60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA
- Products InformationProducts Informationinit">
60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecASONEs="init">
60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: B Frame (Mounting Hole)
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.3
Order No. 60-1304-33 Model No. BMU38-100X0.3MPA Standard price JPY: 11,800 USD: 73.42 Excange rate 1USD= 160.72JPY
Valid price in JapanQuantity 1piece Stock in Japan 
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
60-1304-29 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.1MPA) BMU38-100X0.1MPA BMU38-100X0.1MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-30 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.16MPA) BMU38-100X0.16MPA BMU38-100X0.16MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-31 Sealed Type Pressure Gauge Φ100 (BE12-231-MX0.2MPA) BMU38-100X0.2MPA BMU38-100X0.2MPA 1piece JPY: 11,800 USD: 73.42 
60-1304-32 Sealed Type Pressure Gauge Φ100 (BE12-231-MX0.25MPA) BMU38-100X0.25MPA BMU38-100X0.25MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-33 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.3MPA) BMU38-100X0.3MPA BMU38-100X0.3MPA 1piece JPY: 11,800 USD: 73.42 
60-1304-34 Sealed Type Pressure Gauge Φ100 (BE12-231-MX0.4MPA) BMU38-100X0.4MPA BMU38-100X0.4MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-35 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX0.5MPA) BMU38-100X0.5MPA BMU38-100X0.5MPA 1piece JPY: 11,800 USD: 73.42 
60-1304-36 Sealed Type Pressure Gauge Φ100 (BE12-231-MX0.6MPA) BMU38-100X0.6MPA BMU38-100X0.6MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-37 Sealed Type Pressure Gauge Φ100 (BE12-231-MX1MPA) BMU38-100X1MPA BMU38-100X1MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-38 Sealed Type Pressure Gauge Φ100 (BE12-231-MX1.5MPA) BMU38-100X1.5MPA BMU38-100X1.5MPA 1piece JPY: 11,800 USD: 73.42 
60-1304-39 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX1.6MPA) BMU38-100X1.6MPA BMU38-100X1.6MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-40 Sealed Pressure Gauge Diameter: Φ100 (BE12-231-MX2MPA) BMU38-100X2MPA BMU38-100X2MPA 1piece JPY: 11,800 USD: 73.42 
60-1304-41 Sealed Type Pressure Gauge Φ100 (BE12-231-MX2.5MPA) BMU38-100X2.5MPA BMU38-100X2.5MPA 1piece JPY: 11,700 USD: 72.80 
60-1304-42 Sealed Type Pressure Gauge Φ100 (BE12-231-MX3MPA) BMU38-100X3.5MPA BMU38-100X3.5MPA 1piece JPY: 11,800 USD: 73.42 
60-1304-43 Sealed Type Pressure Gauge Φ100 (BE12-231-MX-0.1MPA) BMU38-100X-0.1MPA BMU38-100X-0.1MPA 1piece JPY: 11,700 USD: 72.80