60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
FeaturesFeatures class="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
Order No.Order No.ss="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
アズワン品番
60-1282-83
Model No.
AUR38-75X1MPA
標準価格
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in JapanStock in Japanass="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
アズワン品番
60-1282-83
型番
AUR38-75X1MPA
標準価格
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
Supplier StockASONEs="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
Order No.
60-1282-83
Model No.
AUR38-75X1MPA
Standard price
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1282-75
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.1MPA) AUR38-75X0.1MPA
AUR38-75X0.1MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-76
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.16MPA) AUR38-75X0.16MPA
AUR38-75X0.16MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-77
Sealed Type Pressure Gauge Φ75 (BC10-181 x 0.2MPA) AUR38-75X0.2MPA
AUR38-75X0.2MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-78
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.25MPA) AUR38-75X0.25MPA
AUR38-75X0.25MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-79
Sealed Type Pressure Gauge Φ75 (BC10-181 x 0.3MPA) AUR38-75X0.3MPA
AUR38-75X0.3MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-80
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.4MPA) AUR38-75X0.4MPA
AUR38-75X0.4MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-81
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.5MPA) AUR38-75X0.5MPA
AUR38-75X0.5MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-82
Sealed Type Pressure Gauge Φ75 (BC10-181 x 0.6MPA) AUR38-75X0.6MPA
AUR38-75X0.6MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-83
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
AUR38-75X1MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-84
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1.5MPA) AUR38-75X1.5MPA
AUR38-75X1.5MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-85
Sealed Type Pressure Gauge Φ75 (BC10-181 x 1.6MPA) AUR38-75X1.6MPA
AUR38-75X1.6MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-86
Sealed Type Pressure Gauge Φ75 (BC10-181 x 2MPA) AUR38-75X2MPA
AUR38-75X2MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-87
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 2.5MPA) AUR38-75X2.5MPA
AUR38-75X2.5MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-88
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 3.5MPA) AUR38-75X3.5MPA
AUR38-75X3.5MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-89
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 4MPA) AUR38-75X4MPA
AUR38-75X4MPA
1piece
JPY: 13,500
USD: 84.68
60-1282-90
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 5MPA) AUR38-75X5MPA
AUR38-75X5MPA
1piece
JPY: 13,600
USD: 85.31
60-1282-91
Sealed Type Pressure Gauge Φ75 (BC10-181 x 6MPA) AUR38-75X6MPA
AUR38-75X6MPA
1piece
JPY: 13,500
USD: 84.68
60-1282-92
Sealed Type Pressure Gauge Φ75 (BC10-181 x 10MPA) AUR38-75X10MPA
AUR38-75X10MPA
1piece
JPY: 13,500
USD: 84.68
60-1282-93
Sealed Type Pressure Gauge Φ75 (BC10-181 x 16MPA) AUR38-75X16MPA
AUR38-75X16MPA
1piece
JPY: 15,600
USD: 97.86
60-1282-94
Sealed Type Pressure Gauge Φ75 (BC10-181 x 25MPA) AUR38-75X25MPA
AUR38-75X25MPA
1piece
JPY: 15,600
USD: 97.86
60-1282-95
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 35MPA) AUR38-75X35MPA
AUR38-75X35MPA
1piece
JPY: 15,600
USD: 97.86
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
Order No.Order No.ss="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
アズワン品番
60-1282-83
Model No.
AUR38-75X1MPA
標準価格
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in JapanStock in Japanass="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
アズワン品番
60-1282-83
型番
AUR38-75X1MPA
標準価格
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
Supplier StockASONEs="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
-
Order No.
60-1282-83
Model No.
AUR38-75X1MPA
Standard price
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1282-75
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.1MPA) AUR38-75X0.1MPA
AUR38-75X0.1MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-76
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.16MPA) AUR38-75X0.16MPA
AUR38-75X0.16MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-77
Sealed Type Pressure Gauge Φ75 (BC10-181 x 0.2MPA) AUR38-75X0.2MPA
AUR38-75X0.2MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-78
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.25MPA) AUR38-75X0.25MPA
AUR38-75X0.25MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-79
Sealed Type Pressure Gauge Φ75 (BC10-181 x 0.3MPA) AUR38-75X0.3MPA
AUR38-75X0.3MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-80
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.4MPA) AUR38-75X0.4MPA
AUR38-75X0.4MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-81
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 0.5MPA) AUR38-75X0.5MPA
AUR38-75X0.5MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-82
Sealed Type Pressure Gauge Φ75 (BC10-181 x 0.6MPA) AUR38-75X0.6MPA
AUR38-75X0.6MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-83
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
AUR38-75X1MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-84
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1.5MPA) AUR38-75X1.5MPA
AUR38-75X1.5MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-85
Sealed Type Pressure Gauge Φ75 (BC10-181 x 1.6MPA) AUR38-75X1.6MPA
AUR38-75X1.6MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-86
Sealed Type Pressure Gauge Φ75 (BC10-181 x 2MPA) AUR38-75X2MPA
AUR38-75X2MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-87
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 2.5MPA) AUR38-75X2.5MPA
AUR38-75X2.5MPA
1piece
JPY: 11,000
USD: 69.00
60-1282-88
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 3.5MPA) AUR38-75X3.5MPA
AUR38-75X3.5MPA
1piece
JPY: 11,200
USD: 70.26
60-1282-89
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 4MPA) AUR38-75X4MPA
AUR38-75X4MPA
1piece
JPY: 13,500
USD: 84.68
60-1282-90
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 5MPA) AUR38-75X5MPA
AUR38-75X5MPA
1piece
JPY: 13,600
USD: 85.31
60-1282-91
Sealed Type Pressure Gauge Φ75 (BC10-181 x 6MPA) AUR38-75X6MPA
AUR38-75X6MPA
1piece
JPY: 13,500
USD: 84.68
60-1282-92
Sealed Type Pressure Gauge Φ75 (BC10-181 x 10MPA) AUR38-75X10MPA
AUR38-75X10MPA
1piece
JPY: 13,500
USD: 84.68
60-1282-93
Sealed Type Pressure Gauge Φ75 (BC10-181 x 16MPA) AUR38-75X16MPA
AUR38-75X16MPA
1piece
JPY: 15,600
USD: 97.86
60-1282-94
Sealed Type Pressure Gauge Φ75 (BC10-181 x 25MPA) AUR38-75X25MPA
AUR38-75X25MPA
1piece
JPY: 15,600
USD: 97.86
60-1282-95
Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 35MPA) AUR38-75X35MPA
AUR38-75X35MPA
1piece
JPY: 15,600
USD: 97.86
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
Order No.Order No.ss="init">
60-1282-83 Sealed Pressure Gauge Diameter: Φ75 (BC10-181 x 1MPA) AUR38-75X1MPA特徴
仕様
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|