60-1320-13 Gauge Saber G1/2XG1/2B Stainless Steel FG20-443X0.31MPA
Features
- There are various ways to mount the pressure gauge and accessories are required depending on the purpose.
- If overpressure (pressure exceeding the pressure range) is applied, not only will the life of the pressure gauge be shortened significantly, but there is also a risk of damage to the pressure gauge and unexpected disasters.
- The gauge saver is used to protect the pressure gauge when pressure changes rapidly and temporary overpressure is applied.
- It does not respond to sudden pressure fluctuations such as surge pressure or water hammer.
- Cannot be used with negative pressure.
- Packing is not included, so please request separately.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Screw size (d1 (female screw) x d2 (male screw)): G1/2XG1/2B
- Dimensions (B/E/F/H): 60/18/20/105
- Wetted Part Material: Stainless Steel
- elements: bellows
- Fluid to be used: Gas or liquid (However, it cannot be used in vacuum.)
- Set Pressure Adjustment Range: Over 25KPA to 10KPA or Less/Over 0.03MPA to 0.06 or Less/Over 0.04MPA to 0.08MPA or Less/Over 0.06MPA to 0.15MPA or Less/Over 0.08MPA to 0.2MPA or Less/Over 0.15MPA to 0.36MPA or Less/Over 0.2MPA to 0.6MPA or Less/Over 0.3MPA to 1MPA or Less
- Maximum working pressure: 1.5Mpa
- Repeatability: within 5%max.P.
- Cutting difference: 20%max.P. or less
- Operating fluid temperature: -5~80°C(However, it must not be frozen.)
- Wetted Part Material: Brass/C3604, SUS316(0.2MPA to 0.6MPA or Less, 0.3MPA to 1MPA or Less), Fusso Rubber, PTFE, C5212R Stainless Steel: SUS316, Fusso Rubber, PTFE, SUS16L
- Mass (kg): about 1.8
| Order No. | 60-1320-13 | |
|---|---|---|
| Model No. | FG20-443X0.31MPA | |
| Standard price |
JPY: 112,000
USD: 696.86
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-1320-10 | Gauge Saber G1/2XG1/2B Stainless Steel FG20-443X0.040.2MPA | FG20-443X0.040.2MPA | 1piece | JPY: 112,000 | USD: 696.86 |
|
|
 |
60-1320-11 | Gauge Saber G1/2XG1/2B Stainless Steel FG20-443X0.080.2MPA | FG20-443X0.080.2MPA | 1piece | JPY: 112,000 | USD: 696.86 |
|
|
 |
60-1320-12 | Gauge Saber G1/2XG1/2B Stainless Steel FG20-443X0.20.6MPA | FG20-443X0.20.6MPA | 1piece | JPY: 112,000 | USD: 696.86 |
|
|
 |
60-1320-13 | Gauge Saber G1/2XG1/2B Stainless Steel FG20-443X0.31MPA | FG20-443X0.31MPA | 1piece | JPY: 112,000 | USD: 696.86 |
|