60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
Check the Series LineupCheck the Series Lineup"init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
SpecSpec class="init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: B Frame (Mounting Hole)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.5
-
Order No.Order No.ss="init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Plastic Casing
- Shape: B Frame (Mounting Hole)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.5
-
Order No.
60-1305-55
Model No.
BMU12-100X0.5MPA
Standard price
JPY: 15,000
USD: 94.09
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
60-1305-51
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.1MPA) BMU12-100X0.1MPA
BMU12-100X0.1MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-52
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX0.2MPA) BMU12-100X0.2MPA
BMU12-100X0.2MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-53
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.3MPA) BMU12-100X0.3MPA
BMU12-100X0.3MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-54
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX0.4MPA) BMU12-100X0.4MPA
BMU12-100X0.4MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-55
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
BMU12-100X0.5MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-56
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.6MPA) BMU12-100X0.6MPA
BMU12-100X0.6MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-57
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX1MPA) BMU12-100X1MPA
BMU12-100X1MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-58
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX1.5MPA) BMU12-100X1.5MPA
BMU12-100X1.5MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-59
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX1.6MPA) BMU12-100X1.6MPA
BMU12-100X1.6MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-60
Sealed Type Pressure Gauge Φ100 (BE12-241-MX2MPA) BMU12-100X2MPA
BMU12-100X2MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-61
Sealed Type Pressure Gauge Φ100 (BE12-241-MX2.5MPA) BMU12-100X2.5MPA
BMU12-100X2.5MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-62
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX3.5MPA) BMU12-100X3.5MPA
BMU12-100X3.5MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-63
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX-0.1MPA) BMU12-100X-0.1MPA
BMU12-100X-0.1MPA
1piece
JPY: 15,800
USD: 99.11
This page is the page of Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: B Frame (Mounting Hole)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.5
-
Order No.
60-1305-55
Model No.
BMU12-100X0.5MPA
Standard price
JPY: 15,000
USD: 94.09
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1305-51
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.1MPA) BMU12-100X0.1MPA
BMU12-100X0.1MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-52
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX0.2MPA) BMU12-100X0.2MPA
BMU12-100X0.2MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-53
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.3MPA) BMU12-100X0.3MPA
BMU12-100X0.3MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-54
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX0.4MPA) BMU12-100X0.4MPA
BMU12-100X0.4MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-55
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
BMU12-100X0.5MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-56
Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.6MPA) BMU12-100X0.6MPA
BMU12-100X0.6MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-57
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX1MPA) BMU12-100X1MPA
BMU12-100X1MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-58
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX1.5MPA) BMU12-100X1.5MPA
BMU12-100X1.5MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-59
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX1.6MPA) BMU12-100X1.6MPA
BMU12-100X1.6MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-60
Sealed Type Pressure Gauge Φ100 (BE12-241-MX2MPA) BMU12-100X2MPA
BMU12-100X2MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-61
Sealed Type Pressure Gauge Φ100 (BE12-241-MX2.5MPA) BMU12-100X2.5MPA
BMU12-100X2.5MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-62
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX3.5MPA) BMU12-100X3.5MPA
BMU12-100X3.5MPA
1piece
JPY: 15,000
USD: 94.09
60-1305-63
Sealed Pressure Gauge Diameter: Φ100 (BE12-241-MX-0.1MPA) BMU12-100X-0.1MPA
BMU12-100X-0.1MPA
1piece
JPY: 15,800
USD: 99.11
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: B Frame (Mounting Hole)
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.5
Order No.Order No.ss="init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPA特徴
仕様
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
This page is the page of Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
60-1305-55 Sealed Type Pressure Gauge Φ100 (BE12-241-MX0.5MPA) BMU12-100X0.5MPAFeatures
Spec
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|