60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA
- Products InformationProducts Informationinit">
60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, and it is fixed to the panel.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, and it is fixed to the panel.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical B Frame (Mounting Hole)
- Surface Diameter: φ 60 Mounting Hole
- Surface Diameter: Φ60
- Fluid to be measured: gas or liquid
- Connection Screw: G1/4B
- Wetted Part Material: Corrosion Resistant
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more at φ 150 and φ 200)
Order No. 60-1257-79 Model No. BT14-60X3MPA Standard price JPY: 15,000 USD: 94.09 Excange rate 1USD= 159.42JPY
Valid price in JapanQuantity 1piece Stock in Japan 
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[Supplier StockSupplier Stock"init">60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1257-79 Standard Pressure Gauge (AA10-223 x 3MPA) BT14-60X3MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, and it is fixed to the panel.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical B Frame (Mounting Hole)
- Surface Diameter: φ 60 Mounting Hole
- Surface Diameter: Φ60
- Fluid to be measured: gas or liquid
- Connection Screw: G1/4B
- Wetted Part Material: Corrosion Resistant
- Pressure range (MPA): 0~3
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more at φ 150 and φ 200)
アズワン品番 60-1257-79 型番 BT14-60X3MPA 標準価格 JPY: 15,000 USD: 94.09 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1piece 在庫数
サプライヤ在庫