[SKF]火炬和手灯
过滤器
-
10mm深沟球轴承26mm O.D. W 6000-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 6,010
USD: 37.67
-
12mm深沟球轴承28mm O.D. W 6001-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 6,630
USD: 41.56
-
15mm深沟球轴承32mm O.D. W 6002-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 7,780
USD: 48.77
-
17mm深沟球轴承35mm O.D. W 6003-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 10,100
USD: 63.31
-
20mm深沟球轴承42mm O.D. W 6004-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 11,700
USD: 73.34
-
25mm深沟球轴承47mm O.D. W 6005-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 15,300
USD: 95.91
-
30mm深沟球轴承55mm O.D. W 6006-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 23,800
USD: 149.19
-
8毫米深沟球轴承22毫米O.D. W 608-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 6,420
USD: 40.24
-
12mm深沟球轴承32mm O.D. W 6201-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 8,290
USD: 51.97
-
15mm深沟球轴承35mm O.D. W 6202-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 8,400
USD: 52.66
-
17mm深沟球轴承40mm O.D. W 6203-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 10,100
USD: 63.31
-
20mm深沟球轴承47mm O.D. W 6204-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 13,000
USD: 81.49
-
25mm深沟球轴承52mm O.D. W 6205-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 14,600
USD: 91.52
-
30mm深沟球轴承62mm O.D. W 6206-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1找到 产品
JPY: 26,400
USD: 165.49
-
枕式铝块轴承SYWK 25 YTH, 25mm ID SYWK 25 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1找到 产品
JPY: 34,000
USD: 213.13
-
枕式铝块轴承SYWK 30 YTH, 30mm ID SYWK 30 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1找到 产品
JPY: 37,900
USD: 237.57
-
枕式铝块轴承SYWK 20 YTH, 20mm ID SYWK 20 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1找到 产品
JPY: 31,900
USD: 199.96
-
枕式铝块轴承SYWK 40 YTH, 40mm ID SYWK 40 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1找到 产品
JPY: 56,300
USD: 352.91
-
枕式铝块轴承SYFWK 40 LTHR, ID号40mm SYFWK 40 LTHR
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1找到 产品
JPY: 86,600
USD: 542.85
-
10mm深沟球轴承26mm O.D. 6000-2Z/C2
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 1,910
USD: 11.97
-
12mm深沟球轴承28mm O.D. 6001TN9/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 2,980
USD: 18.68
-
15mm深沟球轴承32mm O.D. 6002-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 6,070
USD: 38.05
-
20mm深沟球轴承42mm O.D. 6004-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 5,460
USD: 34.23
-
20mm深沟球轴承42mm O.D. 6004-2ZNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 4,460
USD: 27.96
-
25mm深沟球轴承47mm O.D. 6005-2RSH/C4
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 5,000
USD: 31.34
-
25mm深沟球轴承47mm O.D. 6005-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 6,100
USD: 38.24
-
25mm深沟球轴承47mm O.D. 6005-2ZNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 5,210
USD: 32.66
-
25mm深沟球轴承47mm O.D. 6005NR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 4,740
USD: 29.71
-
25mm深沟球轴承47mm O.D. 6005TN9/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 4,590
USD: 28.77
-
30mm深沟球轴承55mm O.D. 6006-2RS1NR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 7,460
USD: 46.76
-
40mm深沟球轴承68mm O.D. 6008NR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 6,980
USD: 43.75
-
8毫米深沟球轴承22毫米O.D. 608/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 1,090
USD: 6.83
-
8毫米深沟球轴承22毫米O.D. 608-Z
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 1,500
USD: 9.40
-
22mm深沟球轴承50mm O.D. 62/22
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 5,940
USD: 37.23
-
28mm深沟球轴承58mm O.D. 62/28-2RS1/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 12,400
USD: 77.73
-
12mm深沟球轴承32mm O.D. 6201-2RSHNR/C3GJN
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 3,500
USD: 21.94
-
16mm深沟球轴承35mm O.D. 6202/16-2Z
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 13,000
USD: 81.49
-
15mm深沟球轴承35mm O.D. 6202/C4
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 2,450
USD: 15.36
-
15mm深沟球轴承35mm O.D. 6202-2RSH/C4HT
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 5,100
USD: 31.97
-
15mm深沟球轴承35mm O.D. 6202-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1找到 产品
JPY: 4,630
USD: 29.02
