1-8517-31 Tabletop type Ionizer BF-X2ME
Features
- Because the HDC-AC system is used, the discharge needle is stain resistant and provides stable static elimination performance for a long time.
- Two types of louvers allow selection of static elimination areas.
- * Discharge needles are less worn and dirty, providing stable static elimination performance for a long time.
- * The louver and discharge needle unit can be attached and detached without tools, making maintenance easy.
- * Even when used for a long period of time, the discharge needle wears very little and does not need to be replaced due to wear.
- * In the event of a power failure or fan failure, an LED and fault signal will be used to notify you.
- * A locking mechanism is used to adjust the angle of the body, and the angle of the body is hard to change due to vibration, etc.
Spec
- Size (mm): 150 x 182 x 76
- Weight (kg): 1
- Ozone generation: 0.004 ppm or less (Distance 150 mm)
- Ion Balance (Distance 300 mm, Factory Default): ± 3 V or Less
- air volume : 1.4 to 3.5 m3/min
- Wind velocity: 1.5 to 2.9 m/sec (Straight Louver Distance 300 mm Center), 0.1 to 0.3 m/sec (Wide-angle Louver Distance 300 mm Center)
- Input power supply: DC24V (AC Adapter Included AC100 to 240 V Compatible)
- capacity: 12 VA
- Output Voltage: ± 7,500 V 0-P
- Accessories: AC adapter, wide-angle louver, lead wire for output signal (2 pieces Gumi)
- Static Elimination Time: 1.5 Seconds or Less (Distance 300 mm, Factory Default)
- environment used : Ambient Temperature : 0 to 40 ° C Ambient Humidity : 15 to 85 %RH (noncondensing)
- filters: prefilter class
- Output Signal: MOS FET Relay Non-Voltage Contact Output (NC Output) (OFF at high voltage error or fan error)
- Noise: 63 dB (A) (Distance 1m)
- material: Body/ABS Plastic, Discharge Needle/Tungsten, Stand/SECC, Louver/PC/ASA
Package size：290×200×140 mm 1.47 kg [About Package size]
| Order No. | 1-8517-31 | |
|---|---|---|
| Model No. | BF-X2ME | |
| Standard price |
JPY: 61,000
USD: 382.37
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. |
Type |
Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|---|
 |
1-8517-21 | ［Discontinued］Table Top Type Ionizer BF-X2MB | BF-X2MB | Blower | 1unit | JPY: 60,000 | USD: 376.11 |
-
|
|
 |
1-8517-22 | ［Discontinued］Table Top Type Ionizer BF-XMB | BF-XMB | Blower | 1unit | JPY: 50,000 | USD: 313.42 |
-
|
|
 |
1-8517-31 | Tabletop type Ionizer BF-X2ME | BF-X2ME | 1unit | JPY: 61,000 | USD: 382.37 |
|
||
 |
1-8517-32 | Tabletop Ionizer BF-XME | BF-XME | 1unit | JPY: 53,000 | USD: 332.23 |
|
Product Catalog
| Catalog Name | Page |
|---|---|
| AS ONE Catalog 2025 [Instruments for Laboratory] | 2531 |
| ASPURE Catalog 2025>2026 [Supplies for Clean Environment] | 139 |
| AS ONE Catalog 2023 [Instruments for Laboratory] | 3305 |
| AS ONE Catalog 2021 [Instruments for Laboratory] | 3149 |