3-3937-23 ［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV
-
PrintPrintlass="init">
［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV 3-3937-23 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
AS ONE Corporation 3-3937-23 ［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV
特徴
- Since it is equipped with an inverter, it is very convenient to be able to flexibly change the exhaust air volume and static pressure even after installation.
- The air quantity display function is equipped as standard, and it is possible to check the exhaust condition and work.
Spec
- Specifications: Deep
- External dimensions (mm): 1800 x 980 x 2250
- Internal dimensions (mm): 1550 x 755 x 1200
- Weight (approx. kg): 485
- Number of pieces: 1
- Exterior: Steel (powder coating finish)
- Interior: Chemical and heat resistant board (flame retardant, phenolic resin laminate)
- Work surface: Epoxy resin top integral part (32 mm thick)
- Lifting sash: Tempered glass (5 mm thick) with balance-weight aperture restriction key (400 mm high), handle/ABS resin
- Hydrant: Chemical-resistant paint remote-operated water supply connection port G 1/2 (female screw)
- Outlet: Drain connection with resin embedded sink and drain trap 25 A
- Outlet: 100 VAC -15 A with 2 serial grounding
- Lighting: LED Fluorescent
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- Exhaust fan: top-mounted FRP direct connection motor
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- (Exhaust)
- Working sash opening height (mm): 400
- Controlled wind speed (m/s): 0.5
- Airflow (m3/min): 21
- Duct connector: 250 A
- Required duct diameter (phi mm): 250
- Exhaust fans
- Type: 100 KSS-O
- Power supply: 3 phi 200 V
- Motor (kW): 0.4
- (Ancillary facilities)
- Plumbing (location): 1
- Fluorescent (light): 40 W x 2 light equivalent
- Outlet (location): 2
- *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
- *If the duct distance is long or the number of turns is high, the fan capacity may be insufficient.
- *On-board exhaust fan capacity Please refer to page 152 of the catalog for details.
Order No. 3-3937-23 Model No. ABDF-1800INV JAN Code 4589638430381 Standard price JPY: 2,630,000 USD: 16,497.30 Excange rate 1USD= 159.42JPY
Valid price in JapanQuantity 1piece 
［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV 3-3937-23 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
AS ONE Corporation 3-3937-23 ［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV
特徴
- Since it is equipped with an inverter, it is very convenient to be able to flexibly change the exhaust air volume and static pressure even after installation.
- The air quantity display function is equipped as standard, and it is possible to check the exhaust condition and work.
仕様
- Specifications: Deep
- External dimensions (mm): 1800 x 980 x 2250
- Internal dimensions (mm): 1550 x 755 x 1200
- Weight (approx. kg): 485
- Number of pieces: 1
- Exterior: Steel (powder coating finish)
- Interior: Chemical and heat resistant board (flame retardant, phenolic resin laminate)
- Work surface: Epoxy resin top integral part (32 mm thick)
- Lifting sash: Tempered glass (5 mm thick) with balance-weight aperture restriction key (400 mm high), handle/ABS resin
- Hydrant: Chemical-resistant paint remote-operated water supply connection port G 1/2 (female screw)
- Outlet: Drain connection with resin embedded sink and drain trap 25 A
- Outlet: 100 VAC -15 A with 2 serial grounding
- Lighting: LED Fluorescent
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- Exhaust fan: top-mounted FRP direct connection motor
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- (Exhaust)
- Working sash opening height (mm): 400
- Controlled wind speed (m/s): 0.5
- Airflow (m3/min): 21
- Duct connector: 250 A
- Required duct diameter (phi mm): 250
- Exhaust fans
- Type: 100 KSS-O
- Power supply: 3 phi 200 V
- Motor (kW): 0.4
- (Ancillary facilities)
- Plumbing (location): 1
- Fluorescent (light): 40 W x 2 light equivalent
- Outlet (location): 2
- *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
- *If the duct distance is long or the number of turns is high, the fan capacity may be insufficient.
- *On-board exhaust fan capacity Please refer to page 152 of the catalog for details.
アズワン品番 3-3937-23 型番 ABDF-1800INV JANコード 4589638430381 標準価格 JPY: 2,630,000 USD: 16,497.30 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1piece
在庫数 - Product VariationsProduct Variations">
［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV 3-3937-23 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
AS ONE Corporation 3-3937-23 ［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV
特徴
- Since it is equipped with an inverter, it is very convenient to be able to flexibly change the exhaust air volume and static pressure even after installation.
- The air quantity display function is equipped as standard, and it is possible to check the exhaust condition and work.
仕様
- Specifications: Deep
- External dimensions (mm): 1800 x 980 x 2250
- Internal dimensions (mm): 1550 x 755 x 1200
- Weight (approx. kg): 485
- Number of pieces: 1
- Exterior: Steel (powder coating finish)
- Interior: Chemical and heat resistant board (flame retardant, phenolic resin laminate)
- Work surface: Epoxy resin top integral part (32 mm thick)
- Lifting sash: Tempered glass (5 mm thick) with balance-weight aperture restriction key (400 mm high), handle/ABS resin
- Hydrant: Chemical-resistant paint remote-operated water supply connection port G 1/2 (female screw)
- Outlet: Drain connection with resin embedded sink and drain trap 25 A
- Outlet: 100 VAC -15 A with 2 serial grounding
- Lighting: LED Fluorescent
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- Exhaust fan: top-mounted FRP direct connection motor
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- (Exhaust)
- Working sash opening height (mm): 400
- Controlled wind speed (m/s): 0.5
- Airflow (m3/min): 21
- Duct connector: 250 A
- Required duct diameter (phi mm): 250
- Exhaust fans
- Type: 100 KSS-O
- Power supply: 3 phi 200 V
- Motor (kW): 0.4
- (Ancillary facilities)
- Plumbing (location): 1
- Fluorescent (light): 40 W x 2 light equivalent
- Outlet (location): 2
- *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
- *If the duct distance is long or the number of turns is high, the fan capacity may be insufficient.
- *On-board exhaust fan capacity Please refer to page 152 of the catalog for details.
アズワン品番 3-3937-23 型番 ABDF-1800INV JANコード 4589638430381 標準価格 JPY: 2,630,000 USD: 16,497.30 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1piece
在庫数 - 商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product image アズワン品番 商品名 型番 入り数 Standard price 標準価格(ドル) Stock
[Supplier Stock]
3-3937-21 ［Discontinued］Fume Hood (with FRP fan and inverter) 1200 x 980 x 2250 mm deep ABDF-1200INV ABDF-1200INV - Shipping fee extraASONEs="init">
［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV 3-3937-23 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
AS ONE Corporation 3-3937-23 ［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV
Features
- Since it is equipped with an inverter, it is very convenient to be able to flexibly change the exhaust air volume and static pressure even after installation.
- The air quantity display function is equipped as standard, and it is possible to check the exhaust condition and work.
Spec
- Specifications: Deep
- External dimensions (mm): 1800 x 980 x 2250
- Internal dimensions (mm): 1550 x 755 x 1200
- Weight (approx. kg): 485
- Number of pieces: 1
- Exterior: Steel (powder coating finish)
- Interior: Chemical and heat resistant board (flame retardant, phenolic resin laminate)
- Work surface: Epoxy resin top integral part (32 mm thick)
- Lifting sash: Tempered glass (5 mm thick) with balance-weight aperture restriction key (400 mm high), handle/ABS resin
- Hydrant: Chemical-resistant paint remote-operated water supply connection port G 1/2 (female screw)
- Outlet: Drain connection with resin embedded sink and drain trap 25 A
- Outlet: 100 VAC -15 A with 2 serial grounding
- Lighting: LED Fluorescent
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- Exhaust fan: top-mounted FRP direct connection motor
- Operating switch: Touch-panel lighting/fan
- Safety features: Exhaust airflow indication
- Exhaust connection: PVC (Polyvinyl Chloride Resin) volume damper with phase flange
- Power connections: Terminal block with electrical box
- (Exhaust)
- Working sash opening height (mm): 400
- Controlled wind speed (m/s): 0.5
- Airflow (m3/min): 21
- Duct connector: 250 A
- Required duct diameter (phi mm): 250
- Exhaust fans
- Type: 100 KSS-O
- Power supply: 3 phi 200 V
- Motor (kW): 0.4
- (Ancillary facilities)
- Plumbing (location): 1
- Fluorescent (light): 40 W x 2 light equivalent
- Outlet (location): 2
- *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
- *If the duct distance is long or the number of turns is high, the fan capacity may be insufficient.
- *On-board exhaust fan capacity Please refer to page 152 of the catalog for details.
Order No. 3-3937-23 Model No. ABDF-1800INV JAN Code 4589638430381 Standard price JPY: 2,630,000 USD: 16,497.30 Excange rate 1USD= 159.42JPY
Valid price in JapanQuantity 1piece
Stock in Japan - Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]3-3937-21 ［Discontinued］Fume Hood (with FRP fan and inverter) 1200 x 980 x 2250 mm deep ABDF-1200INV ABDF-1200INV 1piece JPY: 2,360,000 USD: 14,803.66 -
3-3937-22 ［Discontinued］Fume Hood (with FRP fan and inverter) 1500 x 980 x 2250 mm deep ABDF-1500INV ABDF-1500INV 1piece JPY: 2,450,000 USD: 15,368.21 -
3-3937-23 ［Discontinued］Fume Hood (with FRP fan and inverter) 1800 x 980 x 2250 mm deep ABDF-1800INV ABDF-1800INV 1piece JPY: 2,630,000 USD: 16,497.30 -
Similar Products
Product Catalog
Catalog Name Page ASONE Catalog 2022 [Facility & Equipment for Labolatory] 50
