60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ75
- Shape: Recessed D Frame (Mounting Hole)
- Connection Screw: G3/8B
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -10~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
Order No.
60-1332-33
型番
DT38-75X-23KPA
標準価格
JPY: 21,400
USD: 134.24
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockSupplier Stock"init">
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ75
- Shape: Recessed D Frame (Mounting Hole)
- Connection Screw: G3/8B
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -10~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
アズワン品番
60-1332-33
型番
DT38-75X-23KPA
標準価格
JPY: 21,400
USD: 134.24
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
60-1332-25
Microbarometer (GL19-231 x 5KPA) DT38-75X5KPA
DT38-75X5KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-26
Micrometer (GL19-231 x 7KPA) DT38-75X7KPA
DT38-75X7KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-27
Microbarometer (GL19-231 x 10KPA) DT38-75X10KPA
DT38-75X10KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-28
Microbarometer (GL19-231 x 15KPA) DT38-75X15KPA
DT38-75X15KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-29
Micrometer (GL19-231 x -5KPA) DT38-75X-5KPA
DT38-75X-5KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-30
Micrometer (GL19-231 x -7KPA) DT38-75X-7KPA
DT38-75X-7KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-31
Micrometer (GL19-231 x -10KPA) DT38-75X-10KPA
DT38-75X-10KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-32
Microbarometer (GL19-231 x -15KPA) DT38-75X-15KPA
DT38-75X-15KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-33
Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
DT38-75X-23KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-34
Micrometer (GL19-231X-2/5KPA) DT38-75X-25KPA
DT38-75X-25KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-35
Microbarometer (GL19-231X-3/2KPA) DT38-75X-32KPA
DT38-75X-32KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-36
Microbarometer (GL19-231X-5/2KPA) DT38-75X-52KPA
DT38-75X-52KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-37
Microbarometer (GL19-231X-5/5KPA) DT38-75X-55KPA
DT38-75X-55KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-38
Microbarometer (GL19-231X-5/10KPA) DT38-75X-510KPA
DT38-75X-510KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-39
Microbarometer (GL19-231X-10/5KPA) DT38-75X-105KPA
DT38-75X-105KPA
1piece
JPY: 21,400
USD: 134.24
This page is the page of Microbarometer (GL19-231X-2/3KPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
Features
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Surface Diameter: Φ75
- Shape: Recessed D Frame (Mounting Hole)
- Connection Screw: G3/8B
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -10~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
Order No.
60-1332-33
Model No.
DT38-75X-23KPA
Standard price
JPY: 21,400
USD: 134.24
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1332-25
Microbarometer (GL19-231 x 5KPA) DT38-75X5KPA
DT38-75X5KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-26
Micrometer (GL19-231 x 7KPA) DT38-75X7KPA
DT38-75X7KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-27
Microbarometer (GL19-231 x 10KPA) DT38-75X10KPA
DT38-75X10KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-28
Microbarometer (GL19-231 x 15KPA) DT38-75X15KPA
DT38-75X15KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-29
Micrometer (GL19-231 x -5KPA) DT38-75X-5KPA
DT38-75X-5KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-30
Micrometer (GL19-231 x -7KPA) DT38-75X-7KPA
DT38-75X-7KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-31
Micrometer (GL19-231 x -10KPA) DT38-75X-10KPA
DT38-75X-10KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-32
Microbarometer (GL19-231 x -15KPA) DT38-75X-15KPA
DT38-75X-15KPA
1piece
JPY: 20,600
USD: 129.22
60-1332-33
Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
DT38-75X-23KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-34
Micrometer (GL19-231X-2/5KPA) DT38-75X-25KPA
DT38-75X-25KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-35
Microbarometer (GL19-231X-3/2KPA) DT38-75X-32KPA
DT38-75X-32KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-36
Microbarometer (GL19-231X-5/2KPA) DT38-75X-52KPA
DT38-75X-52KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-37
Microbarometer (GL19-231X-5/5KPA) DT38-75X-55KPA
DT38-75X-55KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-38
Microbarometer (GL19-231X-5/10KPA) DT38-75X-510KPA
DT38-75X-510KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-39
Microbarometer (GL19-231X-10/5KPA) DT38-75X-105KPA
DT38-75X-105KPA
1piece
JPY: 21,400
USD: 134.24
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ75
- Shape: Recessed D Frame (Mounting Hole)
- Connection Screw: G3/8B
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -10~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
| Order No. | 60-1332-33 | |
|---|---|---|
| 型番 | DT38-75X-23KPA | |
| 標準価格 |
JPY: 21,400
USD: 134.24
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [Supplier StockSupplier Stock"init">
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPA特徴
仕様
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
This page is the page of Microbarometer (GL19-231X-2/3KPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
60-1332-33 Microbarometer (GL19-231X-2/3KPA) DT38-75X-23KPAFeatures
Spec
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|