60-1271-53 Standard Pressure Gauge (AE20-141 x 3MPA) AT12-100X3MPA
FeaturesFeatures class="init">
60-1271-53 Standard Pressure Gauge (AE20-141 x 3MPA) AT12-100X3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1271-53 Standard Pressure Gauge (AE20-141 x 3MPA) AT12-100X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Vertical (A-frame)
- Surface Diameter: Φ100
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
-
Order No.
60-1271-53
Model No.
AT12-100X3MPA
Standard price
JPY: 7,400
USD: 46.39
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
60-1271-53 Standard Pressure Gauge (AE20-141 x 3MPA) AT12-100X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with a connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Vertical (A-frame)
- Surface Diameter: Φ100
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
| Order No. | 60-1271-53 | |
|---|---|---|
| Model No. | AT12-100X3MPA | |
| Standard price |
JPY: 7,400
USD: 46.39
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|