Features

A set of HBDV2T, an ultra-high viscosity type B-type viscometer, and a thermo cell.
The temperature of the sample can be raised up to 300°C by the electric heater, and it is recommended for the viscosity measurement of hot melt, asphalt, polymer and other samples which melt at high temperature.
Temperature range: +40°C ~ +300°C, covering higher temperatures than other options for temperature control using water.
It can measure absolute viscosity with a configuration corresponding to the coaxial double cylinder type rotary viscometer in JIS Z 8803.
The optional software allows you to connect to a PC and perform advanced measurements and analyses such as temperature dependent measurements.
Measurement results and measurement conditions can be saved to internal memory or USB memory.
Disposable spindles and chambers are also available for thermoset samples.

Spec

Measurement Viscosity Range * Depends on the spindle used. Please check the list for details.
When Using Thermocell Set: 128~80M (mPa · s)
When using standard spindle: 3200∼320M (mPa · s)
Setting speed: 0.1 to 200 (rpm)
Number of rotation speed changeover steps: 290 * 0.1 to 10 can be set every 0.1, 10 to 200 can be set every 1
Measurement accuracy: ±1.0%(F.S.)
Measurement repeatability: ±0.2%(F.S.)
Indicated items: Viscosity value (cP/mPa · s), torque value, spindle, number of revolutions, elapsed time
Power: 100∼125VAC 50/60Hz
Body Size: 360 x 350 x 590 mm
Body Weight: Approx. 9kg
Configuration Type B Viscometer (HBDV2T) + Thermocell Set