60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
FeaturesFeatures class="init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
-
Order No.Order No.ss="init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
-
アズワン品番
60-1349-43
Model No.
BU38-200X15KPA
Standard price
JPY: 203,000
USD: 1,263.07
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockSupplier Stock"init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
-
アズワン品番
60-1349-43
型番
BU38-200X15KPA
標準価格
JPY: 203,000
USD: 1,263.07
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1349-40
Contact Pressure Gauge (JM31-233 x 5KPA) BU38-200X5KPA
BU38-200X5KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-41
Pressure Gauge with Electrical Contact (JM31-233 x 7KPA) BU38-200X7KPA
BU38-200X7KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-42
Pressure Gauge with Electrical Contact (JM31-233 x 10KPA) BU38-200X10KPA
BU38-200X10KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-43
Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
BU38-200X15KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-44
Contact Pressure Gauge (JM31-233 x 20KPA) BU38-200X20KPA
BU38-200X20KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-45
Contact Pressure Gauge (JM31-233 x 30KPA) BU38-200X30KPA
BU38-200X30KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-46
Pressure Gauge with Electrical Contact (JM31-233 x 50KPA) BU38-200X50KPA
BU38-200X50KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
-
Order No.Order No.ss="init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
-
アズワン品番
60-1349-43
Model No.
BU38-200X15KPA
Standard price
JPY: 203,000
USD: 1,263.07
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockSupplier Stock"init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
-
アズワン品番
60-1349-43
型番
BU38-200X15KPA
標準価格
JPY: 203,000
USD: 1,263.07
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1349-40
Contact Pressure Gauge (JM31-233 x 5KPA) BU38-200X5KPA
BU38-200X5KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-41
Pressure Gauge with Electrical Contact (JM31-233 x 7KPA) BU38-200X7KPA
BU38-200X7KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-42
Pressure Gauge with Electrical Contact (JM31-233 x 10KPA) BU38-200X10KPA
BU38-200X10KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-43
Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
BU38-200X15KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-44
Contact Pressure Gauge (JM31-233 x 20KPA) BU38-200X20KPA
BU38-200X20KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-45
Contact Pressure Gauge (JM31-233 x 30KPA) BU38-200X30KPA
BU38-200X30KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-46
Pressure Gauge with Electrical Contact (JM31-233 x 50KPA) BU38-200X50KPA
BU38-200X50KPA
1piece
JPY: 203,000
USD: 1,263.07
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA
特徴
- A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
- At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
- Pressure can also be checked at the measurement site.
- Since the switching current is large, it is suitable for direct control of equipment.
- Since the elements are independent for indication and contact, the indication after switching is also accurate.
- Microswitch type allows stable opening and closing by snap action.
- Indication scale and setting scale are different and can be set arbitrarily.
- Recommended pressure setting range: Upper limit: (10%F.S. + Tangency Difference) to 90%F.S. Lower limit: 10%F.S. to (90%F.S. - Tangent Intersection) Receiver range:% F.S. is% max.P.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ200
- formats: vertical
- Shape: B Frame (Mounting Hole) 2 Contacts
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
- Pressure Range: 0~15
- Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
Order No.Order No.ss="init">
60-1349-43 Contact Pressure Gauge (JM31-233 x 15KPA) BU38-200X15KPA特徴
仕様
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|