61-1258-77 [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
FeaturesFeatures class="init">
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300 61-1258-77 【AXEL GLOBAL】 アズワン
Contact us
Mitsubishi Materials Corporation
61-1258-77 [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
特徴
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
Spec
- Blade diameter (mm): 13.0
- blade length (mm): 26.0
- Length (mm): 75
- Shank diameter (mm): 12
- Non Coating
- screw square 30 °
- pin Kado Type
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: General steel prehardened steel, Casting, aluminum alloy, Titanium alloy, Heat resistance alloy, copper alloy.
- Country of origin: Japan
- Manufacturer's model number: C2MSD1300
- CODE No.: 115-2432
-
Order No.
61-1258-77
Model No.
C2MSD1300
JAN Code
4994196392062
Standard price
JPY: 21,369
USD: 134.04
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
-
Product VariationsProduct Variations">
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300 61-1258-77 【AXEL GLOBAL】 アズワン
Contact us
Mitsubishi Materials Corporation
61-1258-77 [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
特徴
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
仕様
- Blade diameter (mm): 13.0
- blade length (mm): 26.0
- Length (mm): 75
- Shank diameter (mm): 12
- Non Coating
- screw square 30 °
- pin Kado Type
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: General steel prehardened steel, Casting, aluminum alloy, Titanium alloy, Heat resistance alloy, copper alloy.
- Country of origin: Japan
- Manufacturer's model number: C2MSD1300
- CODE No.: 115-2432
-
アズワン品番
61-1258-77
型番
C2MSD1300
JANコード
4994196392062
標準価格
JPY: 21,369
USD: 134.04
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
-
商品のバリエーション (サイズ違い・スペック違い・オプション品など)
Product image
Order No.
Name
Model No.
Blade diameter
Blade length
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]

61-1258-46
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.0 x Blade Length: 2.5mm) C2MSD0100
C2MSD0100
1.0mm
2.5mm
1piece
JPY: 4,290
USD: 26.91
-

61-1258-47
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.1 x Blade Length: 2.5mm) C2MSD0110
C2MSD0110
1.1mm
2.5mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-49
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.4 x Blade Length: 3mm) C2MSD0140
C2MSD0140
1.4mm
3.0mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-50
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.5 x Blade Length: 4.0mm) C2MSD0150
C2MSD0150
1.5mm
4.0mm
1piece
JPY: 4,290
USD: 26.91
-

61-1258-51
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.7 x Blade Length: 4mm) C2MSD0170
C2MSD0170
1.7mm
4.0mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-52
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.8 x Blade Length: 5mm) C2MSD0180
C2MSD0180
1.8mm
5.0mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-53
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ2.0 x Blade Length: 6.0mm) C2MSD0200
C2MSD0200
2.0mm
6.0mm
1piece
JPY: 4,290
USD: 26.91
-

61-1258-57
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ3.7 x Blade Length: 10mm) C2MSD0370
C2MSD0370
3.7mm
10.0mm
1piece
JPY: 5,883
USD: 36.90
-

61-1258-58
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ3.8 x Blade Length: 11mm) C2MSD0380
C2MSD0380
3.8mm
11.0mm
1piece
JPY: 5,883
USD: 36.90
-

61-1258-59
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ4.0 x Blade Length: 11.0mm) C2MSD0400
C2MSD0400
4.0mm
11.0mm
1piece
JPY: 5,883
USD: 36.90
-

61-1258-61
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.0 x Blade Length: 13.0mm) C2MSD0500
C2MSD0500
5.0mm
13.0mm
1piece
JPY: 6,493
USD: 40.73
-

61-1258-62
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.5 x Blade Length: 13.0mm) C2MSD0550
C2MSD0550
5.5mm
13.0mm
1piece
JPY: 7,061
USD: 44.29
-

61-1258-63
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.8 x Blade Length: 13mm) C2MSD0580
C2MSD0580
5.8mm
13.0mm
1piece
JPY: 7,061
USD: 44.29
-

61-1258-64
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.0 x Blade Length: 13.0mm) C2MSD0600
C2MSD0600
6.0mm
13.0mm
1piece
JPY: 6,769
USD: 42.46
-

61-1258-65
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.3 x Blade Length: 16mm) C2MSD0630
C2MSD0630
6.3mm
16.0mm
1piece
JPY: 8,694
USD: 54.54
-

61-1258-66
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.5 x Blade Length: 16.0mm) C2MSD0650
C2MSD0650
6.5mm
16.0mm
1piece
JPY: 8,694
USD: 54.54
-

61-1258-67
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ7.0 x Blade Length: 16.0mm) C2MSD0700
C2MSD0700
7.0mm
16.0mm
1piece
JPY: 8,694
USD: 54.54
-

61-1258-68
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ7.3 x Blade Length: 16mm) C2MSD0730
C2MSD0730
7.3mm
16.0mm
1piece
JPY: 9,588
USD: 60.14
-

61-1258-70
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ8.0 x Blade Length: 19.0mm) C2MSD0800
C2MSD0800
8.0mm
19.0mm
1piece
JPY: 9,588
USD: 60.14
-

61-1258-72
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ9.0 x Blade Length: 19.0mm) C2MSD0900
C2MSD0900
9.0mm
19.0mm
1piece
JPY: 11,863
USD: 74.41
-

61-1258-74
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ10.0 x Blade Length: 22.0mm) C2MSD1000
C2MSD1000
10.0mm
22.0mm
1piece
JPY: 11,863
USD: 74.41
-

61-1258-75
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ11.0 x Blade Length: 22.0mm) C2MSD1100
C2MSD1100
11.0mm
22.0mm
1piece
JPY: 15,763
USD: 98.88
-

61-1258-76
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ12.0 x Blade Length: 26.0mm) C2MSD1200
C2MSD1200
12.0mm
26.0mm
1piece
JPY: 16,413
USD: 102.95
-

61-1258-77
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
C2MSD1300
13.0mm
26.0mm
1piece
JPY: 21,369
USD: 134.04
-

61-1258-78
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ14.0 x Blade Length: 26.0mm) C2MSD1400
C2MSD1400
14.0mm
26.0mm
1piece
JPY: 22,831
USD: 143.21
-

61-1258-80
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ16 x Blade Length: 32mm) C2MSD1600
C2MSD1600
16.0mm
32.0mm
1piece
JPY: 30,713
USD: 192.66
-

61-1258-81
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ20 x Blade Length: 38mm) C2MSD2000
C2MSD2000
20.0mm
38.0mm
1piece
JPY: 52,325
USD: 328.22
-
61-1258-77 [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
特徴
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
Spec
- Blade diameter (mm): 13.0
- blade length (mm): 26.0
- Length (mm): 75
- Shank diameter (mm): 12
- Non Coating
- screw square 30 °
- pin Kado Type
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: General steel prehardened steel, Casting, aluminum alloy, Titanium alloy, Heat resistance alloy, copper alloy.
- Country of origin: Japan
- Manufacturer's model number: C2MSD1300
- CODE No.: 115-2432
| Order No. | 61-1258-77 | |
|---|---|---|
| Model No. | C2MSD1300 | |
| JAN Code | 4994196392062 | |
| Standard price |
JPY: 21,369
USD: 134.04
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
|
||
| Stock in Japan | - | |
Product VariationsProduct Variations">
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300 61-1258-77 【AXEL GLOBAL】 アズワン
Contact us
Mitsubishi Materials Corporation
61-1258-77 [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
特徴
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
仕様
- Blade diameter (mm): 13.0
- blade length (mm): 26.0
- Length (mm): 75
- Shank diameter (mm): 12
- Non Coating
- screw square 30 °
- pin Kado Type
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: General steel prehardened steel, Casting, aluminum alloy, Titanium alloy, Heat resistance alloy, copper alloy.
- Country of origin: Japan
- Manufacturer's model number: C2MSD1300
- CODE No.: 115-2432
-
アズワン品番
61-1258-77
型番
C2MSD1300
JANコード
4994196392062
標準価格
JPY: 21,369
USD: 134.04
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
-
商品のバリエーション (サイズ違い・スペック違い・オプション品など)
Product image
Order No.
Name
Model No.
Blade diameter
Blade length
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]

61-1258-46
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.0 x Blade Length: 2.5mm) C2MSD0100
C2MSD0100
1.0mm
2.5mm
1piece
JPY: 4,290
USD: 26.91
-

61-1258-47
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.1 x Blade Length: 2.5mm) C2MSD0110
C2MSD0110
1.1mm
2.5mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-49
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.4 x Blade Length: 3mm) C2MSD0140
C2MSD0140
1.4mm
3.0mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-50
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.5 x Blade Length: 4.0mm) C2MSD0150
C2MSD0150
1.5mm
4.0mm
1piece
JPY: 4,290
USD: 26.91
-

61-1258-51
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.7 x Blade Length: 4mm) C2MSD0170
C2MSD0170
1.7mm
4.0mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-52
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.8 x Blade Length: 5mm) C2MSD0180
C2MSD0180
1.8mm
5.0mm
1piece
JPY: 4,810
USD: 30.17
-

61-1258-53
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ2.0 x Blade Length: 6.0mm) C2MSD0200
C2MSD0200
2.0mm
6.0mm
1piece
JPY: 4,290
USD: 26.91
-

61-1258-57
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ3.7 x Blade Length: 10mm) C2MSD0370
C2MSD0370
3.7mm
10.0mm
1piece
JPY: 5,883
USD: 36.90
-

61-1258-58
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ3.8 x Blade Length: 11mm) C2MSD0380
C2MSD0380
3.8mm
11.0mm
1piece
JPY: 5,883
USD: 36.90
-

61-1258-59
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ4.0 x Blade Length: 11.0mm) C2MSD0400
C2MSD0400
4.0mm
11.0mm
1piece
JPY: 5,883
USD: 36.90
-

61-1258-61
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.0 x Blade Length: 13.0mm) C2MSD0500
C2MSD0500
5.0mm
13.0mm
1piece
JPY: 6,493
USD: 40.73
-

61-1258-62
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.5 x Blade Length: 13.0mm) C2MSD0550
C2MSD0550
5.5mm
13.0mm
1piece
JPY: 7,061
USD: 44.29
-

61-1258-63
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.8 x Blade Length: 13mm) C2MSD0580
C2MSD0580
5.8mm
13.0mm
1piece
JPY: 7,061
USD: 44.29
-

61-1258-64
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.0 x Blade Length: 13.0mm) C2MSD0600
C2MSD0600
6.0mm
13.0mm
1piece
JPY: 6,769
USD: 42.46
-

61-1258-65
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.3 x Blade Length: 16mm) C2MSD0630
C2MSD0630
6.3mm
16.0mm
1piece
JPY: 8,694
USD: 54.54
-

61-1258-66
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.5 x Blade Length: 16.0mm) C2MSD0650
C2MSD0650
6.5mm
16.0mm
1piece
JPY: 8,694
USD: 54.54
-

61-1258-67
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ7.0 x Blade Length: 16.0mm) C2MSD0700
C2MSD0700
7.0mm
16.0mm
1piece
JPY: 8,694
USD: 54.54
-

61-1258-68
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ7.3 x Blade Length: 16mm) C2MSD0730
C2MSD0730
7.3mm
16.0mm
1piece
JPY: 9,588
USD: 60.14
-

61-1258-70
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ8.0 x Blade Length: 19.0mm) C2MSD0800
C2MSD0800
8.0mm
19.0mm
1piece
JPY: 9,588
USD: 60.14
-

61-1258-72
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ9.0 x Blade Length: 19.0mm) C2MSD0900
C2MSD0900
9.0mm
19.0mm
1piece
JPY: 11,863
USD: 74.41
-

61-1258-74
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ10.0 x Blade Length: 22.0mm) C2MSD1000
C2MSD1000
10.0mm
22.0mm
1piece
JPY: 11,863
USD: 74.41
-

61-1258-75
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ11.0 x Blade Length: 22.0mm) C2MSD1100
C2MSD1100
11.0mm
22.0mm
1piece
JPY: 15,763
USD: 98.88
-

61-1258-76
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ12.0 x Blade Length: 26.0mm) C2MSD1200
C2MSD1200
12.0mm
26.0mm
1piece
JPY: 16,413
USD: 102.95
-

61-1258-77
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
C2MSD1300
13.0mm
26.0mm
1piece
JPY: 21,369
USD: 134.04
-

61-1258-78
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ14.0 x Blade Length: 26.0mm) C2MSD1400
C2MSD1400
14.0mm
26.0mm
1piece
JPY: 22,831
USD: 143.21
-

61-1258-80
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ16 x Blade Length: 32mm) C2MSD1600
C2MSD1600
16.0mm
32.0mm
1piece
JPY: 30,713
USD: 192.66
-

61-1258-81
[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ20 x Blade Length: 38mm) C2MSD2000
C2MSD2000
20.0mm
38.0mm
1piece
JPY: 52,325
USD: 328.22
-
61-1258-77 [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300
特徴
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
仕様
- Blade diameter (mm): 13.0
- blade length (mm): 26.0
- Length (mm): 75
- Shank diameter (mm): 12
- Non Coating
- screw square 30 °
- pin Kado Type
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: General steel prehardened steel, Casting, aluminum alloy, Titanium alloy, Heat resistance alloy, copper alloy.
- Country of origin: Japan
- Manufacturer's model number: C2MSD1300
- CODE No.: 115-2432
| アズワン品番 | 61-1258-77 | |
|---|---|---|
| 型番 | C2MSD1300 | |
| JANコード | 4994196392062 | |
| 標準価格 |
JPY: 21,369
USD: 134.04
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
|
|
||
| 在庫数 | - | |
商品のバリエーション (サイズ違い・スペック違い・オプション品など)
| Product image | Order No. | Name | Model No. |
Blade diameter |
Blade length |
入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|---|---|
![]() |
61-1258-46 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.0 x Blade Length: 2.5mm) C2MSD0100 | C2MSD0100 | 1.0mm | 2.5mm | 1piece | JPY: 4,290 | USD: 26.91 |
-
|
|
![]() |
61-1258-47 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.1 x Blade Length: 2.5mm) C2MSD0110 | C2MSD0110 | 1.1mm | 2.5mm | 1piece | JPY: 4,810 | USD: 30.17 |
-
|
|
![]() |
61-1258-49 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.4 x Blade Length: 3mm) C2MSD0140 | C2MSD0140 | 1.4mm | 3.0mm | 1piece | JPY: 4,810 | USD: 30.17 |
-
|
|
![]() |
61-1258-50 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.5 x Blade Length: 4.0mm) C2MSD0150 | C2MSD0150 | 1.5mm | 4.0mm | 1piece | JPY: 4,290 | USD: 26.91 |
-
|
|
![]() |
61-1258-51 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.7 x Blade Length: 4mm) C2MSD0170 | C2MSD0170 | 1.7mm | 4.0mm | 1piece | JPY: 4,810 | USD: 30.17 |
-
|
|
![]() |
61-1258-52 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ1.8 x Blade Length: 5mm) C2MSD0180 | C2MSD0180 | 1.8mm | 5.0mm | 1piece | JPY: 4,810 | USD: 30.17 |
-
|
|
![]() |
61-1258-53 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ2.0 x Blade Length: 6.0mm) C2MSD0200 | C2MSD0200 | 2.0mm | 6.0mm | 1piece | JPY: 4,290 | USD: 26.91 |
-
|
|
![]() |
61-1258-57 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ3.7 x Blade Length: 10mm) C2MSD0370 | C2MSD0370 | 3.7mm | 10.0mm | 1piece | JPY: 5,883 | USD: 36.90 |
-
|
|
![]() |
61-1258-58 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ3.8 x Blade Length: 11mm) C2MSD0380 | C2MSD0380 | 3.8mm | 11.0mm | 1piece | JPY: 5,883 | USD: 36.90 |
-
|
|
![]() |
61-1258-59 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ4.0 x Blade Length: 11.0mm) C2MSD0400 | C2MSD0400 | 4.0mm | 11.0mm | 1piece | JPY: 5,883 | USD: 36.90 |
-
|
|
![]() |
61-1258-61 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.0 x Blade Length: 13.0mm) C2MSD0500 | C2MSD0500 | 5.0mm | 13.0mm | 1piece | JPY: 6,493 | USD: 40.73 |
-
|
|
![]() |
61-1258-62 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.5 x Blade Length: 13.0mm) C2MSD0550 | C2MSD0550 | 5.5mm | 13.0mm | 1piece | JPY: 7,061 | USD: 44.29 |
-
|
|
![]() |
61-1258-63 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ5.8 x Blade Length: 13mm) C2MSD0580 | C2MSD0580 | 5.8mm | 13.0mm | 1piece | JPY: 7,061 | USD: 44.29 |
-
|
|
![]() |
61-1258-64 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.0 x Blade Length: 13.0mm) C2MSD0600 | C2MSD0600 | 6.0mm | 13.0mm | 1piece | JPY: 6,769 | USD: 42.46 |
-
|
|
![]() |
61-1258-65 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.3 x Blade Length: 16mm) C2MSD0630 | C2MSD0630 | 6.3mm | 16.0mm | 1piece | JPY: 8,694 | USD: 54.54 |
-
|
|
![]() |
61-1258-66 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ6.5 x Blade Length: 16.0mm) C2MSD0650 | C2MSD0650 | 6.5mm | 16.0mm | 1piece | JPY: 8,694 | USD: 54.54 |
-
|
|
![]() |
61-1258-67 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ7.0 x Blade Length: 16.0mm) C2MSD0700 | C2MSD0700 | 7.0mm | 16.0mm | 1piece | JPY: 8,694 | USD: 54.54 |
-
|
|
![]() |
61-1258-68 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ7.3 x Blade Length: 16mm) C2MSD0730 | C2MSD0730 | 7.3mm | 16.0mm | 1piece | JPY: 9,588 | USD: 60.14 |
-
|
|
![]() |
61-1258-70 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ8.0 x Blade Length: 19.0mm) C2MSD0800 | C2MSD0800 | 8.0mm | 19.0mm | 1piece | JPY: 9,588 | USD: 60.14 |
-
|
|
![]() |
61-1258-72 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ9.0 x Blade Length: 19.0mm) C2MSD0900 | C2MSD0900 | 9.0mm | 19.0mm | 1piece | JPY: 11,863 | USD: 74.41 |
-
|
|
![]() |
61-1258-74 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ10.0 x Blade Length: 22.0mm) C2MSD1000 | C2MSD1000 | 10.0mm | 22.0mm | 1piece | JPY: 11,863 | USD: 74.41 |
-
|
|
![]() |
61-1258-75 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ11.0 x Blade Length: 22.0mm) C2MSD1100 | C2MSD1100 | 11.0mm | 22.0mm | 1piece | JPY: 15,763 | USD: 98.88 |
-
|
|
![]() |
61-1258-76 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ12.0 x Blade Length: 26.0mm) C2MSD1200 | C2MSD1200 | 12.0mm | 26.0mm | 1piece | JPY: 16,413 | USD: 102.95 |
-
|
|
![]() |
61-1258-77 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300 | C2MSD1300 | 13.0mm | 26.0mm | 1piece | JPY: 21,369 | USD: 134.04 |
-
|
|
![]() |
61-1258-78 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ14.0 x Blade Length: 26.0mm) C2MSD1400 | C2MSD1400 | 14.0mm | 26.0mm | 1piece | JPY: 22,831 | USD: 143.21 |
-
|
|
![]() |
61-1258-80 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ16 x Blade Length: 32mm) C2MSD1600 | C2MSD1600 | 16.0mm | 32.0mm | 1piece | JPY: 30,713 | USD: 192.66 |
-
|
|
![]() |
61-1258-81 | [Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ20 x Blade Length: 38mm) C2MSD2000 | C2MSD2000 | 20.0mm | 38.0mm | 1piece | JPY: 52,325 | USD: 328.22 |
-
|
![[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300](https://aimg.as-1.co.jp/c/61/1258/77/61125877s.jpg?v=897ccfaa5270bed4dad0662a8ca3207d7ee0ddc44)
![[Discontinued]Carbide Endmill (Medium, 2 Blades, Non-coated, C2 MS, Φ13.0 x Blade Length: 26.0mm) C2MSD1300](https://aimg.as-1.co.jp/c/61/1258/77/61125877as.jpg?v=897ccfaa5270bed4dad0662a8ca3207d7ee0ddc44)