AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
AS ONE Corporation

4-1184-11　［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1200 x 830 x 2250 mm　ABS-1200HP

  • 別途送料
  • 組立

特徴

  • Fume hood suitable for powder work with HEPA filter attached to the back side of the baffle plate.
  • The air volume display function is equipped as standard, and you can check the exhaust condition and work.
  • The sash is a left-right sliding type, and the work frontage can be taken off high, so it is suitable for measuring work.

仕様

  • Specifications: Standard
  • External dimensions (mm): 1200 x 830 x 2250
  • Internal dimensions (mm): 950 x 510 x 1200
  • Weight (approx. kg): 270
  • Exterior: Steel (powder coating finish)
  • Interior: Chemical and heat resistant board (flame retardant, phenolic resin laminate)
  • Filter: High air volume HEPA filter Prefilter
  • Work surface: Epoxy resin top integral part (32 mm thick)
  • Sash: Tempered glass (5mm thick) right and left sliding type
  • Hydrant: Chemical-resistant paint remote-operated water supply connection port G 1/2 (female screw)
  • Outlet: Drain connection with resin embedded sink and drain trap 25 A
  • Outlet: 100 VAC -15 A with 2 serial grounding
  • Lighting: LED Fluorescent
  • Operating switch: Touch-panel lighting/fan
  • Safety features: Exhaust airflow indication
  • Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
  • Power connections: terminal block with electrical box
  • (Exhaust)
  • Working sash opening height (mm): 700
  • Controlled wind speed (m/s): 1.0
  • Airflow (m3/min): 19
  • Duct connector: 250 A
  • Required duct diameter (phi mm): 250
  • (Ancillary facilities)
  • Plumbing (location): 1
  • Fluorescent (light): 20 W x 2 light equivalent
  • Outlet (location): 2
  • *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
  • *Exhaust fan is not included. Please inquire.
  •  
Order No.ASONEs="init"> ［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1200 x 830 x 2250 mm　ABS-1200HP 4-1184-11 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
AS ONE Corporation

4-1184-11　［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1200 x 830 x 2250 mm　ABS-1200HP

  • Shipping fee extra
  • Assembly Required

Features

  • Fume hood suitable for powder work with HEPA filter attached to the back side of the baffle plate.
  • The air volume display function is equipped as standard, and you can check the exhaust condition and work.
  • The sash is a left-right sliding type, and the work frontage can be taken off high, so it is suitable for measuring work.

Spec

  • Specifications: Standard
  • External dimensions (mm): 1200 x 830 x 2250
  • Internal dimensions (mm): 950 x 510 x 1200
  • Weight (approx. kg): 270
  • Exterior: Steel (powder coating finish)
  • Interior: Chemical and heat resistant board (flame retardant, phenolic resin laminate)
  • Filter: High air volume HEPA filter Prefilter
  • Work surface: Epoxy resin top integral part (32 mm thick)
  • Sash: Tempered glass (5mm thick) right and left sliding type
  • Hydrant: Chemical-resistant paint remote-operated water supply connection port G 1/2 (female screw)
  • Outlet: Drain connection with resin embedded sink and drain trap 25 A
  • Outlet: 100 VAC -15 A with 2 serial grounding
  • Lighting: LED Fluorescent
  • Operating switch: Touch-panel lighting/fan
  • Safety features: Exhaust airflow indication
  • Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
  • Power connections: terminal block with electrical box
  • (Exhaust)
  • Working sash opening height (mm): 700
  • Controlled wind speed (m/s): 1.0
  • Airflow (m3/min): 19
  • Duct connector: 250 A
  • Required duct diameter (phi mm): 250
  • (Ancillary facilities)
  • Plumbing (location): 1
  • Fluorescent (light): 20 W x 2 light equivalent
  • Outlet (location): 2
  • *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
  • *Exhaust fan is not included. Please inquire.
  •  
Order No. 4-1184-11
Model No. ABS-1200HP
JAN Code 4589638429385
Standard price JPY: 1,920,000 USD: 12,043.66
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity 1piece
  Discontinued
Stock in Japan -

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
4-1184-11 ［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1200 x 830 x 2250 mm　ABS-1200HP ABS-1200HP
  • Shipping fee extra
  • Assembly Required
 1piece JPY: 1,920,000 USD: 12,043.66

-
4-1184-12 ［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1500 x 830 x 2250 mm　ABS-1500HP ABS-1500HP
  • Shipping fee extra
  • Assembly Required
 1piece JPY: 2,180,000 USD: 13,674.57

-
4-1184-13 ［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1800 x 830 x 2250 mm　ABS-1800HP ABS-1800HP
  • Shipping fee extra
  • Assembly Required
 1piece JPY: 2,280,000 USD: 14,301.84

-
4-1184-14 ［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 2400 x 830 x 2250 mm　ABS-2400HP ABS-2400HP
  • Shipping fee extra
  • Assembly Required
 1piece JPY: 3,280,000 USD: 20,574.58

-

Similar Products

1 / 1 ページ

Fume Hood (HEPA Filter Built-in Type) Standard 1200 x 830 x 2250 mm ABS-1200HP

Fume Hood (HEPA Filter Built-in Type) Standard 1200 x 830 x 2250 mm ABS-1200HP

Product Catalog

Catalog Name Page
ASONE Catalog 2022 [Facility & Equipment for Labolatory] 51

This page is the page of ［Discontinued］Fume Hood (with built-in HEPA filter) Standard type 1200 x 830 x 2250 mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.