60-1265-79 Standard Pressure Gauge (AC20-281-MX1MPA) BMTR38-75X1MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, and it is fixed to the panel.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- No JIS mark.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1265-79 Standard Pressure Gauge (AC20-281-MX1MPA) BMTR38-75X1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1265-79 Standard Pressure Gauge (AC20-281-MX1MPA) BMTR38-75X1MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, and it is fixed to the panel.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- No JIS mark.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical Type (B Frame) (Mounting Hole)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more at φ 150 and φ 200)
-
Order No.
60-1265-79
型番
BMTR38-75X1MPA
標準価格
JPY: 8,290
USD: 52.00
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier Stock
60-1265-79 Standard Pressure Gauge (AC20-281-MX1MPA) BMTR38-75X1MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, and it is fixed to the panel.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- No JIS mark.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical Type (B Frame) (Mounting Hole)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more at φ 150 and φ 200)
| Order No. | 60-1265-79 | |
|---|---|---|
| 型番 | BMTR38-75X1MPA | |
| 標準価格 |
JPY: 8,290
USD: 52.00
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| Supplier Stock |
|
|