Parker

Pneumatic Timer Parker PRT Series　PRT-E10

All logic units must be installed on separate 2- or 3-port bases, sold separately.
The logic unit has input (green) and output (red) pressure indicators to indicate the status of the corresponding signal.

Parker

Parker Pneumatic Logic Controller PLN Series　PLN-D10

All logic units must be installed on separate 2- or 3-port bases, sold separately.
The logic unit has input (green) and output (red) pressure indicators to indicate the status of the corresponding signal.

Parker

Pneumatic Timer Parker PRT Series　PRT-B10

All logic units must be installed on separate 2- or 3-port bases, sold separately.
The logic unit has input (green) and output (red) pressure indicators to indicate the status of the corresponding signal.

Parker

派克不锈钢女性液压快速连接接头SH3-62-BSPP3/8 in　SH3-62-BSPP

鞍钢303不锈钢。派克60系列液压应用快速连接联轴器。60系列是一种双关断联轴器，适用于软管频繁连接和断开的各种液压应用。配有双O形圈和不锈钢锁定球，耐用。特点和优点。BSPP螺纹尺寸硬化型乳头和套筒高流量高压密封设计卡套阀密封耐用的滚珠锁定机构温度范围:-40至+80°C。工业水力生产线食品和化工加工水和冷却液生产线移动设备

Parker

派克不锈钢男性液压快速连接接头SH3-63-BSPP3/8 in　SH3-63-BSPP

鞍钢303不锈钢。派克60系列液压应用快速连接联轴器。60系列是一种双关断联轴器，适用于软管频繁连接和断开的各种液压应用。配有双O形圈和不锈钢锁定球，耐用。特点和优点。BSPP螺纹尺寸硬化型乳头和套筒高流量高压密封设计卡套阀密封耐用的滚珠锁定机构温度范围:-40至+80°C。工业水力生产线食品和化工加工水和冷却液生产线移动设备

Parker

派克不锈钢男性液压快速连接接头SH4-63-BSPP1/2 in　SH4-63-BSPP

鞍钢303不锈钢。派克60系列液压应用快速连接联轴器。60系列是一种双关断联轴器，适用于软管频繁连接和断开的各种液压应用。配有双O形圈和不锈钢锁定球，耐用。特点和优点。BSPP螺纹尺寸硬化型乳头和套筒高流量高压密封设计卡套阀密封耐用的滚珠锁定机构温度范围:-40至+80°C。工业水力生产线食品和化工加工水和冷却液生产线移动设备

Parker

Parker黄铜女性液压快速连接接头BH2-60-BSPP1/4 in　BH2-60-BSPP

ISO7241-B。黄铜。派克60系列液压应用快速连接联轴器。60系列是一种双关断联轴器，适用于软管频繁连接和断开的各种液压应用。制造在黄铜与双O环和不锈钢锁紧球的耐用性。特点和优点。BSPP螺纹尺寸硬化型乳头和套筒高流量高压密封设计卡套阀密封耐用的滚珠锁定机构温度范围:-40至+80°C。工业水力生产线食品和化工加工水和冷却液生产线移动设备

Parker

派克液压吸管，SE75231210,50L/min 1英寸　SE75231210

完整的海贼王吸管。一种用于液压储罐和储罐的吸力过滤器。这些元件可以直接安装在泵吸入管路上，并应始终低于油箱的最低液面。端盖、内支撑气缸和滤料用环氧树脂粘合，形成一片对吸。

Parker

派克柱塞3/2气动手动控制阀PXC系列　PXC-M111

柱塞/弹簧阀。微型3口 (通过执行机构排气) 常闭阀。适用于受空间限制的工作区4毫米推入管连接适用于逻辑控制

Parker

Solenoid Coil P2F　P2FCB457

Viking Extreme Replacement Solenoid

Parker

Solenoid Coil P2F　P2FCB453

Viking Extreme Replacement Solenoid

Parker

Piping Mounting Hydraulic Ball Valve KH Series　KH14CFX

2-way ball valve
The Parker 2-way ball valve can block or unblock the flow of medium flow fluid.　This valve can be equipped with a locking device to prevent unauthorized opening and closing to keep the system safe.

Parker

Piping Mounting Hydraulic Ball Valve KH Series　KH38CFX

2-way ball valve
The Parker 2-way ball valve can block or unblock the flow of medium flow fluid.　This valve can be equipped with a locking device to prevent unauthorized opening and closing to keep the system safe.

Parker

Piping Mounting Hydraulic Ball Valve KH Series　KH12CFX

2-way ball valve
The Parker 2-way ball valve can block or unblock the flow of medium flow fluid.　This valve can be equipped with a locking device to prevent unauthorized opening and closing to keep the system safe.

Parker

Piping Mounting Hydraulic Ball Valve KH Series　KH1CFX

2-way ball valve
The Parker 2-way ball valve can block or unblock the flow of medium flow fluid.　This valve can be equipped with a locking device to prevent unauthorized opening and closing to keep the system safe.

Parker

Hydraulic Check Valve L3 Series　RHDI14CF

BSP check valve
Can be used in a wide range of applications with pressures up to 400 bar. The cracking pressure is 1 bar.　Made of galvanized steel, it uses a damped poppet check valve for controlled and smooth opening.

Parker

SAE法兰封头

Parker

BSP平行管道旋转

Parker

BSP平行管道旋转

Parker

活性炭滤芯CM-C2系列

Parker

螺旋滤芯CW系列

Parker

螺旋滤芯CW系列

Parker

螺旋滤芯CW系列

Parker

深度滤色器墨盒VBA系列

Parker

深度滤色器墨盒VBA系列

Parker

深度滤芯VBP系列

Parker

深度滤芯VBP系列

Parker

Depth Filter Cartridge Value Bond Nominal Series 0.5 500

Parker

Depth Filter Cartridge Value Bond Nominal Series 0.5 250

Parker

Pneumatic Timer Parker PRT Series　PRT-C10

All logic units must be installed on separate 2- or 3-port bases, sold separately.
The logic unit has input (green) and output (red) pressure indicators to indicate the status of the corresponding signal.

Parker

Pneumatic Timer Parker PRT Series　PRT-A10

All logic units must be installed on separate 2- or 3-port bases, sold separately.
The logic unit has input (green) and output (red) pressure indicators to indicate the status of the corresponding signal.

Parker

Pneumatic Manual Control Valve Parker PXB Series Plunger　PXB-B3111B

With actuator switch on control gear.
Valve and electric contact block

Parker

Pneumatic Manual Control Valve Parker PXB Series Plunger　PXB-B3921

With actuator switch on control gear.
Valve and electric contact block

Parker

［Discontinued］Replacement Oil Filter Element Parker 92 Series　926502

Visible pressure gauges are only for models ending with "V" No element status is displayed for models ending with "N"
spin-on filter

Parker

［Discontinued］Piping Mounting Hydraulic Ball Valve KH Series　KH34X

2-way ball valve
The Parker 2-way ball valve can block or unblock the flow of medium flow fluid.　This valve can be equipped with a locking device to prevent unauthorized opening and closing to keep the system safe.

Parker

［Discontinued］Hydraulic Check Valve L3 Series　RHDIR38CF

BSP check valve
Can be used in a wide range of applications with pressures up to 400 bar. The cracking pressure is 1 bar.　Made of galvanized steel, it uses a damped poppet check valve for controlled and smooth opening.

Parker

［Discontinued］Hydraulic Check Valve L3 Series　RHDI12CF

BSP check valve
Can be used in a wide range of applications with pressures up to 400 bar. The cracking pressure is 1 bar.　Made of galvanized steel, it uses a damped poppet check valve for controlled and smooth opening.

Parker

［Discontinued］Hydraulic Check Valve L3 Series　RHDIR34CF

BSP check valve
Can be used in a wide range of applications with pressures up to 400 bar. The cracking pressure is 1 bar.　Made of galvanized steel, it uses a damped poppet check valve for controlled and smooth opening.

Parker

［Discontinued］Hydraulic Check Valve RHZ18 Series　EW06LCF

Hydraulic systems operate at high pressures.　For EOR tube fittings to function safely, use only EOR parts in the assembly and do not exceed the pressure and temperature ratings.
Adjustable elbow and Swivel nut

Parker

［Discontinued］Hydraulic Gear Pump　3349111975

Constant Discharge Gear Pump, 1:8 Tapered Shaft
The Parker PGP/PGM 500 series gear pump improves the performance of the internationally popular "bushing block" type pumps. The PGP/PGM 500 series pumps combine excellent performance at high operating pressures, high efficiency and low noise. A wide range of standard options are available to meet specific needs around the world.