60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical Type (D Frame) (Mounting Hole)
- Surface Diameter: Φ100
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~10
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
-
Order No.
60-1270-34
Model No.
DUR38-100X10MPA
Standard price
JPY: 15,800
USD: 99.11
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityStock in Japanass="init">
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical Type (D Frame) (Mounting Hole)
- Surface Diameter: Φ100
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~10
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
-
アズワン品番
60-1270-34
型番
DUR38-100X10MPA
標準価格
JPY: 15,800
USD: 99.11
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
Supplier Stock
Product VariationsProduct Variations">
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical Type (D Frame) (Mounting Hole)
- Surface Diameter: Φ100
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~10
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
-
アズワン品番
60-1270-34
型番
DUR38-100X10MPA
標準価格
JPY: 15,800
USD: 99.11
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1270-18
Standard Pressure Gauge (AE15-281 x 40KPA) DUR38-100X40KPA
DUR38-100X40KPA
1piece
JPY: 21,300
USD: 133.61
60-1270-19
Standard Pressure Gauge (AE15-281 x 0.1MPA) DUR38-100X0.1MPA
DUR38-100X0.1MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-20
Standard Pressure Gauge (AE15-281 x 0.16MPA) DUR38-100X0.16MPA
DUR38-100X0.16MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-21
Standard Pressure Gauge (AE15-281 x 0.2MPA) DUR38-100X0.2MPA
DUR38-100X0.2MPA
1piece
JPY: 12,000
USD: 75.27
60-1270-22
Standard Pressure Gauge (AE15-281 x 0.25MPA) DUR38-100X0.25MPA
DUR38-100X0.25MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-23
Standard Pressure Gauge (AE15-281 x 0.3MPA) DUR38-100X0.3MPA
DUR38-100X0.3MPA
1piece
JPY: 12,000
USD: 75.27
60-1270-24
Standard Pressure Gauge (AE15-281 x 0.4MPA) DUR38-100X0.4MPA
DUR38-100X0.4MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-25
Standard Pressure Gauge (AE15-281 x 0.6MPA) DUR38-100X0.5MPA
DUR38-100X0.5MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-26
Standard Pressure Gauge (AE15-281 x 1MPA) DUR38-100X1MPA
DUR38-100X1MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-27
Standard Pressure Gauge (AE15-281 x 1.5MPA) DUR38-100X1.5MPA
DUR38-100X1.5MPA
1piece
JPY: 12,000
USD: 75.27
60-1270-28
Standard Pressure Gauge (AE15-281 x 1.6MPA) DUR38-100X1.6MPA
DUR38-100X1.6MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-29
Standard Pressure Gauge (AE15-281 x 2MPA) DUR38-100X2MPA
DUR38-100X2MPA
1piece
JPY: 12,000
USD: 75.27
60-1270-30
Standard Pressure Gauge (AE15-281 x 2.5MPA) DUR38-100X2.5MPA
DUR38-100X2.5MPA
1piece
JPY: 12,400
USD: 77.78
60-1270-31
Standard Pressure Gauge (AE15-281 x 3.5MPA) DUR38-100X3.5MPA
DUR38-100X3.5MPA
1piece
JPY: 12,000
USD: 75.27
60-1270-32
Standard Pressure Gauge (AE15-281 x 4MPA) DUR38-100X4MPA
DUR38-100X4MPA
1piece
JPY: 15,800
USD: 99.11
60-1270-33
Standard Pressure Gauge (AE15-281 x 6MPA) DUR38-100X6MPA
DUR38-100X6MPA
1piece
JPY: 15,800
USD: 99.11
60-1270-34
Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA
DUR38-100X10MPA
1piece
JPY: 15,800
USD: 99.11
60-1270-35
Standard Pressure Gauge (AE15-281 x 15MPA) DUR38-100X15MPA
DUR38-100X15MPA
1piece
JPY: 18,000
USD: 112.91
60-1270-36
Standard Pressure Gauge (AE15-281 x 16MPA) DUR38-100X16MPA
DUR38-100X16MPA
1piece
JPY: 18,000
USD: 112.91
60-1270-37
Standard Pressure Gauge (AE15-281 x 25MPA) DUR38-100X25MPA
DUR38-100X25MPA
1piece
JPY: 18,000
USD: 112.91
60-1270-38
Standard Pressure Gauge (AE15-281 x 35MPA) DUR38-100X35MPA
DUR38-100X35MPA
1piece
JPY: 18,000
USD: 112.91
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical Type (D Frame) (Mounting Hole)
- Surface Diameter: Φ100
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~10
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
| Order No. | 60-1270-34 | |
|---|---|---|
| Model No. | DUR38-100X10MPA | |
| Standard price |
JPY: 15,800
USD: 99.11
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | QuantityStock in Japanass="init">
60-1270-34 Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA特徴
仕様
Product VariationsProduct Variations">
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| アズワン品番 | 60-1270-34 | |
|---|---|---|
| 型番 | DUR38-100X10MPA | |
| 標準価格 |
JPY: 15,800
USD: 99.11
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
60-1270-18 | Standard Pressure Gauge (AE15-281 x 40KPA) DUR38-100X40KPA | DUR38-100X40KPA | 1piece | JPY: 21,300 | USD: 133.61 |
|
|
|
60-1270-19 | Standard Pressure Gauge (AE15-281 x 0.1MPA) DUR38-100X0.1MPA | DUR38-100X0.1MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-20 | Standard Pressure Gauge (AE15-281 x 0.16MPA) DUR38-100X0.16MPA | DUR38-100X0.16MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-21 | Standard Pressure Gauge (AE15-281 x 0.2MPA) DUR38-100X0.2MPA | DUR38-100X0.2MPA | 1piece | JPY: 12,000 | USD: 75.27 |
|
|
|
60-1270-22 | Standard Pressure Gauge (AE15-281 x 0.25MPA) DUR38-100X0.25MPA | DUR38-100X0.25MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-23 | Standard Pressure Gauge (AE15-281 x 0.3MPA) DUR38-100X0.3MPA | DUR38-100X0.3MPA | 1piece | JPY: 12,000 | USD: 75.27 |
|
|
|
60-1270-24 | Standard Pressure Gauge (AE15-281 x 0.4MPA) DUR38-100X0.4MPA | DUR38-100X0.4MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-25 | Standard Pressure Gauge (AE15-281 x 0.6MPA) DUR38-100X0.5MPA | DUR38-100X0.5MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-26 | Standard Pressure Gauge (AE15-281 x 1MPA) DUR38-100X1MPA | DUR38-100X1MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-27 | Standard Pressure Gauge (AE15-281 x 1.5MPA) DUR38-100X1.5MPA | DUR38-100X1.5MPA | 1piece | JPY: 12,000 | USD: 75.27 |
|
|
|
60-1270-28 | Standard Pressure Gauge (AE15-281 x 1.6MPA) DUR38-100X1.6MPA | DUR38-100X1.6MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-29 | Standard Pressure Gauge (AE15-281 x 2MPA) DUR38-100X2MPA | DUR38-100X2MPA | 1piece | JPY: 12,000 | USD: 75.27 |
|
|
|
60-1270-30 | Standard Pressure Gauge (AE15-281 x 2.5MPA) DUR38-100X2.5MPA | DUR38-100X2.5MPA | 1piece | JPY: 12,400 | USD: 77.78 |
|
|
|
60-1270-31 | Standard Pressure Gauge (AE15-281 x 3.5MPA) DUR38-100X3.5MPA | DUR38-100X3.5MPA | 1piece | JPY: 12,000 | USD: 75.27 |
|
|
|
60-1270-32 | Standard Pressure Gauge (AE15-281 x 4MPA) DUR38-100X4MPA | DUR38-100X4MPA | 1piece | JPY: 15,800 | USD: 99.11 |
|
|
|
60-1270-33 | Standard Pressure Gauge (AE15-281 x 6MPA) DUR38-100X6MPA | DUR38-100X6MPA | 1piece | JPY: 15,800 | USD: 99.11 |
|
|
|
60-1270-34 | Standard Pressure Gauge (AE15-281 x 10MPA) DUR38-100X10MPA | DUR38-100X10MPA | 1piece | JPY: 15,800 | USD: 99.11 |
|
|
|
60-1270-35 | Standard Pressure Gauge (AE15-281 x 15MPA) DUR38-100X15MPA | DUR38-100X15MPA | 1piece | JPY: 18,000 | USD: 112.91 |
|
|
|
60-1270-36 | Standard Pressure Gauge (AE15-281 x 16MPA) DUR38-100X16MPA | DUR38-100X16MPA | 1piece | JPY: 18,000 | USD: 112.91 |
|
|
|
60-1270-37 | Standard Pressure Gauge (AE15-281 x 25MPA) DUR38-100X25MPA | DUR38-100X25MPA | 1piece | JPY: 18,000 | USD: 112.91 |
|
|
|
60-1270-38 | Standard Pressure Gauge (AE15-281 x 35MPA) DUR38-100X35MPA | DUR38-100X35MPA | 1piece | JPY: 18,000 | USD: 112.91 |
|