[TOP KOGYO Co., Ltd.]名片架
过滤器
-
-
钴HSS钻(六轴， Ti涂层，Φ7.0 x刀锋长度70 x总长度110 mm)
11找到 产品
JPY: 2,750-
USD: 17.11-
-
-
-
-
-
螺旋步进钻(六轴、2刀片、电钻、Φ6~16 mm、步数:11、步长宽度:3.5mm)
3找到 产品
JPY: 10,071-
USD: 62.66-
-
-
Taper Pilot Hole Awl (十六进位刀柄，公称尺寸Φ2×槽长28×全长95 mm)
18找到 产品
JPY: 843-
USD: 5.25-
-
-
-
单触点式接头/Pilot Hole Awl Mini Type Set 3.0mm EBJ-3.0S
Can be attached to an electric drill with one touch by hexagonal shaft shank.
X-shaped thinning is applied to prevent the cutting edge from escaping.1找到 产品
JPY: 2,580
USD: 16.05
-
单触点式接头/Pilot Hole Awl Mini Type Set 4.0公厘 EBJ-4.0S
Can be attached to an electric drill with one touch by hexagonal shaft shank.
X-shaped thinning is applied to prevent the cutting edge from escaping.1找到 产品
JPY: 2,610
USD: 16.24
-
单触点式接头/Pilot Hole Awl Mini Type Set 5.0公厘 EBJ-5.0S
Can be attached to an electric drill with one touch by hexagonal shaft shank.
X-shaped thinning is applied to prevent the cutting edge from escaping.1找到 产品
JPY: 2,680
USD: 16.68
-
Bộ khoan Cobalt HSS (Trục Hex, 10 miếng) EOD-2050S
Can be attached to an electric drill with one touch by hexagonal shaft shank.
X-shaped thinning is applied to prevent the cutting edge from escaping.1找到 产品
JPY: 14,470
USD: 90.03
-
-
Máy Khoan Mái (Cho Mái Gấp) ESD-125R
This type is dedicated to the bottom hole of folded plate roof and roof bolt.
The use of anti-slip stoppers and rotating rings reduces scratches on the roof plate surface.1找到 产品
JPY: 9,000
USD: 56.00
-
Máy khoan HSS (Trục Hex, Công trình sắt, 1,5mm) ETD-15
X-shaped thinning is applied to the cutting edge, so the cutting edge does not escape and holes can be drilled in the precise position.
Work Material: Iron, Aluminum, Copper, Wood.1找到 产品
JPY: 593
USD: 3.69
-
Máy khoan HSS (Trục Hex, Công trình sắt, 2,5mm, 3 miếng Set)
4找到 产品
JPY: 1,930-
USD: 12.01-
-
Bộ Khoan (Trục Hex, Dài, Công Trình Sắt, 10 Miếng)
2找到 产品
JPY: 9,400-
USD: 58.49-
-
Thiết lập lỗ khoan thí điểm (Hex Shank, 8 miếng) ETK-2060S
Can be attached to an electric drill with one touch by hexagonal shaft shank.
X-shaped thinning is applied to prevent the cutting edge from escaping.1找到 产品
JPY: 9,930
USD: 61.78
-
混凝土钻孔组(六角仙客来10个) ECD-2560S
Can be attached to an electric drill with one touch by hexagonal shaft shank.
The blade tip is brazed with a special tip, allowing for smooth drilling.1找到 产品
JPY: 14,330
USD: 89.16
-
混凝土钻孔组(六角柄五块) ECD-3460
Can be attached to an electric drill with one touch by hexagonal shaft shank.
The blade tip is brazed with a special tip, allowing for smooth drilling.1找到 产品
JPY: 6,930
USD: 43.12
-
混凝土钻孔组(六角柄八块) ECD-3564
Can be attached to an electric drill with one touch by hexagonal shaft shank.
The blade tip is brazed with a special tip, allowing for smooth drilling.1找到 产品
JPY: 6,860
USD: 42.68
-
HSS钻孔(六轴，薄板，10.0公厘) ERD-10.0
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 3,110
USD: 19.35
-
HSS钻孔(六轴，薄板，2.8公厘) ERD-2.8
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 860
USD: 5.35
-
HSS钻孔(六轴，薄板，3.2公厘) ERD-3.2
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 930
USD: 5.79
-
HSS钻孔(六轴，薄板，3.3公厘) ERD-3.3
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 930
USD: 5.79
-
HSS钻孔(六轴，薄板，3.4毫米) ERD-3.4
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 930
USD: 5.79
-
HSS钻孔(六轴，薄板，3.8公厘) ERD-3.8
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 1,000
USD: 6.22
-
HSS钻孔(六轴，薄板，4.2公厘) ERD-4.2
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 1,110
USD: 6.91
-
HSS钻孔(六轴，薄板，7.0公厘) ERD-7.0
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 2,000
USD: 12.44
-
HSS钻孔(六轴，薄板，8.0公厘) ERD-8.0
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 2,180
USD: 13.56
-
HSS钻孔(六轴，薄板，9.0公厘) ERD-9.0
The cutting edge has a candle sharpening shape, so there is little burr even in thin plates.
With X-type thinning and unclearing (no margin), the target position can be drilled close to a perfect circle.1找到 产品
JPY: 2,680
USD: 16.68
-
螺旋步进钻 (圆轴) ESD-638SG
Long awaited large diameter size of round shaft shank type.
Work Material: Iron Plate (2 mm), Stainless Steel Plate (1 mm), Plastic, Wood.1找到 产品
JPY: 28,750
USD: 178.88
-
六角斜台阶钻 ESD-412T
A step drill for the tap bottom hole only.
With 6 sizes in one, you can drill under without having to replace the drill.1找到 产品
JPY: 10,786
USD: 67.11
-
六角斜台阶钻 ESD-512B
This is the industry's first dedicated step drill for bolt holes.
With 5 sizes in one, you can drill under without having to replace the drill.1找到 产品
JPY: 10,857
USD: 67.55
-
-
