60-1263-69 Standard Pressure Gauge (AC15-281 x 3.5MPA) DUR38-75X3.5MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Vertical Type (D Frame) (Mounting Hole)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~3.5
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
| Order No. | 60-1263-69 | |
|---|---|---|
| Model No. | DUR38-75X3.5MPA | |
| Standard price |
JPY: 8,200
USD: 51.40
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-1263-58 | Standard Pressure Gauge (AC15-281 x 0.1MPA) DUR38-75X0.1MPA | DUR38-75X0.1MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-59 | Standard Pressure Gauge (AC15-281 x 0.2MPA) DUR38-75X0.2MPA | DUR38-75X0.2MPA | 1piece | JPY: 8,200 | USD: 51.40 |
|
|
 |
60-1263-60 | Standard Pressure Gauge (AC15-281 x 0.25MPA) DUR38-75X0.25MPA | DUR38-75X0.25MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-61 | Standard Pressure Gauge (AC15-281 x 0.3MPA) DUR38-75X0.3MPA | DUR38-75X0.3MPA | 1piece | JPY: 8,200 | USD: 51.40 |
|
|
 |
60-1263-62 | Standard Pressure Gauge (AC15-281 x 0.4MPA) DUR38-75X0.4MPA | DUR38-75X0.4MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-63 | Standard Pressure Gauge (AC15-281 x 0.6MPA) DUR38-75X0.6MPA | DUR38-75X0.6MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-64 | Standard Pressure Gauge (AC15-281 x 1MPA) DUR38-75X1MPA | DUR38-75X1MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-65 | Standard Pressure Gauge (AC15-281 x 1.5MPA) DUR38-75X1.5MPA | DUR38-75X1.5MPA | 1piece | JPY: 8,200 | USD: 51.40 |
|
|
 |
60-1263-66 | Standard Pressure Gauge (AC15-281 x 1.6MPA) DUR38-75X1.6MPA | DUR38-75X1.6MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-67 | Standard Pressure Gauge (AC15-281 x 2MPA) DUR38-75X2MPA | DUR38-75X2MPA | 1piece | JPY: 8,200 | USD: 51.40 |
|
|
 |
60-1263-68 | Standard Pressure Gauge (AC15-281 x 2.5MPA) DUR38-75X2.5MPA | DUR38-75X2.5MPA | 1piece | JPY: 8,060 | USD: 50.52 |
|
|
 |
60-1263-69 | Standard Pressure Gauge (AC15-281 x 3.5MPA) DUR38-75X3.5MPA | DUR38-75X3.5MPA | 1piece | JPY: 8,200 | USD: 51.40 |
|
|
 |
60-1263-70 | Standard Pressure Gauge (AC15-281 x 4MPA) DUR38-75X4MPA | DUR38-75X4MPA | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
60-1263-71 | Standard Pressure Gauge (AC15-281 x 5MPA) DUR38-75X5MPA | DUR38-75X5MPA | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
60-1263-72 | Standard Pressure Gauge (AC15-281 x 6MPA) DUR38-75X6MPA | DUR38-75X6MPA | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
60-1263-73 | Standard Pressure Gauge (AC15-281 x 10MPA) DUR38-75X10MPA | DUR38-75X10MPA | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
60-1263-74 | Standard Pressure Gauge (AC15-281 x 16MPA) DUR38-75X16MPA | DUR38-75X16MPA | 1piece | JPY: 12,700 | USD: 79.61 |
|
|
 |
60-1263-75 | Standard Pressure Gauge (AC15-281 x 25MPA) DUR38-75X25MPA | DUR38-75X25MPA | 1piece | JPY: 12,700 | USD: 79.61 |
|
|
 |
60-1263-76 | Standard Pressure Gauge (AC15-281 x 35MPA) DUR38-75X35MPA | DUR38-75X35MPA | 1piece | JPY: 12,700 | USD: 79.61 |
|