Spec

• External dimensions (mm): 574 x 524 x 1765
• Internal dimensions (mm): 560 x 483 x 1486
• Dehumidification method: Electrolytic discharge of H2O by a solid polymer electrolysis dehumidifier (Rosal (R))
• Dehumidification capacity (at 30%RH): 8 hours or less
• * This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60%RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60%RH
• Humidity control range: 15%RH to room temperature
• * This is a reference value for no internal load and outdoor environment of 25 degrees Celsius and 60%RH (varies with outside air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60%RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 98 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 deg. C (25 deg. C to 40 deg. C)/+/- 5%RH (15 ~ 40%RH at 25 deg. C)
• * The humidity indicator is "LL" when the humidity is less than 10%. If it exceeds 60%RH, the humidity indicator will be "HH."
• Display resolution: 1 deg. C/1%RH
• Sampling interval: 0.5 sec
• Material: Body/PMMA (acrylic)/Frame/Aluminum/Control Unit/Steel Sheet
• Shelf board dimensions: 490mm x 460mm
• Shelf mounting pitch (minimum shelf spacing): 50mm (40mm)
• Shelf Board Specifications: Stainless Steel (SUS 430)
• Shelf Board Load Capacity: Approx. 20 kg/sheet
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60 Hz
• Power consumption: about 63W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 65mm in diameter, made of nylon (with 2 stoppers)
• Weight: approximately 38kg
• Accessories: 4 stainless steel shelves
•