AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
NAGANO KEIKI Co., Ltd.

60-1256-11　Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA

特徴

  • The seven digits of the model number (model number) are below the scale mark.
  • Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
  • The pressure measurement range is wide, and corrosion resistance is required.
  • It is a self-supporting type with the connection part directly attached to pressure piping.
  • When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
  • Confirm that the wetted part material is suitable for the gas and liquid to be measured.
  • When using for oxygen, please specify that oil is prohibited.
  • When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
  • The product image is an image. It may differ from the actual product.
  • Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
  • Only domestic specifications.

Spec

  • Type: Vertical (A-frame)
  • Surface Diameter: Φ60
  • Fluid to be measured: gas or liquid
  • Connection Screw: G1/4B
  • Wetted Part Material: Corrosion Resistant
  • Pressure range (MPA): 0~0.2
  • Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
  •  
Order No.Order No.ss="init"> 60-1256-11 Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
NAGANO KEIKI Co., Ltd.

60-1256-11　Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA

特徴

  • The seven digits of the model number (model number) are below the scale mark.
  • Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
  • The pressure measurement range is wide, and corrosion resistance is required.
  • It is a self-supporting type with the connection part directly attached to pressure piping.
  • When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
  • Confirm that the wetted part material is suitable for the gas and liquid to be measured.
  • When using for oxygen, please specify that oil is prohibited.
  • When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
  • The product image is an image. It may differ from the actual product.
  • Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
  • Only domestic specifications.

仕様

  • Type: Vertical (A-frame)
  • Surface Diameter: Φ60
  • Fluid to be measured: gas or liquid
  • Connection Screw: G1/4B
  • Wetted Part Material: Corrosion Resistant
  • Pressure range (MPA): 0~0.2
  • Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
  •  
Order No. 60-1256-11
Model No. AT14-60X0.2MPA
Standard price JPY: 11,400 USD: 71.46
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
在庫数
サプライヤ在庫

商品のバリエーション （サイズ違い・スペック違い・オプション品など）

商品イメージ アズワン品番 商品名 型番 QuantityStock in Japanass="init"> 60-1256-11 Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
NAGANO KEIKI Co., Ltd.

60-1256-11　Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA

特徴

  • The seven digits of the model number (model number) are below the scale mark.
  • Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
  • The pressure measurement range is wide, and corrosion resistance is required.
  • It is a self-supporting type with the connection part directly attached to pressure piping.
  • When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
  • Confirm that the wetted part material is suitable for the gas and liquid to be measured.
  • When using for oxygen, please specify that oil is prohibited.
  • When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
  • The product image is an image. It may differ from the actual product.
  • Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
  • Only domestic specifications.

仕様

  • Type: Vertical (A-frame)
  • Surface Diameter: Φ60
  • Fluid to be measured: gas or liquid
  • Connection Screw: G1/4B
  • Wetted Part Material: Corrosion Resistant
  • Pressure range (MPA): 0~0.2
  • Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
  •  
アズワン品番 60-1256-11
型番 AT14-60X0.2MPA
標準価格 JPY: 11,400 USD: 71.46
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数 1piece
在庫数
Supplier StockASONEs="init"> 60-1256-11 Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
NAGANO KEIKI Co., Ltd.

60-1256-11　Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA

Features

  • The seven digits of the model number (model number) are below the scale mark.
  • Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
  • The pressure measurement range is wide, and corrosion resistance is required.
  • It is a self-supporting type with the connection part directly attached to pressure piping.
  • When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
  • Confirm that the wetted part material is suitable for the gas and liquid to be measured.
  • When using for oxygen, please specify that oil is prohibited.
  • When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
  • The product image is an image. It may differ from the actual product.
  • Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
  • Only domestic specifications.

Spec

  • Type: Vertical (A-frame)
  • Surface Diameter: Φ60
  • Fluid to be measured: gas or liquid
  • Connection Screw: G1/4B
  • Wetted Part Material: Corrosion Resistant
  • Pressure range (MPA): 0~0.2
  • Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
  •  
Order No. 60-1256-11
Model No. AT14-60X0.2MPA
Standard price JPY: 11,400 USD: 71.46
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
60-1256-09 Standard Pressure Gauge (AA10-123 x 0.1MPA)　AT14-60X0.1MPA AT14-60X0.1MPA 1piece JPY: 11,200 USD: 70.21

60-1256-10 Standard Pressure Gauge (AA10-123 x 0.16MPA)　AT14-60X0.16MPA AT14-60X0.16MPA 1piece JPY: 11,200 USD: 70.21

60-1256-11 Standard Pressure Gauge (AA10-123 x 0.2MPA)　AT14-60X0.2MPA AT14-60X0.2MPA 1piece JPY: 11,400 USD: 71.46

60-1256-12 Standard Pressure Gauge (AA10-123 x 0.25MPA)　AT14-60X0.25MPA AT14-60X0.25MPA 1piece JPY: 11,200 USD: 70.21

60-1256-13 Standard Pressure Gauge (AA10-123 x 0.3MPA)　AT14-60X0.3MPA AT14-60X0.3MPA 1piece JPY: 11,400 USD: 71.46

60-1256-14 Standard Pressure Gauge (AA10-123 x 0.4MPA)　AT14-60X0.4MPA AT14-60X0.4MPA 1piece JPY: 11,200 USD: 70.21

60-1256-15 Standard Pressure Gauge (AA10-123 x 0.5MPA)　AT14-60X0.5MPA AT14-60X0.5MPA 1piece JPY: 11,400 USD: 71.46

60-1256-16 Standard Pressure Gauge (AA10-123 x 0.6MPA)　AT14-60X0.6MPA AT14-60X0.6MPA 1piece JPY: 11,200 USD: 70.21

60-1256-17 Standard Pressure Gauge (AA10-123 x 1MPA)　AT14-60X1MPA AT14-60X1MPA 1piece JPY: 11,200 USD: 70.21

60-1256-18 Standard Pressure Gauge (AA10-123 x 1.5MPA)　AT14-60X1.5MPA AT14-60X1.5MPA 1piece JPY: 11,400 USD: 71.46

60-1256-19 Standard Pressure Gauge (AA10-123 x 1.6MPA)　AT14-60X1.6MPA AT14-60X1.6MPA 1piece JPY: 11,200 USD: 70.21

60-1256-20 Standard Pressure Gauge (AA10-123 x 2MPA)　AT14-60X2MPA AT14-60X2MPA 1piece JPY: 11,400 USD: 71.46

60-1256-21 Standard Pressure Gauge (AA10-123 x 2.5MPA)　AT14-60X2.5MPA AT14-60X2.5MPA 1piece JPY: 11,200 USD: 70.21

60-1256-22 Standard Pressure Gauge (AA10-123 x 3MPA)　AT14-60X3MPA AT14-60X3MPA 1piece JPY: 11,400 USD: 71.46

60-1256-23 Standard Pressure Gauge (AA10-123 x 3.5MPA)　AT14-60X3.5MPA AT14-60X3.5MPA 1piece JPY: 11,400 USD: 71.46

60-1256-24 Standard Pressure Gauge (AA10-123 x 4MPA)　AT14-60X4MPA AT14-60X4MPA 1piece JPY: 13,800 USD: 86.50

60-1256-25 Standard Pressure Gauge (AA10-123 x 5MPA)　AT14-60X5MPA AT14-60X5MPA 1piece JPY: 13,900 USD: 87.13

60-1256-26 Standard Pressure Gauge (AA10-123 x 6MPA)　AT14-60X6MPA AT14-60X6MPA 1piece JPY: 13,800 USD: 86.50

60-1256-27 Standard Pressure Gauge (AA10-123 x 7MPA)　AT14-60X7MPA AT14-60X7MPA 1piece JPY: 13,900 USD: 87.13

60-1256-28 Standard Pressure Gauge (AA10-123 x 10MPA)　AT14-60X10MPA AT14-60X10MPA 1piece JPY: 13,800 USD: 86.50

60-1256-29 Standard Pressure Gauge (AA10-123 x 15MPA)　AT14-60X15MPA AT14-60X15MPA 1piece JPY: 15,500 USD: 97.16

60-1256-30 Standard Pressure Gauge (AA10-123 x 16MPA)　AT14-60X16MPA AT14-60X16MPA 1piece JPY: 15,500 USD: 97.16

60-1256-31 Standard Pressure Gauge (AA10-123 x 25MPA)　AT14-60X25MPA AT14-60X25MPA 1piece JPY: 15,500 USD: 97.16

This page is the page of Standard Pressure Gauge (AA10-123 x 0.2MPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.