60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Bracket)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3.5
-
Order No.
60-1308-89
型番
DU12-100X3.5MPA
標準価格
JPY: 13,400
USD: 84.06
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockQuotes="init">
60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Bracket)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3.5
-
アズワン品番
60-1308-89
型番
DU12-100X3.5MPA
標準価格
JPY: 13,400
USD: 84.06
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1308-72
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 40KPA) DU12-100X40KPA
DU12-100X40KPA
1piece
JPY: 20,100
USD: 126.08
60-1308-73
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 0.05MPA) DU12-100X0.05MPA
DU12-100X0.05MPA
1piece
JPY: 20,100
USD: 126.08
60-1308-74
Sealed Type Pressure Gauge Φ100 (BE15-141 x 0.06MPA) DU12-100X0.06MPA
DU12-100X0.06MPA
1piece
JPY: 20,100
USD: 126.08
60-1308-75
Sealed Type Pressure Gauge Φ100 (BE15-141 x 0.1MPA) DU12-100X0.1MPA
DU12-100X0.1MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-76
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 0.16MPA) DU12-100X0.16MPA
DU12-100X0.16MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-77
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 0.2MPA) DU12-100X0.2MPA
DU12-100X0.2MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-78
Sealed Type Pressure Gauge Φ100 (BE15-141 x 0.25MPA) DU12-100X0.25MPA
DU12-100X0.25MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-79
Sealed Type Pressure Gauge Φ100 (BE15-141 x 0.3MPA) DU12-100X0.3MPA
DU12-100X0.3MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-80
Sealed Type Pressure Gauge Φ100 (BE15-141 x 0.4MPA) DU12-100X0.4MPA
DU12-100X0.4MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-81
Sealed Type Pressure Gauge Φ100 (BE15-141 x 0.5MPA) DU12-100X0.5MPA
DU12-100X0.5MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-82
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 0.6MPA) DU12-100X0.6MPA
DU12-100X0.6MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-83
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 1MPA) DU12-100X1MPA
DU12-100X1MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-84
Sealed Type Pressure Gauge Φ100 (BE15-141 x 1.5MPA) DU12-100X1.5MPA
DU12-100X1.5MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-85
Sealed Type Pressure Gauge Φ100 (BE15-141 x 1.6MPA) DU12-100X1.6MPA
DU12-100X1.6MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-86
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 2MPA) DU12-100X2MPA
DU12-100X2MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-87
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 2.5MPA) DU12-100X2.5MPA
DU12-100X2.5MPA
1piece
JPY: 13,300
USD: 83.43
60-1308-88
Sealed Type Pressure Gauge Φ100 (BE15-141 x 3MPA) DU12-100X3MPA
DU12-100X3MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-89
Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA
DU12-100X3.5MPA
1piece
JPY: 13,400
USD: 84.06
60-1308-90
Sealed Type Pressure Gauge Φ100 (BE15-141 x 4MPA) DU12-100X4MPA
DU12-100X4MPA
1piece
JPY: 15,900
USD: 99.74
60-1308-91
Sealed Type Pressure Gauge Φ100 (BE15-141 x 5MPA) DU12-100X5MPA
DU12-100X5MPA
1piece
JPY: 15,900
USD: 99.74
60-1308-92
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 6MPA) DU12-100X6MPA
DU12-100X6MPA
1piece
JPY: 15,900
USD: 99.74
60-1308-93
Sealed Type Pressure Gauge Φ100 (BE15-141 x 7MPA) DU12-100X7MPA
DU12-100X7MPA
1piece
JPY: 15,900
USD: 99.74
60-1308-94
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 10MPA) DU12-100X10MPA
DU12-100X10MPA
1piece
JPY: 15,900
USD: 99.74
60-1308-95
Sealed Type Pressure Gauge Φ100 (BE15-141 x 15MPA) DU12-100X15MPA
DU12-100X15MPA
1piece
JPY: 18,200
USD: 114.16
60-1308-96
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 16MPA) DU12-100X16MPA
DU12-100X16MPA
1piece
JPY: 18,100
USD: 113.54
60-1308-97
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 20MPA) DU12-100X20MPA
DU12-100X20MPA
1piece
JPY: 18,200
USD: 114.16
60-1308-98
Sealed Type Pressure Gauge Φ100 (BE15-141 x 25MPA) DU12-100X25MPA
DU12-100X25MPA
1piece
JPY: 18,100
USD: 113.54
60-1308-99
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 30MPA) DU12-100X30MPA
DU12-100X30MPA
1piece
JPY: 18,200
USD: 114.16
60-1309-01
Sealed Pressure Gauge Diameter: Φ100 (BE15-141 x 35MPA) DU12-100X35MPA
DU12-100X35MPA
1piece
JPY: 18,200
USD: 114.16
60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Bracket)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3.5
| Order No. | 60-1308-89 | |
|---|---|---|
| 型番 | DU12-100X3.5MPA | |
| 標準価格 |
JPY: 13,400
USD: 84.06
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [Supplier StockQuotes="init">
60-1308-89 Sealed Type Pressure Gauge Φ100 (BE15-141 x 3.5MPA) DU12-100X3.5MPA特徴
仕様
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|