0mm 1piece JPY: 8,340 USD: 51.89

61-1270-35 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.1 × Blade length 13mm)　MSMHDD0510 MSMHDD0510 5.1mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-36 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.2 × Blade length 13mm)　MSMHDD0520 MSMHDD0520 5.2mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-37 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.3 × Blade length 13mm)　MSMHDD0530 MSMHDD0530 5.3mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-38 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.4 × Blade length 13mm)　MSMHDD0540 MSMHDD0540 5.4mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-39 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.5 × Blade length 13mm)　MSMHDD0550 MSMHDD0550 5.5mm 13.0mm 1piece JPY: 9,890 USD: 61.54

61-1270-40 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.6 × Blade length 13mm)　MSMHDD0560 MSMHDD0560 5.6mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-41 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.7 × Blade length 13mm)　MSMHDD0570 MSMHDD0570 5.7mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-42 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.8 × Blade length 13mm)　MSMHDD0580 MSMHDD0580 5.8mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-43 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.9 × Blade length 13mm)　MSMHDD0590 MSMHDD0590 5.9mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-44 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.0 × Blade length 13mm)　MSMHDD0600 MSMHDD0600 6.0mm 13.0mm 1piece JPY: 8,620 USD: 53.63

61-1270-45 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650 MSMHDD0650 6.5mm 16.0mm 1piece JPY: 14,100 USD: 87.73

61-1270-46 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ7.0 × Blade length 19mm)　MSMHDD0700 MSMHDD0700 7.0mm 19.0mm 1piece JPY: 13,600 USD: 84.62

61-1270-47 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ7.5 × Blade length 19mm)　MSMHDD0750 MSMHDD0750 7.5mm 19.0mm 1piece JPY: 14,100 USD: 87.73

61-1270-48 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ8.0 × Blade length 19mm)　MSMHDD0800 MSMHDD0800 8.0mm 19.0mm 1piece JPY: 13,600 USD: 84.62

61-1270-49 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ8.5 × Blade length 19mm)　MSMHDD0850 MSMHDD0850 8.5mm 19.0mm 1piece JPY: 16,500 USD: 102.66

61-1270-50 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ9.0 × Blade length 22mm)　MSMHDD0900 MSMHDD0900 9.0mm 22.0mm 1piece JPY: 15,900 USD: 98.93

61-1270-51 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ9.5 × Blade length 22mm)　MSMHDD0950 MSMHDD0950 9.5mm 22.0mm 1piece JPY: 16,500 USD: 102.66

61-1270-52 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ10.0 × Blade length 22mm)　MSMHDD1000 MSMHDD1000 10.0mm 22.0mm 1piece JPY: 15,900 USD: 98.93

61-1270-53 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ11.0 × Blade length 26mm)　MSMHDD1100 MSMHDD1100 11.0mm 26.0mm 1piece JPY: 23,400 USD: 145.60

61-1270-54 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ12 × Blade length 26mm)　MSMHDD1200S10 MSMHDD1200S10 12.0mm 26.0mm 1piece JPY: 23,400 USD: 145.60

61-1270-55 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ12.0 × Blade length 26mm)　MSMHDD1200 MSMHDD1200 12.0mm 26.0mm 1piece JPY: 23,400 USD: 145.60

61-1270-56 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ13 × Blade length 26mm)　MSMHDD1300 MSMHDD1300 13.0mm 26.0mm 1piece JPY: 29,500 USD: 183.55

61-1270-57 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ14.0 × Blade length 30mm)　MSMHDD1400 MSMHDD1400 14.0mm 30.0mm 1piece JPY: 32,300 USD: 200.97

61-1270-58 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ15.0 × Blade length 35mm)　MSMHDD1500 MSMHDD1500 15.0mm 35.0mm 1piece JPY: 41,000 USD: 255.10

61-1270-59 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ16.0 × Blade length 35mm)　MSMHDD1600 MSMHDD1600 16.0mm 35.0mm 1piece JPY: 43,800 USD: 272.52

61-1270-60 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ17 × Blade length 35mm)　MSMHDD1700 MSMHDD1700 17.0mm 35.0mm 1piece JPY: 58,600 USD: 364.61

61-1270-61 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ18.0 × Blade length 40mm)　MSMHDD1800 MSMHDD1800 18.0mm 40.0mm 1piece JPY: 70,200 USD: 436.78

61-1270-62 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ19 × Blade length 40mm)　MSMHDD1900 MSMHDD1900 19.0mm 40.0mm 1piece JPY: 77,300 USD: 480.96

61-1270-63 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ20.0 × Blade length 45mm)　MSMHDD2000 MSMHDD2000 20.0mm 45.0mm 1piece JPY: 73,800 USD: 459.18

61-1270-64 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ22 × Blade length 50mm)　MSMHDD2200 MSMHDD2200 22.0mm 50.0mm 1piece JPY: 88,600 USD: 551.27

61-1270-65 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ25.0 × Blade length 55mm)　MSMHDD2500 MSMHDD2500 25.0mm 55.0mm 1piece JPY: 137,000 USD: 852.41

This page is the page of MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init"> 61-1270-45 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
Mitsubishi Materials Corporation

61-1270-45　MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650

Features

  • 4 blades realized groove cutting. It has the same amount of cut as the conventional 2-blade, and twice the feed speed.
  • Due to the special groove shape, chip discharge is greatly improved and heavy cutting is possible.
  • Work Material: Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel (Austenitic), High Hardness Steel (~55HRC), Heat Resistant Alloy, Copper Alloy.

Spec

  • Blade diameter (mm): 6.5
  • blade length (mm): 16
  • Length (mm): 60
  • Shank diameter (mm): 8
  • Surface treatment: (Al, Ti) N coating (MS)
  • screw square 45 °
  • Center sheet: with
  • pole ultrafine particles Cemented carbide (UWC)
  • Application: workpiece: Carbon steel, alloy steel, Carbon tool steel, Stainless steel (austenitic), hardened steel, Heat resistance alloy.
  • Country of origin: Japan
  • Manufacturer's model number: MSMHDD0650
  • CODE No.: 687-6676
  •  

Package size：12×63×15 mm　40 g　 [About Package size]

Order No. 61-1270-45
Model No. MSMHDD0650
JAN Code 4994196449896
Standard price JPY: 14,100 USD: 87.73
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Blade diameter
 Blade length
 Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
61-1270-04 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.0 × Blade length 4mm)　MSMHDD0200 MSMHDD0200 2.0mm 4.0mm 1piece JPY: 5,990 USD: 37.27

61-1270-05 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.1 x Blade length 5mm)　MSMHDD0210 MSMHDD0210 2.1mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-06 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.2 x Blade length 5mm)　MSMHDD0220 MSMHDD0220 2.2mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-07 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.3 x Blade length 5mm)　MSMHDD0230 MSMHDD0230 2.3mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-08 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.4 x Blade length 5mm)　MSMHDD0240 MSMHDD0240 2.4mm 5.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-09 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.5 x Blade length 5mm)　MSMHDD0250 MSMHDD0250 2.5mm 5.0mm 1piece JPY: 7,180 USD: 44.67

61-1270-10 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.6 x Blade length 6mm)　MSMHDD0260 MSMHDD0260 2.6mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-11 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.7 x Blade length 6mm)　MSMHDD0270 MSMHDD0270 2.7mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-12 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.8 x Blade length 6mm)　MSMHDD0280 MSMHDD0280 2.8mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-13 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ2.9 x Blade length 6mm)　MSMHDD0290 MSMHDD0290 2.9mm 6.0mm 1piece JPY: 10,500 USD: 65.33

61-1270-14 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.0 × Blade length 8mm)　MSMHDD0300 MSMHDD0300 3.0mm 8.0mm 1piece JPY: 7,090 USD: 44.11

61-1270-15 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.1 × Blade length 8mm)　MSMHDD0310 MSMHDD0310 3.1mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-16 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.2 × Blade length 8mm)　MSMHDD0320 MSMHDD0320 3.2mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-17 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.3 × Blade length 8mm)　MSMHDD0330 MSMHDD0330 3.3mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-18 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.4 × Blade length 8mm)　MSMHDD0340 MSMHDD0340 3.4mm 8.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-19 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.5 × Blade length 8mm)　MSMHDD0350 MSMHDD0350 3.5mm 8.0mm 1piece JPY: 8,930 USD: 55.56

61-1270-20 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.6 × Blade length 11mm)　MSMHDD0360 MSMHDD0360 3.6mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-21 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.7 × Blade length 11mm)　MSMHDD0370 MSMHDD0370 3.7mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-22 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.8 × Blade length 11mm)　MSMHDD0380 MSMHDD0380 3.8mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-23 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ3.9 × Blade length 11mm)　MSMHDD0390 MSMHDD0390 3.9mm 11.0mm 1piece JPY: 13,000 USD: 80.89

61-1270-24 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.0 × Blade length 11mm)　MSMHDD0400 MSMHDD0400 4.0mm 11.0mm 1piece JPY: 7,770 USD: 48.35

61-1270-25 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.1 × Blade length 12mm)　MSMHDD0410 MSMHDD0410 4.1mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-26 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.2 × Blade length 12mm)　MSMHDD0420 MSMHDD0420 4.2mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-27 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.3 × Blade length 12mm)　MSMHDD0430 MSMHDD0430 4.3mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-28 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.4 × Blade length 12mm)　MSMHDD0440 MSMHDD0440 4.4mm 12.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-29 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.5 × Blade length 12mm)　MSMHDD0450 MSMHDD0450 4.5mm 12.0mm 1piece JPY: 9,530 USD: 59.30

61-1270-30 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.6 × Blade length 13mm)　MSMHDD0460 MSMHDD0460 4.6mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-31 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.7 × Blade length 13mm)　MSMHDD0470 MSMHDD0470 4.7mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-32 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.8 × Blade length 13mm)　MSMHDD0480 MSMHDD0480 4.8mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-33 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ4.9 × Blade length 13mm)　MSMHDD0490 MSMHDD0490 4.9mm 13.0mm 1piece JPY: 13,800 USD: 85.86

61-1270-34 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.0 × Blade length 13mm)　MSMHDD0500 MSMHDD0500 5.0mm 13.0mm 1piece JPY: 8,340 USD: 51.89

61-1270-35 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.1 × Blade length 13mm)　MSMHDD0510 MSMHDD0510 5.1mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-36 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.2 × Blade length 13mm)　MSMHDD0520 MSMHDD0520 5.2mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-37 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.3 × Blade length 13mm)　MSMHDD0530 MSMHDD0530 5.3mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-38 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.4 × Blade length 13mm)　MSMHDD0540 MSMHDD0540 5.4mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-39 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.5 × Blade length 13mm)　MSMHDD0550 MSMHDD0550 5.5mm 13.0mm 1piece JPY: 9,890 USD: 61.54

61-1270-40 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.6 × Blade length 13mm)　MSMHDD0560 MSMHDD0560 5.6mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-41 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.7 × Blade length 13mm)　MSMHDD0570 MSMHDD0570 5.7mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-42 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.8 × Blade length 13mm)　MSMHDD0580 MSMHDD0580 5.8mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-43 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ5.9 × Blade length 13mm)　MSMHDD0590 MSMHDD0590 5.9mm 13.0mm 1piece JPY: 14,400 USD: 89.60

61-1270-44 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.0 × Blade length 13mm)　MSMHDD0600 MSMHDD0600 6.0mm 13.0mm 1piece JPY: 8,620 USD: 53.63

61-1270-45 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm)　MSMHDD0650 MSMHDD0650 6.5mm 16.0mm 1piece JPY: 14,100 USD: 87.73

61-1270-46 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ7.0 × Blade length 19mm)　MSMHDD0700 MSMHDD0700 7.0mm 19.0mm 1piece JPY: 13,600 USD: 84.62

61-1270-47 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ7.5 × Blade length 19mm)　MSMHDD0750 MSMHDD0750 7.5mm 19.0mm 1piece JPY: 14,100 USD: 87.73

61-1270-48 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ8.0 × Blade length 19mm)　MSMHDD0800 MSMHDD0800 8.0mm 19.0mm 1piece JPY: 13,600 USD: 84.62

61-1270-49 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ8.5 × Blade length 19mm)　MSMHDD0850 MSMHDD0850 8.5mm 19.0mm 1piece JPY: 16,500 USD: 102.66

61-1270-50 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ9.0 × Blade length 22mm)　MSMHDD0900 MSMHDD0900 9.0mm 22.0mm 1piece JPY: 15,900 USD: 98.93

61-1270-51 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ9.5 × Blade length 22mm)　MSMHDD0950 MSMHDD0950 9.5mm 22.0mm 1piece JPY: 16,500 USD: 102.66

61-1270-52 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ10.0 × Blade length 22mm)　MSMHDD1000 MSMHDD1000 10.0mm 22.0mm 1piece JPY: 15,900 USD: 98.93

61-1270-53 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ11.0 × Blade length 26mm)　MSMHDD1100 MSMHDD1100 11.0mm 26.0mm 1piece JPY: 23,400 USD: 145.60

61-1270-54 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ12 × Blade length 26mm)　MSMHDD1200S10 MSMHDD1200S10 12.0mm 26.0mm 1piece JPY: 23,400 USD: 145.60

61-1270-55 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ12.0 × Blade length 26mm)　MSMHDD1200 MSMHDD1200 12.0mm 26.0mm 1piece JPY: 23,400 USD: 145.60

61-1270-56 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ13 × Blade length 26mm)　MSMHDD1300 MSMHDD1300 13.0mm 26.0mm 1piece JPY: 29,500 USD: 183.55

61-1270-57 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ14.0 × Blade length 30mm)　MSMHDD1400 MSMHDD1400 14.0mm 30.0mm 1piece JPY: 32,300 USD: 200.97

61-1270-58 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ15.0 × Blade length 35mm)　MSMHDD1500 MSMHDD1500 15.0mm 35.0mm 1piece JPY: 41,000 USD: 255.10

61-1270-59 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ16.0 × Blade length 35mm)　MSMHDD1600 MSMHDD1600 16.0mm 35.0mm 1piece JPY: 43,800 USD: 272.52

61-1270-60 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ17 × Blade length 35mm)　MSMHDD1700 MSMHDD1700 17.0mm 35.0mm 1piece JPY: 58,600 USD: 364.61

61-1270-61 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ18.0 × Blade length 40mm)　MSMHDD1800 MSMHDD1800 18.0mm 40.0mm 1piece JPY: 70,200 USD: 436.78

61-1270-62 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ19 × Blade length 40mm)　MSMHDD1900 MSMHDD1900 19.0mm 40.0mm 1piece JPY: 77,300 USD: 480.96

61-1270-63 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ20.0 × Blade length 45mm)　MSMHDD2000 MSMHDD2000 20.0mm 45.0mm 1piece JPY: 73,800 USD: 459.18

61-1270-64 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ22 × Blade length 50mm)　MSMHDD2200 MSMHDD2200 22.0mm 50.0mm 1piece JPY: 88,600 USD: 551.27

61-1270-65 MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ25.0 × Blade length 55mm)　MSMHDD2500 MSMHDD2500 25.0mm 55.0mm 1piece JPY: 137,000 USD: 852.41

This page is the page of MSTAR Carbide Endmill (MSMHD, 4 Blades, General Purpose, high helix, Φ6.5 × Blade length 16mm) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.