60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA
- Products InformationProducts Informationinit">
60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical (A-frame)
- Surface Diameter: Φ60
- Fluid to be measured: gas or liquid
- Connection Screw: G1/4B
- Wetted Part Material: Corrosion Resistant
- Pressure Range (MPA): -0.1~0
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
Order No. 60-1256-32 Model No. AT14-60X-0.1MPA Standard price JPY: 11,200 USD: 70.21 Excange rate 1USD= 159.53JPY
Valid price in JapanQuantity 1piece Stock in JapanStock in Japanass="init"> 60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1256-32 Normal Type Vacuum Gauge (AA10-123 x -0.1MPA) AT14-60X-0.1MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Vertical (A-frame)
- Surface Diameter: Φ60
- Fluid to be measured: gas or liquid
- Connection Screw: G1/4B
- Wetted Part Material: Corrosion Resistant
- Pressure Range (MPA): -0.1~0
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
アズワン品番 60-1256-32 型番 AT14-60X-0.1MPA 標準価格 JPY: 11,200 USD: 70.21 Excange rate 1USD= 159.53JPY
Valid price in Japan入り数 1piece 在庫数 
Supplier Stock