Spec

• Measurement fluid: Gas measurement (Dry air, nitrogen gas, etc.), but not containing moisture, dust, etc.
• Operating environment: In a place where there is no flammable gas or liquid that may cause fire or explosion under normal conditions.
• mounting: panel mounts
• Pressure Connection Port: φ 4.5 Bamboo Shoot (Straight)
• displaying: differential pressure display
• Gas Contact Part Material: Silicon, Glass, Silicone, PP, PBT
• Case Material: PC/ABS
• Maximum allowable pressure (KPA): 50
• Display Method: 3 1/2 Digit LED Display (Character Height 10 mm)
• Display Frequency (ms): 200
• Power supply: 12~24 V DC ±10% Ripple voltage 10% (P-P) or less
• Current consumption: 50 mA DC or less (not including output signal)
• Comparator output/open collector: NPN or PNP(Selected at factory.)
• Comparator Output/Maximum Load Current: 80 mA DC Maximum Applied Voltage: 30 V DC (at NPN Output)/Residual Voltage: 1 V DC or Less
• Comparator Output/Response Speed Operation Mode: 100 ms or Less (Without Filter Setting) Hysteresis Mode, Window Comparator Mode
• Analog Output: Output Format: 1~5 V DC, Load Resistance: 10 kΩ or More, Response Speed: 100 ms or Less (Without Filter Setting), Resolution: Approx. 8 mV DC or Less
• Analog Output: Output Format: 4~20 mA DC Load Resistance: 500 Ω or Less (Power Voltage 20 V DCor More)/400 Ω or Less (Power supply voltage 15 V DC or more, but less than 20 V DC)/250 Ω or Less (Power Voltage 15 V DCor Less) Response Speed: 100 ms or Less (Without Filter Setting) Resolution: Approx. 0.032 mA DCor Less
• Input/output connectors: e-CON compliant
• Class of protection: IP40 (indoor specification)
• Operating temperature range: -10~50°C (no freezing or condensation)
• Operating humidity range: 35~85%RH (no condensation)
• Leakage Allowance: 1.7 x 10 to the Power of -4 Pa・m3/s(This product cannot be used for applications that require strict measurement of the amount of leakage, such as leak testing.)
• EMC compliance standards: EN61326-1:2013, EN61326-2-3:2013
• Compliance with the RoHS Directive (as of February 2025)
• UL: Standard No.: UL61010-1 File No.: E 475503: Connect the tester to NEC (National Electrical Code) class 2 or LPS (Limited Power Source).
• Degree of contamination: Standard IEC60664 Grade code 2
• Category of installation: Standard IEC60664 Level 2
• Operating altitude: 2000 m or less
• Mass (g): about 33
• Optional: Power Supply/Output Cable with Connector 2m, Vinyl Tube 2m
• Differential Pressure Range: 0~100 PA
• Accuracy: ±(1.5%F.S. +1digit)
•