3-3936-12 ［Discontinued］Fume Hood Standard (with FRP fan with inverter) 1500 x 830 x 2250mm ABSF-1500INV
Features
- Since an inverter is mounted on the exhaust fan side, it is very convenient to be able to flexibly change the exhaust air volume and static pressure even after installation.
- The air quantity display function is equipped as standard, and it is possible to check the exhaust condition and work.
Spec
- Model number: ABSF -1500 INV
- Specifications: Standard
- external dimension (mm): 1500 x 830 x 2250
- inner size (mm): 1250 x 605 x 1200
- Weight (About kg): 350
- Exterior: Steel (powder coating finish)
- Interior: chemical resistant Heat-Resistant Board (Flame-Retardant material/phenolic laminated sheet or glass fiber mixed polyester)
- Work Plane: Epoxy Plastic top board Integral Part (32 mm Atsushi)
- Lifting sash: tempered glass (5 mm Atsushi) with balance weight opening restriction key (400 mm Height), Handle/ABS Plastic
- Hydrant: chemical coating Remote Operated Water Connection G 1/2 (Stop Female thread)
- drain port: Plastic Drainage connector 40 A socket with a built-in sink and trap
- Outlet: AC100V -15 A2 grounded
- lighting: Hf fluorescent lamps
- Operating Switch: Touch Panel Lighting/Fan
- Safety Function: Exhaust Air air volume Display
- Exhaust Connections: PVC (Plastic vinyl chloride ) with Volume Damper Phase Flanged
- power supply connection part: Terminal block with electric box
- Exhaust fan: Upper-mounted FRP motor with inverter
- *Shipping, carrying-in, installation, assembly, etc. are required separately. Please contact us.
- *If the duct distance is long and the number of turns is large, the fan ability may be insufficient.
- exhaust
- Work Sash Opening Height (mm): 400
- Controlled wind speed (m/s): 0.5
- air volume (m3/min): 16
- Duct Connector: 250 A
- Required duct diameter (Φ mm): 250
- exhaust fan
- Type: 100 KS5-O
- power supply: 3 Φ 200 V
- Motor (kW): 0.4
- ancillary equipment
- Plumbing (place): 1
- fluorescent lamps (bottle): 2 x 32 W
- Outlet (place): 2
| Order No. | 3-3936-12 | |
|---|---|---|
| Model No. | ABSF-1500INV | |
| JAN Code | 4589638177675 | |
| Standard price |
JPY: 1,880,000
USD: 11,784.62
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1unit | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
3-3936-11 | ［Discontinued］Fume Hood Standard (with FRP fan with inverter) 1200 x 830 x 2250mm ABSF-1200INV | ABSF-1200INV |
|
1unit | JPY: 1,770,000 | USD: 11,095.09 |
-
|
 |
3-3936-12 | ［Discontinued］Fume Hood Standard (with FRP fan with inverter) 1500 x 830 x 2250mm ABSF-1500INV | ABSF-1500INV |
|
1unit | JPY: 1,880,000 | USD: 11,784.62 |
-
|
 |
3-3936-13 | ［Discontinued］Fume Hood Standard (with FRP fan with inverter) 1800 x 830 x 2250mm ABSF-1800INV | ABSF-1800INV |
|
1unit | JPY: 2,100,000 | USD: 13,163.67 |
-
|
 |
3-3937-11 | ［Discontinued］Fume Hood Deep (with FRP fan with inverter) 1200 × 980 × 2250mm ABDF-1200INV | ABDF-1200INV |
|
1unit | JPY: 1,940,000 | USD: 12,160.72 |
-
|
 |
3-3937-12 | ［Discontinued］Fume Hood Deep (with FRP fan with inverter) 1500 × 980 × 2250mm ABDF-1500INV | ABDF-1500INV |
|
1unit | JPY: 2,080,000 | USD: 13,038.30 |
-
|
 |
3-3937-13 | ［Discontinued］Fume Hood Deep (with FRP fan with inverter) 1800 × 980 × 2250mm ABDF-1800INV | ABDF-1800INV |
|
1unit | JPY: 2,300,000 | USD: 14,417.35 |
-
|
Similar Products
Product Catalog
| Catalog Name | Page |
|---|---|
| ASONE Catalog 2020 [Facility & Equipment for Labolatory] | 42 |
| ASONE Catalog 2018 [Facility & Equipment for Labolatory] | 36 |