61-1269-71 MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) MS4JCD0400
Features
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Work Material: Carbon Steel, Alloy Steel, Tool Steel, Pre-Hardened Steel, High Hardness Steel (~55HRC), Austenitic Stainless Steel, Heat Resistant Alloy, Copper Alloy.
Spec
- Blade diameter (mm): 4.0
- blade length (mm): 16
- Length (mm): 50
- Shank diameter (mm): 6
- Surface treatment: (Al, Ti) N coating (MS)
- screw square 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, Carbon tool steel, prehardened steel, Austenitic Stainless steel, Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS4JCD0400
- CODE No.: 672-0633
Package sizePackage sizes="init">
61-1269-71 MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) MS4JCD0400
特徴
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Work Material: Carbon Steel, Alloy Steel, Tool Steel, Pre-Hardened Steel, High Hardness Steel (~55HRC), Austenitic Stainless Steel, Heat Resistant Alloy, Copper Alloy.
仕様
- Blade diameter (mm): 4.0
- blade length (mm): 16
- Length (mm): 50
- Shank diameter (mm): 6
- Surface treatment: (Al, Ti) N coating (MS)
- screw square 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, Carbon tool steel, prehardened steel, Austenitic Stainless steel, Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS4JCD0400
- CODE No.: 672-0633
荷姿サイズ：13×67×12 mm 20 g [荷姿サイズについて]
| アズワン品番 | 61-1269-71 | |
|---|---|---|
| Model No. | MS4JCD0400 | |
| JANコード | 4994196348731 | |
| 標準価格 |
JPY: 4,760
USD: 29.84
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 |
Blade diameter |
Blade length |
入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1269-52 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ1.0 x Blade length 2.5mm) MS4MCD0100 | MS4MCD0100 | 1.0mm | 2.5mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1269-67 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ1.0 × Blade length 4mm) MS4JCD0100 | MS4JCD0100 | 1.0mm | 4.0mm | 1piece | JPY: 6,290 | USD: 39.43 |
|
|
 |
61-1269-53 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ1.5 x Blade length 3.8mm) MS4MCD0150 | MS4MCD0150 | 1.5mm | 3.8mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1269-68 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ1.5 × Blade length 6mm) MS4JCD0150 | MS4JCD0150 | 1.5mm | 6.0mm | 1piece | JPY: 6,290 | USD: 39.43 |
|
|
 |
61-1269-54 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ2.0 x Blade length 5.0mm) MS4MCD0200 | MS4MCD0200 | 2.0mm | 5.0mm | 1piece | JPY: 2,860 | USD: 17.93 |
|
|
 |
61-1269-69 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ2.0 × Blade length 8mm) MS4JCD0200 | MS4JCD0200 | 2.0mm | 8.0mm | 1piece | JPY: 4,190 | USD: 26.27 |
|
|
 |
61-1269-55 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ2.5 x Blade length 6.3mm) MS4MCD0250 | MS4MCD0250 | 2.5mm | 6.3mm | 1piece | JPY: 2,860 | USD: 17.93 |
|
|
 |
61-1269-56 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ3.0 x Blade length 7.5mm) MS4MCD0300 | MS4MCD0300 | 3.0mm | 7.5mm | 1piece | JPY: 2,940 | USD: 18.43 |
|
|
 |
61-1269-70 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ3.0 × Blade length 12mm) MS4JCD0300 | MS4JCD0300 | 3.0mm | 12.0mm | 1piece | JPY: 4,320 | USD: 27.08 |
|
|
 |
61-1269-57 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ4.0 x Blade length 10.0mm) MS4MCD0400 | MS4MCD0400 | 4.0mm | 10.0mm | 1piece | JPY: 3,310 | USD: 20.75 |
|
|
 |
61-1269-71 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) MS4JCD0400 | MS4JCD0400 | 4.0mm | 16.0mm | 1piece | JPY: 4,760 | USD: 29.84 |
|
|
 |
61-1269-58 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ5.0 x Blade length 12.5mm) MS4MCD0500 | MS4MCD0500 | 5.0mm | 12.5mm | 1piece | JPY: 3,370 | USD: 21.13 |
|
|
 |
61-1269-72 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ5.0 × Blade length 20mm) MS4JCD0500 | MS4JCD0500 | 5.0mm | 20.0mm | 1piece | JPY: 4,900 | USD: 30.72 |
|
|
 |
61-1269-59 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ6.0 x Blade length 15.0mm) MS4MCD0600 | MS4MCD0600 | 6.0mm | 15.0mm | 1piece | JPY: 3,600 | USD: 22.57 |
|
|
 |
61-1269-73 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ6.0 × Blade length 24mm) MS4JCD0600 | MS4JCD0600 | 6.0mm | 24.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
 |
61-1269-60 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ8.0 x Blade length 20.0mm) MS4MCD0800 | MS4MCD0800 | 8.0mm | 20.0mm | 1piece | JPY: 7,040 | USD: 44.13 |
|
|
 |
61-1269-74 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ8.0 × Blade length 32mm) MS4JCD0800 | MS4JCD0800 | 8.0mm | 32.0mm | 1piece | JPY: 12,440 | USD: 77.98 |
|
|
 |
61-1269-61 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ10.0 x Blade length 25.0mm) MS4MCD1000 | MS4MCD1000 | 10.0mm | 25.0mm | 1piece | JPY: 9,430 | USD: 59.11 |
|
|
 |
61-1269-75 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ10.0 × Blade length 40mm) MS4JCD1000 | MS4JCD1000 | 10.0mm | 40.0mm | 1piece | JPY: 14,630 | USD: 91.71 |
|
|
 |
61-1269-62 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ12.0 x Blade length 30.0mm) MS4MCD1200 | MS4MCD1200 | 12.0mm | 30.0mm | 1piece | JPY: 11,700 | USD: 73.34 |
|
|
 |
61-1269-76 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ12.0 × Blade length 48mm) MS4JCD1200 | MS4JCD1200 | 12.0mm | 48.0mm | 1piece | JPY: 20,320 | USD: 127.37 |
|
|
 |
61-1269-63 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ14 x Blade length 35mm) MS4MCD1400 | MS4MCD1400 | 14.0mm | 35.0mm | 1piece | JPY: 27,300 | USD: 171.13 |
|
|
 |
61-1269-64 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ16 x Blade length 40mm) MS4MCD1600 | MS4MCD1600 | 16.0mm | 40.0mm | 1piece | JPY: 39,000 | USD: 244.47 |
|
|
 |
61-1269-65 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ18 x Blade length 45mm) MS4MCD1800 | MS4MCD1800 | 18.0mm | 45.0mm | 1piece | JPY: 52,570 | USD: 329.53 |
|
|
 |
61-1269-66 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ20 x Blade length 50mm) MS4MCD2000 | MS4MCD2000 | 20.0mm | 50.0mm | 1piece | JPY: 57,690 | USD: 361.63 |
|
This page is the page of MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.arbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) MS4JCD0400 【AXEL GLOBAL】ASONE
61-1269-71 MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) MS4JCD0400
Features
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Work Material: Carbon Steel, Alloy Steel, Tool Steel, Pre-Hardened Steel, High Hardness Steel (~55HRC), Austenitic Stainless Steel, Heat Resistant Alloy, Copper Alloy.
Spec
- Blade diameter (mm): 4.0
- blade length (mm): 16
- Length (mm): 50
- Shank diameter (mm): 6
- Surface treatment: (Al, Ti) N coating (MS)
- screw square 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, Carbon tool steel, prehardened steel, Austenitic Stainless steel, Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS4JCD0400
- CODE No.: 672-0633
Package size：13×67×12 mm 20 g [About Package size]
| Order No. | 61-1269-71 | |
|---|---|---|
| Model No. | MS4JCD0400 | |
| JAN Code | 4994196348731 | |
| Standard price |
JPY: 4,760
USD: 29.84
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. |
Blade diameter |
Blade length |
Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|---|---|
|
61-1269-52 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ1.0 x Blade length 2.5mm) MS4MCD0100 | MS4MCD0100 | 1.0mm | 2.5mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
|
61-1269-67 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ1.0 × Blade length 4mm) MS4JCD0100 | MS4JCD0100 | 1.0mm | 4.0mm | 1piece | JPY: 6,290 | USD: 39.43 |
|
|
|
61-1269-53 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ1.5 x Blade length 3.8mm) MS4MCD0150 | MS4MCD0150 | 1.5mm | 3.8mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
|
61-1269-68 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ1.5 × Blade length 6mm) MS4JCD0150 | MS4JCD0150 | 1.5mm | 6.0mm | 1piece | JPY: 6,290 | USD: 39.43 |
|
|
|
61-1269-54 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ2.0 x Blade length 5.0mm) MS4MCD0200 | MS4MCD0200 | 2.0mm | 5.0mm | 1piece | JPY: 2,860 | USD: 17.93 |
|
|
|
61-1269-69 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ2.0 × Blade length 8mm) MS4JCD0200 | MS4JCD0200 | 2.0mm | 8.0mm | 1piece | JPY: 4,190 | USD: 26.27 |
|
|
|
61-1269-55 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ2.5 x Blade length 6.3mm) MS4MCD0250 | MS4MCD0250 | 2.5mm | 6.3mm | 1piece | JPY: 2,860 | USD: 17.93 |
|
|
|
61-1269-56 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ3.0 x Blade length 7.5mm) MS4MCD0300 | MS4MCD0300 | 3.0mm | 7.5mm | 1piece | JPY: 2,940 | USD: 18.43 |
|
|
|
61-1269-70 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ3.0 × Blade length 12mm) MS4JCD0300 | MS4JCD0300 | 3.0mm | 12.0mm | 1piece | JPY: 4,320 | USD: 27.08 |
|
|
|
61-1269-57 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ4.0 x Blade length 10.0mm) MS4MCD0400 | MS4MCD0400 | 4.0mm | 10.0mm | 1piece | JPY: 3,310 | USD: 20.75 |
|
|
|
61-1269-71 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ4.0 × Blade length 16mm) MS4JCD0400 | MS4JCD0400 | 4.0mm | 16.0mm | 1piece | JPY: 4,760 | USD: 29.84 |
|
|
|
61-1269-58 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ5.0 x Blade length 12.5mm) MS4MCD0500 | MS4MCD0500 | 5.0mm | 12.5mm | 1piece | JPY: 3,370 | USD: 21.13 |
|
|
|
61-1269-72 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ5.0 × Blade length 20mm) MS4JCD0500 | MS4JCD0500 | 5.0mm | 20.0mm | 1piece | JPY: 4,900 | USD: 30.72 |
|
|
|
61-1269-59 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ6.0 x Blade length 15.0mm) MS4MCD0600 | MS4MCD0600 | 6.0mm | 15.0mm | 1piece | JPY: 3,600 | USD: 22.57 |
|
|
|
61-1269-73 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ6.0 × Blade length 24mm) MS4JCD0600 | MS4JCD0600 | 6.0mm | 24.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
|
61-1269-60 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ8.0 x Blade length 20.0mm) MS4MCD0800 | MS4MCD0800 | 8.0mm | 20.0mm | 1piece | JPY: 7,040 | USD: 44.13 |
|
|
|
61-1269-74 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ8.0 × Blade length 32mm) MS4JCD0800 | MS4JCD0800 | 8.0mm | 32.0mm | 1piece | JPY: 12,440 | USD: 77.98 |
|
|
|
61-1269-61 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ10.0 x Blade length 25.0mm) MS4MCD1000 | MS4MCD1000 | 10.0mm | 25.0mm | 1piece | JPY: 9,430 | USD: 59.11 |
|
|
|
61-1269-75 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ10.0 × Blade length 40mm) MS4JCD1000 | MS4JCD1000 | 10.0mm | 40.0mm | 1piece | JPY: 14,630 | USD: 91.71 |
|
|
|
61-1269-62 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ12.0 x Blade length 30.0mm) MS4MCD1200 | MS4MCD1200 | 12.0mm | 30.0mm | 1piece | JPY: 11,700 | USD: 73.34 |
|
|
|
61-1269-76 | MSTAR Carbide Endmill (4 Blades, MS4JC, Φ12.0 × Blade length 48mm) MS4JCD1200 | MS4JCD1200 | 12.0mm | 48.0mm | 1piece | JPY: 20,320 | USD: 127.37 |
|
|
|
61-1269-63 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ14 x Blade length 35mm) MS4MCD1400 | MS4MCD1400 | 14.0mm | 35.0mm | 1piece | JPY: 27,300 | USD: 171.13 |
|
|
|
61-1269-64 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ16 x Blade length 40mm) MS4MCD1600 | MS4MCD1600 | 16.0mm | 40.0mm | 1piece | JPY: 39,000 | USD: 244.47 |
|
|
|
61-1269-65 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ18 x Blade length 45mm) MS4MCD1800 | MS4MCD1800 | 18.0mm | 45.0mm | 1piece | JPY: 52,570 | USD: 329.53 |
|
|
|
61-1269-66 | MSTAR Carbide Endmill (4 Blades, Medium Blade length, MS4MC, Φ20 x Blade length 50mm) MS4MCD2000 | MS4MCD2000 | 20.0mm | 50.0mm | 1piece | JPY: 57,690 | USD: 361.63 |
|