Features

Compact and lightweight type with a sleeve outer diameter of 9.5 mm.
With a "tube fitter," even smoother piping is possible.
Compact sleeve with outer diameter of 9.5 mm despite having a valve in the socket.
Plug and socket connection is one-touch connection.
Space-saving design suitable for piping work in limited space.
The body is made of plated brass and has excellent corrosion resistance.
*Fluid flows out from the plug side piping when the socket and plug are separated.

Spec

Plug
PC Type (With "Tube Fitter")
Matching Tube Size (mm): Outer Diameter φ6
Mass (g): 5.0
Dimensions (L) (mm): (25)
Dimension (C) (mm): 9.2
Dimension (φT) (mm): 9.8
Dimension (φB) (mm): 2.5
Maximum working pressure: 1.0 MPa{10kgf/cm2}
Valve structure: One-way switching type
Applicable Fluid: Air
Body Material
Coupler: Brass (Plated)
"Tube Fitter" Part: Brass (Plated) and Resin
Mounting Size *
Polyurethane Tube: Outer Diameter φ6±0.1
Polyamide Tube: Outer Diameter φ6 (-0.08~+0.05)
Fluororesin Tube: Outer Diameter φ6±0.07
*When connecting ultra-soft tubes such as soft polyurethane or soft nylon, be sure to use the insert ring specified by the tube manufacturer for the inside diameter of the connecting tube.
Withstand Pressure: 1.5 MPa{15kgf/cm2}
Seal Material: Nitrile Rubber (NBR)
Standard Material
Valve Material: Resin
Operating temperature range *: -20 to +80°C
*The available temperature range depends on the operating conditions.
Compatibility: Sockets and plugs can be connected regardless of mounting configuration.
Minimum cross-sectional area: 4.9 mm2
Suitability for vacuum applications: 53.0 kPa{400mmHg}
Single socket: -
Plug alone: -
When connected: Available