AS ONE Corporation

1-5832-14　［Discontinued］Thermal Robo　TR-4AR

Features

All models are equipped with float-type fire prevention function.
Microcomputer type PID control achieves highly accurate temperature control.
The double-lock mechanism, consisting of two independent circuits, provides high safety.
Equipped with an on/off timer function, it is possible to start or stop automatically after a set time has elapsed.
The TR-S can be used at low water levels (45 mm) and is convenient for heating small samples.
* When using water instead of oil, set the upper limit of the set temperature to 80°C.
* Use an external (optional) cooling device to control the temperature below room temperature.
* External circulation is not possible due to propeller type stirring.

Type: Oil bus
external dimension: 140 x 150 x 310 mm
Temperature setting: R.T. + 5 to 180 ° C
temperature settings range: 2.0-+ 180.0 ° C
propeller stirring type
Temperature adjustment accuracy: ± 0.05 ° C (the performance of the controller. It depends on the usage condition
Function: Program (Up to 8 steps can be repeated), buzzer alarm, abnormal heat prevention device (thermostat), circuit protector and float type empty firing prevention
Sensor: platinum temperature resistance (Pt 100 Ω)
Heater capacity: 1.2 kW (stainless steel (SUS316))
Timer setting range: 1 minute to 99 hours (1 minute)
Clamp attachable width: 40 mm
power supply: AC100V 50 / 60Hz (Power Consumption: MAX 1.3 kVA)
* For temperature control below R.T., use external (Options) cooling equipment.　* Use silicon oil with a flash point of 300 ° C or higher and a viscosity of 100 cSt or less.　* External circulation is not possible because of propeller type agitation.　* water tank is not included.
Model Number: TR-4 AR

Package size：195×340×220 mm　　 [About Package size]

Order No.	1-5832-14
Model No.	TR-4AR
JAN Code	4580110236170
Standard price	JPY: 106,000 USD: 664.45 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1unit

Stock in Japan	-

Order No.	Name	Model No.	Temperature settings range	Chamber size (Vertical x Horizontal x Depth)	Quantity	Standard price	Valid price in Japan	Stock [Supplier Stock]
1-5832-11	［Discontinued］Thermal Robo (Adjustment Accuracy, From ±0.05℃)　TR-1AR	TR-1AR	R.T.+5 - 80℃	194 x 336 x 156mm	1unit	JPY: 60,000	USD: 376.11	-
1-5832-12	［Discontinued］Thermal Robo (Adjustment Accuracy, From ±0.02℃)　TR-2AR	TR-2AR	R.T.+5 - 80℃	194 x 336 x 156mm	1unit	JPY: 82,000	USD: 514.01	-
1-5832-13	［Discontinued］Thermal Robo (Adjustment Accuracy, From ±0.02℃) External Temperature Sensor Supported　TR-3AR	TR-3AR	R.T.+5 - 80℃	194 x 336 x 156mm	1unit	JPY: 102,000	USD: 639.38	-
1-5832-14	［Discontinued］Thermal Robo　TR-4AR	TR-4AR	R.T.+5 - 180℃		1unit	JPY: 106,000	USD: 664.45	-

1 / 1 ページ

1 / 1 ページ

Catalog Name	Page
AS ONE Catalog 2015 [Instruments for Laboratory]	30