61-0101-74 Portable O2 and H2S Monitor MD-612E
Features
- It is a measuring instrument for measuring oxygen concentration to prevent acid loss accident and hydrogen sulfide concentration in air to prevent poisoning accident. In addition, hydrogen sulfide generated by sludge and organic matter decay and hydrogen sulfide generated by volcanoes and hot spring sites is detected in sewers, human waste treatment, pulp mills, and cleaning plants, and an alarm is sent out to notify of the danger. In addition, it also detects the oxygen concentration at the same time to signal the danger of acid shortage.
- 1. EX Explosion-Proof Passed Product (Exia II CT4X TC No. 19531)
- 2. Japan Maritime Association (NK) Type Test Passed Product
- 3. A loud alarm (90dB or more/10 cm) is used to signal a gas alarm or trouble.
- 4. The bright LED indicator flashes to indicate that the unit is operating (green), when an alarm is issued (red), or has failed (orange).
- 5. The screen is easy to see now using a large LCD display.
- 6. The response time is faster because the suction force of the pump is strong.
- 7. When the power is ON, the battery capacity display and sensor check are fully automatic.
- 8. Digital display of various messages such as intensity display, battery change, sensor malfunction, etc. and lighting function.
- 9. Peak hold function is provided.
- 10. Remote measurement possible * Optionally, a gas sampling pipe with a floating-type collector of 5 m to 30 m and a gas sampling pipe with a probe of 2.4 m can be used (Standard accessory: Gas sampling pipe with a floating-type collector of 5 m)
Spec
- Gas sampling method: Suction type (about 0.6L/min sampling hose 5m loaded)
- Measurement target gas: Oxygen (O2)/Hydrogen sulfide (H2S)
- Measurement principle: Oxygen (O2)/Galvanic battery type, Hydrogen sulfide (H2S)/controlled-potential electrolysis type
- Measurement range: Oxygen (O2)/0.0 - 50.0vol%, Hydrogen sulfide (H2S)/0.0 - 50.0ppm
- Minimum display digit: Oxygen (O2)/0.1vol%, Hydrogen sulfide (H2S)/0.1ppm
- Indication accuracy: Oxygen (O2)/0.0 - 25.0vol%: ±0.5vol% 25.1vol% or more: ±3.0vol%, Hydrogen sulfide (H2S)/0 - 30.0ppm: ±1.5ppm, 30.1ppm or more: ±3.0ppm
- Concentration display: Liquid crystal, digital
- Alarm method: LED lamp, LCD display, Buzzer
- Alarm settings: O2: 18.0vol% H2S: ALM1 10.0ppm, ALM2 20.0ppm
- Explosion-protection: ExiaIICT4X (No. TC19531)
- Response time: O2: 90% response, 15 seconds or less H2S: 90% response, 25 seconds or less (sampling gas suction inlet, at 20℃)
- Operation pressure range: 80 - 110kPa
- Power supply: AA alkaline dry cell (LR6) 3 pieces
- Continuous use time: Approx 16 hours (with no alarm)
- Operating temperature range: - 10 - 40℃ (Humidity: 30 - 85%RH, Non-condensing)
- Dimensions: 78 (W) x 200 (H) x 50 (D) mm
- Body mass: Approximately 550g (including cell)
- Accessories: Sampling hose with float (5m), Leather Case, Carrying case
| Order No. | 61-0101-74 | |
|---|---|---|
| Model No. | MD-612E | |
| Standard price |
JPY: 240,000
USD: 1,504.42
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. |
Attached certificate |
Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|---|
 |
61-9735-07 | Portable O2 And H2S Monitor <With Certificate Of Test> MD-612E | MD-612E | Test result report | 1set | JPY: 248,000 | USD: 1,554.57 |
|
|
 |
61-9735-06 | Portable O2 And H2S Monitor <With Traceability Certificate, Certificate Of Test, Traceability System Diagram> MD-612E | MD-612E | Test result report,Traceability certificate,Traceability system diagram | 1set | JPY: 250,000 | USD: 1,567.10 |
|
|
 |
61-0101-74 | Portable O2 and H2S Monitor MD-612E | MD-612E | 1piece | JPY: 240,000 | USD: 1,504.42 |
|