A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
Pressure can also be checked at the measurement site.
Since the switching current is large, it is suitable for direct control of equipment.
Since the elements are independent for indication and contact, the indication after switching is also accurate.
Microswitch type allows stable opening and closing by snap action.
Indication scale and setting scale are different and can be set arbitrarily.
When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
The product image is an image. It may differ from the actual product.
Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
Only domestic specifications.
Spec
Surface Diameter: Φ100
formats: embedded
Shape: D Frame (Mounting Hole) 2 Contacts
Connection Screw: G3/8B
Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
Pressure Range: 0~50
Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
Order No.Order No.ss="init">
60-1345-05 Contact Pressure Gauge (JM16-433 x 50MPA) DU38-100X50MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
A pressure gauge with a contact point that incorporates a mechanical contact mechanism into the indicator.
At a preset pressure, an ON/OFF electrical signal is generated. This signal can generate alarms such as buzzers, bells, pilot lights, and control processes such as motors, pumps, and control valves.
Pressure can also be checked at the measurement site.
Since the switching current is large, it is suitable for direct control of equipment.
Since the elements are independent for indication and contact, the indication after switching is also accurate.
Microswitch type allows stable opening and closing by snap action.
Indication scale and setting scale are different and can be set arbitrarily.
When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
The product image is an image. It may differ from the actual product.
Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
Only domestic specifications.
仕様
Surface Diameter: Φ100
formats: embedded
Shape: D Frame (Mounting Hole) 2 Contacts
Connection Screw: G3/8B
Wetted Part Material: Corrosion-Resistant Connection Part: SCS14 Bourdon Tube: SUS316
Pressure Range: 0~50
Setting Precision/Contact Precision: Within ±3%F.S./Within ±1%F.S.
