60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Vertical (A-frame)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
-
Order No.
60-1264-01
Model No.
AT38-75X3MPA
Standard price
JPY: 7,200
USD: 45.13
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical (A-frame)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
-
アズワン品番
60-1264-01
型番
AT38-75X3MPA
標準価格
JPY: 7,200
USD: 45.13
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
Supplier Stock
Product VariationsProduct Variations">
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA 【AXEL GLOBAL】ASONE
Contact us
NAGANO KEIKI Co., Ltd.
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Vertical (A-frame)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
-
Order No.
60-1264-01
Model No.
AT38-75X3MPA
Standard price
JPY: 7,200
USD: 45.13
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1263-86
Standard Pressure Gauge (AC20-131 x 100KPA) AT38-75X100KPA
AT38-75X100KPA
1piece
JPY: 6,950
USD: 43.57
60-1263-87
Standard Pressure Gauge (AC20-131 x 0.1MPA) AT38-75X0.1MPA
AT38-75X0.1MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-88
Standard Pressure Gauge (AC20-131 x 0.16MPA) AT38-75X0.16MPA
AT38-75X0.16MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-89
Standard Pressure Gauge (AC20-131 x 0.2MPA) AT38-75X0.2MPA
AT38-75X0.2MPA
1piece
JPY: 7,200
USD: 45.13
60-1263-90
Standard Pressure Gauge (AC20-131 x 0.2.5MPA) AT38-75X0.25MPA
AT38-75X0.25MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-91
Standard Pressure Gauge (AC20-131 x 0.3MPA) AT38-75X0.3MPA
AT38-75X0.3MPA
1piece
JPY: 7,200
USD: 45.13
60-1263-92
Standard Pressure Gauge (AC20-131 x 0.4MPA) AT38-75X0.4MPA
AT38-75X0.4MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-93
Standard Pressure Gauge (AC20-131 x 0.5MPA) AT38-75X0.5MPA
AT38-75X0.5MPA
1piece
JPY: 7,200
USD: 45.13
60-1263-94
Standard Pressure Gauge (AC20-131 x 0.6MPA) AT38-75X0.6MPA
AT38-75X0.6MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-95
Standard Pressure Gauge (AC20-131 x 1MPA) AT38-75X1MPA
AT38-75X1MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-96
Standard Pressure Gauge (AC20-131 x 1.5MPA) AT38-75X1.5MPA
AT38-75X1.5MPA
1piece
JPY: 7,200
USD: 45.13
60-1263-97
Standard Pressure Gauge (AC20-131 x 1.6MPA) AT38-75X1.6MPA
AT38-75X1.6MPA
1piece
JPY: 6,950
USD: 43.57
60-1263-98
Standard Pressure Gauge (AC20-131 x 2MPA) AT38-75X2MPA
AT38-75X2MPA
1piece
JPY: 7,200
USD: 45.13
60-1263-99
Standard Pressure Gauge (AC20-131 x 2.5MPA) AT38-75X2.5MPA
AT38-75X2.5MPA
1piece
JPY: 6,950
USD: 43.57
60-1264-01
Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA
AT38-75X3MPA
1piece
JPY: 7,200
USD: 45.13
60-1264-02
Standard Pressure Gauge (AC20-131 x 3.5MPA) AT38-75X3.5MPA
AT38-75X3.5MPA
1piece
JPY: 7,200
USD: 45.13
60-1264-03
Standard Pressure Gauge (AC20-131 x 4MPA) AT38-75X4MPA
AT38-75X4MPA
1piece
JPY: 9,410
USD: 58.99
60-1264-04
Standard Pressure Gauge (AC20-131 x 5MPA) AT38-75X5MPA
AT38-75X5MPA
1piece
JPY: 9,550
USD: 59.86
60-1264-05
Standard Pressure Gauge (AC20-131 x 6MPA) AT38-75X6MPA
AT38-75X6MPA
1piece
JPY: 9,410
USD: 58.99
60-1264-06
Standard Pressure Gauge (AC20-131 x 7MPA) AT38-75X7MPA
AT38-75X7MPA
1piece
JPY: 9,550
USD: 59.86
60-1264-07
Standard Pressure Gauge (AC20-131 x 10MPA) AT38-75X10MPA
AT38-75X10MPA
1piece
JPY: 9,410
USD: 58.99
60-1264-08
Standard Pressure Gauge (AC20-131 x 15MPA) AT38-75X15MPA
AT38-75X15MPA
1piece
JPY: 11,700
USD: 73.34
60-1264-09
Standard Pressure Gauge (AC20-131 x 16MPA) AT38-75X16MPA
AT38-75X16MPA
1piece
JPY: 11,600
USD: 72.71
60-1264-10
Standard Pressure Gauge (AC20-131 x 25MPA) AT38-75X25MPA
AT38-75X25MPA
1piece
JPY: 11,600
USD: 72.71
60-1264-11
Standard Pressure Gauge (AC20-131 x 35MPA) AT38-75X35MPA
AT38-75X35MPA
1piece
JPY: 11,700
USD: 73.34
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Vertical (A-frame)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
| Order No. | 60-1264-01 | |
|---|---|---|
| Model No. | AT38-75X3MPA | |
| Standard price |
JPY: 7,200
USD: 45.13
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | QuantityQuantityass="init">
60-1264-01 Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA特徴
仕様
Product VariationsProduct Variations">
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Order No. | 60-1264-01 | |
|---|---|---|
| Model No. | AT38-75X3MPA | |
| Standard price |
JPY: 7,200
USD: 45.13
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
60-1263-86 | Standard Pressure Gauge (AC20-131 x 100KPA) AT38-75X100KPA | AT38-75X100KPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-87 | Standard Pressure Gauge (AC20-131 x 0.1MPA) AT38-75X0.1MPA | AT38-75X0.1MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-88 | Standard Pressure Gauge (AC20-131 x 0.16MPA) AT38-75X0.16MPA | AT38-75X0.16MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-89 | Standard Pressure Gauge (AC20-131 x 0.2MPA) AT38-75X0.2MPA | AT38-75X0.2MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1263-90 | Standard Pressure Gauge (AC20-131 x 0.2.5MPA) AT38-75X0.25MPA | AT38-75X0.25MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-91 | Standard Pressure Gauge (AC20-131 x 0.3MPA) AT38-75X0.3MPA | AT38-75X0.3MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1263-92 | Standard Pressure Gauge (AC20-131 x 0.4MPA) AT38-75X0.4MPA | AT38-75X0.4MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-93 | Standard Pressure Gauge (AC20-131 x 0.5MPA) AT38-75X0.5MPA | AT38-75X0.5MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1263-94 | Standard Pressure Gauge (AC20-131 x 0.6MPA) AT38-75X0.6MPA | AT38-75X0.6MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-95 | Standard Pressure Gauge (AC20-131 x 1MPA) AT38-75X1MPA | AT38-75X1MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-96 | Standard Pressure Gauge (AC20-131 x 1.5MPA) AT38-75X1.5MPA | AT38-75X1.5MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1263-97 | Standard Pressure Gauge (AC20-131 x 1.6MPA) AT38-75X1.6MPA | AT38-75X1.6MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1263-98 | Standard Pressure Gauge (AC20-131 x 2MPA) AT38-75X2MPA | AT38-75X2MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1263-99 | Standard Pressure Gauge (AC20-131 x 2.5MPA) AT38-75X2.5MPA | AT38-75X2.5MPA | 1piece | JPY: 6,950 | USD: 43.57 |
|
|
|
60-1264-01 | Standard Pressure Gauge (AC20-131 x 3MPA) AT38-75X3MPA | AT38-75X3MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1264-02 | Standard Pressure Gauge (AC20-131 x 3.5MPA) AT38-75X3.5MPA | AT38-75X3.5MPA | 1piece | JPY: 7,200 | USD: 45.13 |
|
|
|
60-1264-03 | Standard Pressure Gauge (AC20-131 x 4MPA) AT38-75X4MPA | AT38-75X4MPA | 1piece | JPY: 9,410 | USD: 58.99 |
|
|
|
60-1264-04 | Standard Pressure Gauge (AC20-131 x 5MPA) AT38-75X5MPA | AT38-75X5MPA | 1piece | JPY: 9,550 | USD: 59.86 |
|
|
|
60-1264-05 | Standard Pressure Gauge (AC20-131 x 6MPA) AT38-75X6MPA | AT38-75X6MPA | 1piece | JPY: 9,410 | USD: 58.99 |
|
|
|
60-1264-06 | Standard Pressure Gauge (AC20-131 x 7MPA) AT38-75X7MPA | AT38-75X7MPA | 1piece | JPY: 9,550 | USD: 59.86 |
|
|
|
60-1264-07 | Standard Pressure Gauge (AC20-131 x 10MPA) AT38-75X10MPA | AT38-75X10MPA | 1piece | JPY: 9,410 | USD: 58.99 |
|
|
|
60-1264-08 | Standard Pressure Gauge (AC20-131 x 15MPA) AT38-75X15MPA | AT38-75X15MPA | 1piece | JPY: 11,700 | USD: 73.34 |
|
|
|
60-1264-09 | Standard Pressure Gauge (AC20-131 x 16MPA) AT38-75X16MPA | AT38-75X16MPA | 1piece | JPY: 11,600 | USD: 72.71 |
|
|
|
60-1264-10 | Standard Pressure Gauge (AC20-131 x 25MPA) AT38-75X25MPA | AT38-75X25MPA | 1piece | JPY: 11,600 | USD: 72.71 |
|
|
|
60-1264-11 | Standard Pressure Gauge (AC20-131 x 35MPA) AT38-75X35MPA | AT38-75X35MPA | 1piece | JPY: 11,700 | USD: 73.34 |
|