Unika Company Limited

用于驱动杆的八十片锚定装置

Unika Company Limited

用于驱动杆PT-30的Junikon锚

Unika Company Limited

用于驱动杆SD-30的Junikon锚

Unika Company Limited

BIC one专用驱动杆 (机械式SDS)

Unika Company Limited

双一高螺母专用驱动杆 (机械SDS)

Unika Company Limited

大一套组合BC-02

Unika Company Limited

树脂A 165 ml注射型GE-165

Unika Company Limited

小型无羽翼机F-425-SMP

Unika Company Limited

Mini Pack nonpluviousP-425PIM-SMP

Unika Company Limited

迷你无羽翼PW-425-SMP

Unika Company Limited

Driving bar for Root-Cut Anchor　58C

Drive rod for route-cut anchor.
It's for hand-handling.

Unika Company Limited

Non-Plavis Stainless Steel Sara B Drill Tsuki 150 Pieces　FS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

plug-less Anchor Non Plavis Stainless Steel Nabe B with Drill (150 bottles)　PS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

Resin A Metal Brush 10　RA-MB10

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 13　RA-MB13

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 18　RA-MB18

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 28　RA-MB28

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Resin A Sleeve 10 pieces　RA-P2085

Plastic sleeve used when resin A, GE type is used for hollow base material.
Plastic sleeve used when resin A or GE type is used for hollow base material

Unika Company Limited

Resin A Push pumps　RA-PUP

Used to remove chips after drilling in concrete.
Cleaning inside concrete holes

Unika Company Limited

驱动杆长SD-30S×1000的Junikon锚　SD30SX1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

驱动杆长SD-30S×500的Junikon锚　SD30SX500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 1000　SD30X1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 500　SD30X500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

SDS-MA x Bits 17.5 x 305 mm　SDSMAX17.5X305

SDS-max hammer drill exclusive bit that efficiently transmits strong striking rotational force to the cutting edge without loss.
The integrated design from the shank to the cutting edge makes it extremely powerful for through-hole and deep-hole work.

Unika Company Limited

Unicon Anchor Bucket Set　UB-01

A convenient set of Unicon anchors for use in the field.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Nhựa Một loại HC-U (loại nổi bật) HC-10 U

Unika Company Limited

树脂A SE型 (密封胶囊型) SE-10

Unika Company Limited

主机板锁定Clear PackB-405　B-405

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

主机板锁定Clear PackB-409　B-409

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

主机板锁定Clear PackB-416　B-416

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

主机板锁定Clear PackB-423　B-423

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

主机板锁定Clear PackB-427　B-427

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

主机板锁定Clear PackB-438　B-438

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

大1锚集BB-03　BB-03

This is a convenient set of Big One anchors for suspension mounting.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

无羽不锈钢B钻梨FS-525DN　FS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

非羽状银盘B钻梨P-535SDN　P-535-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

非羽状银盘B钻梨P-545SDN　P-545-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

非羽状银盘B钻梨P-560SDN　P-560-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

非羽状银盘B钻梨P-570SDN　P-570-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

不含PS-525DN不锈钢平底锅B钻　PS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.