Spec

• Connected Devices: IR-CZ, IR-SA, IR-CA Series Radiation Thermometers
• Radiation Thermometer Connection: Communication RS-485
• Functions: Temperature display, parameter setting and parameter transmission to radiation thermometer, temperature alarm judgment, signal modulation processing, analog temperature signal transmission
• Number of units that can be connected: 1
• Setting parameters: Emissivity (ratio) 1.999 ~ 0.050 for radiation thermometer parameter transmission, signal modulation mode, signal modulation time constant and decay rate, analog output scaling
• Thermometer information: temperature value, self-diagnostic information
• Signal modulation: [DELAY] primary delay (Modulation time constant ...0.0 ~ 99.9 s, 0.1 s steps or 0.00 ~ 9.99 s, 0.01 s steps optional) modulation time constant 0=REAL [PEAK] maximum trace attenuation ... 0.1~10.0oC/s, 0.1 s step optional setting when IR-CZ/IR-CA is connected, select from 0, 2, 5 and 10.0oC/s when IR-SA is connected
• displaying: temperature, event status
• Analog output: Output 1...IR-GZA processed output, 4 ~ 20 mA DC [allowable load resistance] 600 Ω or less [update cycle] 0.1 s [accuracy] ±0.3% of output range Output 2... Direct output of radiation thermometer (depending on the specifications of the connected radiation thermometer)
• Event Output: [Points] 2 points Select 2 from Upper Limit, Upper Limit, Lower Limit, Lower Limit Temperature Warning and Thermometer Self-Diagnosis Warning Relay a Contact Output (Common) Contact Capacity 240 V AC 1.5 A, 30 V DC 1.5 A
• Terminal Size: M3
• Mounting method: Panel embedded mounting
• Power Consumption: [100V AC] up to 28VA, [240V AC] up to 36VA
• Upper Communication Interface: RS-485
• Size: 96 x 73 x 96 mm
• Weight: Approximately 0.5 kg
•