60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
Check the Series LineupCheck the Series Lineup"init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
FeaturesFeatures class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
FeaturesFeatures class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
-
Order No.Order No.ss="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】ASONE
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
-
Order No.
60-1280-21
Model No.
DU14-60X0.16MPA
Standard price
JPY: 10,600
USD: 66.45
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1280-20
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.1MPA) DU14-60X0.1MPA
DU14-60X0.1MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-21
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
DU14-60X0.16MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-22
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.2MPA) DU14-60X0.2MPA
DU14-60X0.2MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-23
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.25MPA) DU14-60X0.25MPA
DU14-60X0.25MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-24
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.3MPA) DU14-60X0.3MPA
DU14-60X0.3MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-25
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.4MPA) DU14-60X0.4MPA
DU14-60X0.4MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-26
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.5MPA) DU14-60X0.5MPA
DU14-60X0.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-27
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.6MPA) DU14-60X0.6MPA
DU14-60X0.6MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-28
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 1MPA) DU14-60X1MPA
DU14-60X1MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-29
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 1.5MPA) DU14-60X1.5MPA
DU14-60X1.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-30
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 1.6MPA) DU14-60X1.6MPA
DU14-60X1.6MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-31
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 2MPA) DU14-60X2MPA
DU14-60X2MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-32
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 2.5MPA) DU14-60X2.5MPA
DU14-60X2.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-33
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 3MPA) DU14-60X3MPA
DU14-60X3MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-34
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 3.5MPA) DU14-60X3.5MPA
DU14-60X3.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-35
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 4MPA) DU14-60X4MPA
DU14-60X4MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-36
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 5MPA) DU14-60X5MPA
DU14-60X5MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-37
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 6MPA) DU14-60X6MPA
DU14-60X6MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-38
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 7MPA) DU14-60X7MPA
DU14-60X7MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-39
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 10MPA) DU14-60X10MPA
DU14-60X10MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-40
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 15MPA) DU14-60X15MPA
DU14-60X15MPA
1piece
JPY: 14,900
USD: 93.40
60-1280-41
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 16MPA) DU14-60X16MPA
DU14-60X16MPA
1piece
JPY: 14,800
USD: 92.77
60-1280-42
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 20MPA) DU14-60X20MPA
DU14-60X20MPA
1piece
JPY: 14,900
USD: 93.40
60-1280-43
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 25MPA) DU14-60X25MPA
DU14-60X25MPA
1piece
JPY: 14,800
USD: 92.77
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
-
Order No.Order No.ss="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】ASONE
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
-
Order No.
60-1280-21
Model No.
DU14-60X0.16MPA
Standard price
JPY: 10,600
USD: 66.45
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1280-20
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.1MPA) DU14-60X0.1MPA
DU14-60X0.1MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-21
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
DU14-60X0.16MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-22
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.2MPA) DU14-60X0.2MPA
DU14-60X0.2MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-23
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.25MPA) DU14-60X0.25MPA
DU14-60X0.25MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-24
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.3MPA) DU14-60X0.3MPA
DU14-60X0.3MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-25
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.4MPA) DU14-60X0.4MPA
DU14-60X0.4MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-26
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.5MPA) DU14-60X0.5MPA
DU14-60X0.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-27
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.6MPA) DU14-60X0.6MPA
DU14-60X0.6MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-28
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 1MPA) DU14-60X1MPA
DU14-60X1MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-29
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 1.5MPA) DU14-60X1.5MPA
DU14-60X1.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-30
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 1.6MPA) DU14-60X1.6MPA
DU14-60X1.6MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-31
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 2MPA) DU14-60X2MPA
DU14-60X2MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-32
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 2.5MPA) DU14-60X2.5MPA
DU14-60X2.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-33
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 3MPA) DU14-60X3MPA
DU14-60X3MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-34
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 3.5MPA) DU14-60X3.5MPA
DU14-60X3.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-35
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 4MPA) DU14-60X4MPA
DU14-60X4MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-36
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 5MPA) DU14-60X5MPA
DU14-60X5MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-37
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 6MPA) DU14-60X6MPA
DU14-60X6MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-38
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 7MPA) DU14-60X7MPA
DU14-60X7MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-39
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 10MPA) DU14-60X10MPA
DU14-60X10MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-40
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 15MPA) DU14-60X15MPA
DU14-60X15MPA
1piece
JPY: 14,900
USD: 93.40
60-1280-41
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 16MPA) DU14-60X16MPA
DU14-60X16MPA
1piece
JPY: 14,800
USD: 92.77
60-1280-42
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 20MPA) DU14-60X20MPA
DU14-60X20MPA
1piece
JPY: 14,900
USD: 93.40
60-1280-43
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 25MPA) DU14-60X25MPA
DU14-60X25MPA
1piece
JPY: 14,800
USD: 92.77
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
-
Order No.Order No.ss="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA 【AXEL GLOBAL】ASONE
Contact us
NAGANO KEIKI Co., Ltd.
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
-
Order No.
60-1280-21
Model No.
DU14-60X0.16MPA
Standard price
JPY: 10,600
USD: 66.45
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1280-20
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.1MPA) DU14-60X0.1MPA
DU14-60X0.1MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-21
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
DU14-60X0.16MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-22
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.2MPA) DU14-60X0.2MPA
DU14-60X0.2MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-23
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.25MPA) DU14-60X0.25MPA
DU14-60X0.25MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-24
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.3MPA) DU14-60X0.3MPA
DU14-60X0.3MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-25
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 0.4MPA) DU14-60X0.4MPA
DU14-60X0.4MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-26
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.5MPA) DU14-60X0.5MPA
DU14-60X0.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-27
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.6MPA) DU14-60X0.6MPA
DU14-60X0.6MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-28
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 1MPA) DU14-60X1MPA
DU14-60X1MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-29
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 1.5MPA) DU14-60X1.5MPA
DU14-60X1.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-30
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 1.6MPA) DU14-60X1.6MPA
DU14-60X1.6MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-31
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 2MPA) DU14-60X2MPA
DU14-60X2MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-32
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 2.5MPA) DU14-60X2.5MPA
DU14-60X2.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-33
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 3MPA) DU14-60X3MPA
DU14-60X3MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-34
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 3.5MPA) DU14-60X3.5MPA
DU14-60X3.5MPA
1piece
JPY: 10,600
USD: 66.45
60-1280-35
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 4MPA) DU14-60X4MPA
DU14-60X4MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-36
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 5MPA) DU14-60X5MPA
DU14-60X5MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-37
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 6MPA) DU14-60X6MPA
DU14-60X6MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-38
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 7MPA) DU14-60X7MPA
DU14-60X7MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-39
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 10MPA) DU14-60X10MPA
DU14-60X10MPA
1piece
JPY: 13,100
USD: 82.12
60-1280-40
Sealed Pressure Gauge Diameter φ60 (BA15-221 x 15MPA) DU14-60X15MPA
DU14-60X15MPA
1piece
JPY: 14,900
USD: 93.40
60-1280-41
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 16MPA) DU14-60X16MPA
DU14-60X16MPA
1piece
JPY: 14,800
USD: 92.77
60-1280-42
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 20MPA) DU14-60X20MPA
DU14-60X20MPA
1piece
JPY: 14,900
USD: 93.40
60-1280-43
Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 25MPA) DU14-60X25MPA
DU14-60X25MPA
1piece
JPY: 14,800
USD: 92.77
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: G1/4B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~0.16
Order No.Order No.ss="init">
60-1280-21 Sealed Pressure Gauge Diameter φ 60 (BA15-221 x 0.16MPA) DU14-60X0.16MPAFeatures
Spec
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|