60-1281-69 Sealed Pressure Gauge Diameter: Φ75 (BC10-131 x 3.5MPA) AU38-75X3.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: A-frame
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3.5
| Order No. | 60-1281-69 | |
|---|---|---|
| 型番 | AU38-75X3.5MPA | |
| 標準価格 |
JPY: 14,000
USD: 87.82
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|