Spec

• Fluid to be measured: air, water, oil (gas or liquid that does not corrode the connection)
• Operating environment: In a place where there is no flammable gas or liquid that may cause fire or explosion under normal conditions.
• mounting: horizontal mounting
• Connection Screw: R1/4
• Wetted Part Material: Diaphragm: SUS630 (17-4 PH), Joint: SUS316
• Pressure Range: – 0.1~0.5
• Accuracy: ±(1.0%F.S. +1digit)at23°C
• Power source: 12~24 V DC±10%
• Temperature coefficient: ±0.1%F.S./°C (both zero point and span)
• Maximum allowable pressure: 2 times the pressure range (1.5 times above the 35 MPa range)
• Display method: 4-digit LED digital display (character height 8 mm)
• Display period: 200 ms
• display units: MPA
• Current consumption: NPN selected: 30 mA DC or less (4~20 mA DC output: 50 mA or less) PNP selected: 40 mA DC or less (4~20 mA DC output: 60 mA or less, not including comparator output current)
• Comparator Output: NPA Open Collector X2 Output (30 V DC, 80 mA max)
• Analog output (optional): none
• scaling: display values, analog output
• Loop Check: Comparator Output, Analog Output
• Filter: None, 25 ms, 250 ms, 2.5 s, 5 s, 10 s (time constant) The set value is reflected in the comparator output and analog output.
• Error indication: Pressure out of range at overpressure, comparator overcurrent, zero adjustment
• Hold: Peak value and bottom value display
• Others: One-touch zero tone, key lock
• Protection circuit: power supply reverse connection, comparator overcurrent protection
• Operating temperature range: -10~50°C (no freezing or condensation)
• Operating humidity range: 35~85%RH (no condensation)
• Storage temperature range: -20~60°C (no freezing or condensation)
• Case Structure: IP65 (With Air Intake Port)
• Case Material: Front Case Portion PC/ABS (UL94V-0) Rear Case Portion ADC12
• Weight: Vertical Mounting Approx. 175 g (Including 2 m Cable) Horizontal Mounting Approx. 155 g (Including 2 m Cable)
•